linux-kernel - RE: [PATCH v10 2/8] Input: goodix

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:	Thu, 19 Nov 2015 11:55:27 +0000
From:	"Tirdea, Irina" <irina.tirdea@...el.com>
To:	Rob Herring <robh@...nel.org>
CC:	Dmitry Torokhov <dmitry.torokhov@...il.com>,
	Bastien Nocera <hadess@...ess.net>,
	Aleksei Mamlin <mamlinav@...il.com>,
	Karsten Merker <merker@...ian.org>,
	"linux-input@...r.kernel.org" <linux-input@...r.kernel.org>,
	Mark Rutland <mark.rutland@....com>,
	"Purdila, Octavian" <octavian.purdila@...el.com>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
Subject: RE: [PATCH v10 2/8] Input: goodix - reset device at init



> -----Original Message-----
> From: Rob Herring [mailto:robh@...nel.org]
> Sent: 18 November, 2015 23:24
> To: Tirdea, Irina
> Cc: Dmitry Torokhov; Bastien Nocera; Aleksei Mamlin; Karsten Merker; linux-input@...r.kernel.org; Mark Rutland; Purdila, Octavian;
> linux-kernel@...r.kernel.org; devicetree@...r.kernel.org
> Subject: Re: [PATCH v10 2/8] Input: goodix - reset device at init
> 
> On Wed, Nov 18, 2015 at 06:31:35PM +0200, Irina Tirdea wrote:
> > After power on, it is recommended that the driver resets the device.
> > The reset procedure timing is described in the datasheet and is used
> > at device init (before writing device configuration) and
> > for power management. It is a sequence of setting the interrupt
> > and reset pins high/low at specific timing intervals. This procedure
> > also includes setting the slave address to the one specified in the
> > ACPI/device tree.
> >
> > This is based on Goodix datasheets for GT911 and GT9271 and on Goodix
> > driver gt9xx.c for Android (publicly available in Android kernel
> > trees for various devices).
> >
> > For reset the driver needs to control the interrupt and
> > reset gpio pins (configured through ACPI/device tree). For devices
> > that do not have the gpio pins properly declared, the functionality
> > depending on these pins will not be available, but the device can still
> > be used with basic functionality.
> >
> > For both device tree and ACPI, the interrupt gpio pin configuration is
> > read from the "irq-gpio" property and the reset pin configuration is
> > read from the "reset-gpio" property. For ACPI 5.1, named properties
> > can be specified using the _DSD section. This functionality will not be
> > available for devices that use indexed gpio pins declared in the _CRS
> > section (we need to provide backward compatibility with devices
> > that do not support using the interrupt gpio pin as output).
> >
> > For ACPI, the pins can be specified using ACPI 5.1:
> > Device (STAC)
> > {
> >     Name (_HID, "GDIX1001")
> >     ...
> >
> >     Method (_CRS, 0, Serialized)
> >     {
> >         Name (RBUF, ResourceTemplate ()
> >         {
> >             I2cSerialBus (0x0014, ControllerInitiated, 0x00061A80,
> >                 AddressingMode7Bit, "\\I2C0",
> >                 0x00, ResourceConsumer, ,
> >                 )
> >
> >             GpioInt (Edge, ActiveHigh, Exclusive, PullNone, 0x0000,
> >                 "\\I2C0", 0x00, ResourceConsumer, ,
> >                  )
> >                  {   // Pin list
> >                      0
> >                  }
> >
> >             GpioIo (Exclusive, PullDown, 0x0000, 0x0000,
> >                 IoRestrictionOutputOnly, "\\I2C0", 0x00,
> >                 ResourceConsumer, ,
> >                 )
> >                 {
> >                      1
> >                 }
> >         })
> >         Return (RBUF)
> >     }
> >
> >     Name (_DSD,  Package ()
> >     {
> >         ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> >         Package ()
> >         {
> >             Package (2) {"irq-gpio", Package() {^STAC, 0, 0, 0 }},
> >             Package (2) {"reset-gpio", Package() {^STAC, 1, 0, 0 }},
> >             ...
> >         }
> >     }
> >
> > Signed-off-by: Octavian Purdila <octavian.purdila@...el.com>
> > Signed-off-by: Irina Tirdea <irina.tirdea@...el.com>
> > ---
> >  .../bindings/input/touchscreen/goodix.txt          |   5 +
> >  drivers/input/touchscreen/Kconfig                  |   1 +
> >  drivers/input/touchscreen/goodix.c                 | 101 +++++++++++++++++++++
> >  3 files changed, 107 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> > index 8ba98ee..7137881 100644
> > --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> > +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> > @@ -12,6 +12,8 @@ Required properties:
> >   - reg			: I2C address of the chip. Should be 0x5d or 0x14
> >   - interrupt-parent	: Interrupt controller to which the chip is connected
> >   - interrupts		: Interrupt to which the chip is connected
> > + - irq-gpio		: GPIO pin used for IRQ
> 
> Please note here why you need this in addition to just "interrupts".

Ok.

> Also, it should be irq-gpios instead.
> 
> > + - reset-gpio		: GPIO pin used for reset
> 
> Should be reset-gpios instead.
> 

I'll fix this, I wasn't aware that irq/reset-gpio is deprecated.

Thanks,
Irina

> Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/