| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <564DD11D.2060101@ti.com>
Date: Thu, 19 Nov 2015 19:09:41 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Alim Akhtar <alim.akhtar@...sung.com>,
<linux-scsi@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <JBottomley@...n.com>, <vinholikatti@...il.com>,
<gautam.vivek@...sung.com>, <essuuj@...il.com>,
<devicetree@...r.kernel.org>
Subject: Re: [PATCH v5 02/11] phy: exynos-ufs: add UFS PHY driver for EXYNOS
SoC
Hi,
On Tuesday 17 November 2015 01:41 PM, Alim Akhtar wrote:
> Hi
> Thanks again for looking into this.
>
> On 11/17/2015 11:46 AM, Kishon Vijay Abraham I wrote:
>> Hi,
>>
>> On Monday 09 November 2015 10:56 AM, Alim Akhtar wrote:
>>> From: Seungwon Jeon <essuuj@...il.com>
>>>
>>> This patch introduces Exynos UFS PHY driver. This driver
>>> supports to deal with phy calibration and power control
>>> according to UFS host driver's behavior.
>>>
>>> Signed-off-by: Seungwon Jeon <essuuj@...il.com>
>>> Signed-off-by: Alim Akhtar <alim.akhtar@...sung.com>
>>> Cc: Kishon Vijay Abraham I <kishon@...com>
>>> ---
>>> drivers/phy/Kconfig | 7 ++
>>> drivers/phy/Makefile | 1 +
>>> drivers/phy/phy-exynos-ufs.c | 241
>>> ++++++++++++++++++++++++++++++++++++
>>> drivers/phy/phy-exynos-ufs.h | 85 +++++++++++++
>>> drivers/phy/phy-exynos7-ufs.h | 89 +++++++++++++
>>> include/linux/phy/phy-exynos-ufs.h | 85 +++++++++++++
>>> 6 files changed, 508 insertions(+)
>>> create mode 100644 drivers/phy/phy-exynos-ufs.c
>>> create mode 100644 drivers/phy/phy-exynos-ufs.h
>>> create mode 100644 drivers/phy/phy-exynos7-ufs.h
>>> create mode 100644 include/linux/phy/phy-exynos-ufs.h
>>>
>>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>>> index 7eb5859dd035..7d38a92e0297 100644
>>> --- a/drivers/phy/Kconfig
>>> +++ b/drivers/phy/Kconfig
>>> @@ -389,4 +389,11 @@ config PHY_CYGNUS_PCIE
>>> Enable this to support the Broadcom Cygnus PCIe PHY.
>>> If unsure, say N.
>>>
>>> +config PHY_EXYNOS_UFS
>>> + tristate "EXYNOS SoC series UFS PHY driver"
>>> + depends on OF && ARCH_EXYNOS || COMPILE_TEST
>>> + select GENERIC_PHY
>>> + help
>>> + Support for UFS PHY on Samsung EXYNOS chipsets.
>>> +
>>> endmenu
>>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
>>> index 075db1a81aa5..9bec4d1a89e1 100644
>>> --- a/drivers/phy/Makefile
>>> +++ b/drivers/phy/Makefile
>>> @@ -10,6 +10,7 @@ obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) +=
>>> phy-armada375-usb2.o
>>> obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
>>> obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
>>> obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
>>> +obj-$(CONFIG_PHY_EXYNOS_UFS) += phy-exynos-ufs.o
>>> obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
>>> obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
>>> obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
>>> diff --git a/drivers/phy/phy-exynos-ufs.c b/drivers/phy/phy-exynos-ufs.c
>>> new file mode 100644
>>> index 000000000000..cb1aeaa3d4eb
>>> --- /dev/null
>>> +++ b/drivers/phy/phy-exynos-ufs.c
>>> @@ -0,0 +1,241 @@
>>> +/*
>>> + * UFS PHY driver for Samsung EXYNOS SoC
>>> + *
>>> + * Copyright (C) 2015 Samsung Electronics Co., Ltd.
>>> + * Author: Seungwon Jeon <essuuj@...il.com>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License as published by
>>> + * the Free Software Foundation; either version 2 of the License, or
>>> + * (at your option) any later version.
>>> + */
>>> +#include <linux/clk.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/err.h>
>>> +#include <linux/io.h>
>>> +#include <linux/iopoll.h>
>>> +#include <linux/mfd/syscon.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of.h>
>>> +#include <linux/phy/phy.h>
>>> +#include <linux/phy/phy-exynos-ufs.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/regmap.h>
>>> +
>>> +#include "phy-exynos-ufs.h"
>>> +
>>> +#define for_each_phy_lane(phy, i) \
>>> + for (i = 0; i < (phy)->lane_cnt; i++)
>>> +#define for_each_phy_cfg(cfg) \
>>> + for (; (cfg)->id; (cfg)++)
>>> +
>>> +#define PHY_DEF_LANE_CNT 1
>>> +
>>> +static void exynos_ufs_phy_config(struct exynos_ufs_phy *phy,
>>> + const struct exynos_ufs_phy_cfg *cfg, u8 lane)
>>> +{
>>> + enum {LANE_0, LANE_1}; /* lane index */
>>> +
>>> + switch (lane) {
>>> + case LANE_0:
>>> + writel(cfg->val, (phy)->reg_pma + cfg->off_0);
>>> + break;
>>> + case LANE_1:
>>> + if (cfg->id == PHY_TRSV_BLK)
>>> + writel(cfg->val, (phy)->reg_pma + cfg->off_1);
>>> + break;
>>> + }
>>> +}
>>> +
>>> +static bool match_cfg_to_pwr_mode(u8 desc, u8 required_pwr)
>>> +{
>>> + if (IS_PWR_MODE_ANY(desc))
>>> + return true;
>>> +
>>> + if (IS_PWR_MODE_HS(required_pwr) && IS_PWR_MODE_HS_ANY(desc))
>>> + return true;
>>> +
>>> + if (COMP_PWR_MODE(required_pwr, desc))
>>> + return true;
>>> +
>>> + if (COMP_PWR_MODE_MD(required_pwr, desc) &&
>>> + COMP_PWR_MODE_GEAR(required_pwr, desc) &&
>>> + COMP_PWR_MODE_SER(required_pwr, desc))
>>> + return true;
>>> +
>>> + return false;
>>> +}
>>> +
>>> +int exynos_ufs_phy_calibrate(struct phy *phy,
>>> + enum phy_cfg_tag tag, u8 pwr)
>>
>> This is similar to the first version of your patch without EXPORT_SYMBOL.
>>
>> I think you have to create a new generic PHY_OPS for calibrate PHY while making
>> sure that it is as generic as possible (which means calibrate_phy shouldn't
>> have tag and pwr arguments or a strong justification as to why those arguments
>> are required in a generic API).
> I don't see the advantage to making this a generic phy_ops, this is exynos
> specific ufs-phy, please have a look at other implementations
only the implementation is specific to exynos. I've seen lot of other vendors
want to do something like calibrate phy.
So if we add something like (*calibrate)(struct phy *phy), then it can be used
by others as well. Russell King also want to minimize the code to program
calibration settings. So it would be good to come up with a set of standard
bindings like 'phy,tx-swing', 'phy,emphasis', 'phy,amplitude' etc.. to program
these settings.
> drivers/phy/phy-qcom-ufs.c (which I belive mereged recently)
Thats why I hate when someone else merge PHY drivers :-( That driver can as
well be in drivers/misc as it doesn't use PHY framework as it is supposed to be
used. It just exports a dozen of API's to be used by controller drivers. ick..
> may be other vendors might come with there own implementation of phy.
right, it's all about providing the correct callback functions.
> I am using what is currently provided by the generic phy framework.
I think for your use case, what is currently provided in the PHY framework is
not sufficient.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists