linux-kernel - Re: [PATCH 1/2] leds-bcm6328: Reuse bcm6328_led_set() instead of copying its functionality

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-id: <5649EA72.20504@samsung.com>
Date:	Mon, 16 Nov 2015 15:38:42 +0100
From:	Jacek Anaszewski <j.anaszewski@...sung.com>
To:	Simon Arlott <simon@...e.lp0.eu>
Cc:	Álvaro Fernández Rojas <noltari@...il.com>,
	Jonas Gorski <jogo@...nwrt.org>,
	Richard Purdie <rpurdie@...ys.net>, linux-leds@...r.kernel.org,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/2] leds-bcm6328: Reuse bcm6328_led_set() instead of
 copying its functionality

Hi Simon,

On 11/15/2015 02:32 PM, Simon Arlott wrote:
> When ensuring a consistent initial LED state in bcm6328_led (as they may
> be blinking instead of on/off), the LED register is set using an inverted
> copy of bcm6328_led_set(). To avoid further errors relating to active low
> handling, call this function directly instead.
>
> Signed-off-by: Simon Arlott <simon@...e.lp0.eu>
> ---
> I've decided not to move the locking as it should really cover the
> setting of led->cdev.brightness too (not that it matters as the device
> is not yet registered).
>
>   drivers/leds/leds-bcm6328.c | 8 ++------
>   1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/leds/leds-bcm6328.c b/drivers/leds/leds-bcm6328.c
> index c7ea5c6..95d0cf9 100644
> --- a/drivers/leds/leds-bcm6328.c
> +++ b/drivers/leds/leds-bcm6328.c
> @@ -314,14 +314,10 @@ static int bcm6328_led(struct device *dev, struct device_node *nc, u32 reg,
>   	} else {
>   		led->cdev.brightness = LED_OFF;
>   	}
> -
> -	if ((led->active_low && led->cdev.brightness == LED_FULL) ||
> -	    (!led->active_low && led->cdev.brightness == LED_OFF))
> -		bcm6328_led_mode(led, BCM6328_LED_MODE_ON);
> -	else
> -		bcm6328_led_mode(led, BCM6328_LED_MODE_OFF);
>   	spin_unlock_irqrestore(lock, flags);
>
> +	bcm6328_led_set(&led->cdev, led->cdev.brightness);
> +

You're not protecting bcm6328_led_set with spin_lock here.
Please describe why this is not needed in the commit message.

>   	led->cdev.brightness_set = bcm6328_led_set;
>   	led->cdev.blink_set = bcm6328_blink_set;
>
>


-- 
Best Regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/