| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20151115073105.GA18846@dhcp-128-65.nay.redhat.com>
Date: Sun, 15 Nov 2015 15:31:05 +0800
From: Dave Young <dyoung@...hat.com>
To: linux-wireless@...r.kernel.org
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
davem@...emloft.net, johannes@...solutions.net
Subject: [PATCH] wireless: change cfg80211 regulatory domain info as debug
messages
cfg80211 module prints a lot of messages like below. Actually printing
once is acceptable but sometimes it will print again and again, it looks
very annoying. It is better to change these detail messages to debugging
only.
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
The changes in this patch is to replace pr_info with pr_debug in function
print_rd_rules and print_regdomain_info
Signed-off-by: Dave Young <dyoung@...hat.com>
---
net/wireless/reg.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
--- linux.orig/net/wireless/reg.c
+++ linux/net/wireless/reg.c
@@ -2763,7 +2763,7 @@ static void print_rd_rules(const struct
const struct ieee80211_power_rule *power_rule = NULL;
char bw[32], cac_time[32];
- pr_info(" (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)\n");
+ pr_debug(" (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)\n");
for (i = 0; i < rd->n_reg_rules; i++) {
reg_rule = &rd->reg_rules[i];
@@ -2790,7 +2790,7 @@ static void print_rd_rules(const struct
* in certain regions
*/
if (power_rule->max_antenna_gain)
- pr_info(" (%d KHz - %d KHz @ %s), (%d mBi, %d mBm), (%s)\n",
+ pr_debug(" (%d KHz - %d KHz @ %s), (%d mBi, %d mBm), (%s)\n",
freq_range->start_freq_khz,
freq_range->end_freq_khz,
bw,
@@ -2798,7 +2798,7 @@ static void print_rd_rules(const struct
power_rule->max_eirp,
cac_time);
else
- pr_info(" (%d KHz - %d KHz @ %s), (N/A, %d mBm), (%s)\n",
+ pr_debug(" (%d KHz - %d KHz @ %s), (N/A, %d mBm), (%s)\n",
freq_range->start_freq_khz,
freq_range->end_freq_khz,
bw,
@@ -2831,35 +2831,35 @@ static void print_regdomain(const struct
struct cfg80211_registered_device *rdev;
rdev = cfg80211_rdev_by_wiphy_idx(lr->wiphy_idx);
if (rdev) {
- pr_info("Current regulatory domain updated by AP to: %c%c\n",
+ pr_debug("Current regulatory domain updated by AP to: %c%c\n",
rdev->country_ie_alpha2[0],
rdev->country_ie_alpha2[1]);
} else
- pr_info("Current regulatory domain intersected:\n");
+ pr_debug("Current regulatory domain intersected:\n");
} else
- pr_info("Current regulatory domain intersected:\n");
+ pr_debug("Current regulatory domain intersected:\n");
} else if (is_world_regdom(rd->alpha2)) {
- pr_info("World regulatory domain updated:\n");
+ pr_debug("World regulatory domain updated:\n");
} else {
if (is_unknown_alpha2(rd->alpha2))
- pr_info("Regulatory domain changed to driver built-in settings (unknown country)\n");
+ pr_debug("Regulatory domain changed to driver built-in settings (unknown country)\n");
else {
if (reg_request_cell_base(lr))
- pr_info("Regulatory domain changed to country: %c%c by Cell Station\n",
+ pr_debug("Regulatory domain changed to country: %c%c by Cell Station\n",
rd->alpha2[0], rd->alpha2[1]);
else
- pr_info("Regulatory domain changed to country: %c%c\n",
+ pr_debug("Regulatory domain changed to country: %c%c\n",
rd->alpha2[0], rd->alpha2[1]);
}
}
- pr_info(" DFS Master region: %s", reg_dfs_region_str(rd->dfs_region));
+ pr_debug(" DFS Master region: %s", reg_dfs_region_str(rd->dfs_region));
print_rd_rules(rd);
}
static void print_regdomain_info(const struct ieee80211_regdomain *rd)
{
- pr_info("Regulatory domain: %c%c\n", rd->alpha2[0], rd->alpha2[1]);
+ pr_debug("Regulatory domain: %c%c\n", rd->alpha2[0], rd->alpha2[1]);
print_rd_rules(rd);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists