[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1447817403-16631-1-git-send-email-bayi.cheng@mediatek.com>
Date: Wed, 18 Nov 2015 11:30:01 +0800
From: Bayi Cheng <bayi.cheng@...iatek.com>
To: David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>
CC: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Daniel Kurtz <djkurtz@...omium.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-mtd@...ts.infradead.org>,
<srv_heupstream@...iatek.com>, <jteki@...nedev.com>,
<ezequiel@...guardiasur.com.ar>
Subject: [PATCH v8 0/2] Mediatek SPI-NOR flash driver
This series is based on v4.4-rc1 and l2-mtd.git [0] and erase_sector
implementation patch [1]
[0]: git://git.infradead.org/l2-mtd.git
[1]: http://lists.infradead.org/pipermail/linux-mtd/2015-October//062959.html
Change in v8:
1: rewrite the macro MTK_NOR_MAX_SHIFT from 6 to 7
2: add a new macro MTK_NOR_MAX_RX_TX_SHIFT for max len of TX&RX
Change in v7:
1: change PRGDATA3 to PRGDATA4 for quad mode
2: drop PRGDATA3 for signal read mode
3: drop unnecessary partition parser data
4: convert mtd_device_parse_register to mtd_device_register
5: disable clocks on failure
Change in v6:
1: delete mt8173_nor_do_rx
2: delete mt8173_nor_do_rx
3: add mt8173_nor_do_tx_rx for general usage
4: support nor flash with 6 IDs
5: delete mt8173_nor_erase_sector and use "nor->erase_opcode"
6: add mt8173_nor_set_addr to programming the address register
7: initialize the ppdata in mtk_nor_init
Change in v5:
1: add "status = "disable"" to device tree
2: add document "flash" node
3: fix some statement error in Kconfig file
4: fix alphabetical order error in makefile
5: delete the parament "mtd_info *mtd" in mt8173_nor structure
6: delete SPINOR_OP_WREN repeated calls
7: add mt8173_nor_do_tx & mt8173_nor_do_rx for them full potential
8: use a subnode to represent the flash
Change in v4:
1: delete the parament "write_enable" for mt8173_nor_write_reg
2: fix the build warning for calling mt8173_nor_write_single_byte
Change in v3:
1: use switch() to replace some if-else statement
2: use shifts to replace endianness statement
3: delete some unused macros
4: use auto-increment mechanism for single write
5: write address added to 32bytes
Change in v2:
1. Rebase to 4.3-rc1
2. propagate error code
3. delete mux clock and axi clock in dts file
4. descripts more exactly for binding file
5. change file names from mtk-nor.c to mtk_quadspi.c
6. delete some functions witch were used once time
Bayi Cheng (2):
mtd: mtk-nor: mtk serial flash controller driver
arm64: dts: mt8173: Add nor flash node
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 18 +-
drivers/mtd/spi-nor/Kconfig | 7 +
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/mtk-quadspi.c | 483 +++++++++++++++++++++++++++++++
4 files changed, 508 insertions(+), 1 deletion(-)
create mode 100644 drivers/mtd/spi-nor/mtk-quadspi.c
--
1.8.1.1.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists