[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1447922229-60552-1-git-send-email-zhongkaihua@huawei.com>
Date: Thu, 19 Nov 2015 16:37:08 +0800
From: Zhong Kaihua <zhongkaihua@...wei.com>
To: <robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<catalin.marinas@....com>, <will.deacon@....com>,
<xuwei5@...ilicon.com>, <tyler.baker@...aro.org>,
<bintian.wang@...wei.com>, <haojian.zhuang@...aro.org>,
<xuyiping@...ilicon.com>, <arnd@...db.de>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
CC: <w.f@...wei.com>, <dan.zhao@...ilicon.com>,
<zhongkaihua@...wei.com>, <kkojima@...ne.co.jp>,
<suzhuangluan@...ilicon.com>, <puck.chen@...ilicon.com>,
<kong.kongxinwei@...ilicon.com>
Subject: [PATCH V2 1/2] dt-bindings: spi: Documentation for Hi6220 spi driver
dt-bindings: spi: Documentation for Hi6220 spi driver
Signed-off-by: Zhong Kaihua <zhongkaihua@...wei.com>
---
.../devicetree/bindings/spi/spi-hi6220.txt | 45 ++++++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-hi6220.txt
diff --git a/Documentation/devicetree/bindings/spi/spi-hi6220.txt b/Documentation/devicetree/bindings/spi/spi-hi6220.txt
new file mode 100644
index 0000000..91aa169
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-hi6220.txt
@@ -0,0 +1,45 @@
+Hi6220 SPI controller
+
+Required properties:
+- compatible : "arm,pl022", "arm,primecell"
+- reg : Offset and length of the register set for the device
+- interrupts : Should contain SPI controller interrupt
+- num-cs : total number of chipselects
+
+Required Board Specific Properties:
+
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+Optional properties:
+- cs-gpios : should specify GPIOs used for chipselects.
+ The gpios will be referred to as reg = <index> in the SPI child nodes.
+ If unspecified, a single SPI device without a chip select can be used.
+- dmas : Two or more DMA channel specifiers following the convention outlined
+ in bindings/dma/dma.txt
+- dma-names: Names for the dma channels, if present. There must be at
+ least one channel named "tx" for transmit and named "rx" for
+ receive.
+
+Example:
+ spi_0: spi@...06000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x0 0xf7106000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 50 4>;
+ bus-id = <0>;
+ enable-dma = <1>;
+ dmas = <&dma0 12 &dma0 13>;
+ dma-names = "rx", "tx";
+
+ clocks = <&clock_sys HI6220_SPI_CLK>;
+ clock-names = "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pmx_func &spi0_cfg_func>;
+ num-cs = <4>;
+ cs-gpios = <&gpio6 2 0>, <&gpio6 3 0>, <&gpio6 4 0>, <&gpio6 5 0>;
+
+ status = "ok";
+ };
+
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists