| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1448027966-21610-1-git-send-email-grygorii.strashko@ti.com>
Date: Fri, 20 Nov 2015 15:59:26 +0200
From: Grygorii Strashko <grygorii.strashko@...com>
To: Kishon Vijay Abraham I <kishon@...com>,
Bjorn Helgaas <bhelgaas@...gle.com>
CC: <tony@...mide.com>, <nsekhar@...com>, <linux-omap@...r.kernel.org>,
<linux-pci@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Grygorii Strashko <grygorii.strashko@...com>,
Thomas Gleixner <tglx@...utronix.de>,
Sebastian Andrzej Siewior <bigeasy@...utronix.de>
Subject: [PATCH v2] PCI: dra7xx: mark dra7xx_pcie_msi irq as IRQF_NO_THREAD
On -RT, TI DRA7 PCIe driver always produces below backtrace when the
first PCI interrupt is triggered:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 82 at kernel/irq/handle.c:150 handle_irq_event_percpu+0x14c/0x174()
irq 460 handler irq_default_primary_handler+0x0/0x14 enabled interrupts
Modules linked in: ahci_platform(+) ti_vip(+) libahci_platform xhci_pci(+) c_can_platform(+)
libahci xhci_hcd ti_vpe c_can libata v4l2_mem2mem can_dev gpio_keys leds_gpio
snd_soc_simple_card usbcore spi_ti_qspi videobuf2_core extcon_usb_gpio omap_wdt
ti_vpdma videobuf2_dma_contig ti_soc_thermal videobuf2_memops dwc3_omap extcon
rtc_omap ov1063x v4l2_common videodev media snd_soc_tlv320aic3x omap_rng rng_core omap_remoteproc
CPU: 1 PID: 82 Comm: irq/26-dra7-pci Not tainted 4.1.10-rt10-02638-g6486d7e-dirty #1
Hardware name: Generic DRA74X (Flattened Device Tree)
Backtrace:
[<c0013060>] (dump_backtrace) from [<c0013280>] (show_stack+0x18/0x1c)
r7:c07acca0 r6:00000000 r5:c09034e4 r4:00000000
[<c0013268>] (show_stack) from [<c061ef14>] (dump_stack+0x90/0xac)
[<c061ee84>] (dump_stack) from [<c00436e4>] (warn_slowpath_common+0x7c/0xb8)
r7:c07acca0 r6:00000096 r5:00000009 r4:ee4d3e38
[<c0043668>] (warn_slowpath_common) from [<c0043758>] (warn_slowpath_fmt+0x38/0x40)
r8:ee3fcc00 r7:000001cc r6:00000000 r5:00000002 r4:c07acc78
[<c0043724>] (warn_slowpath_fmt) from [<c0085fd0>] (handle_irq_event_percpu+0x14c/0x174)
r3:000001cc r2:c07acc78
r4:ecfcdd80
[<c0085e84>] (handle_irq_event_percpu) from [<c008607c>] (handle_irq_event+0x84/0xb8)
r10:00000001 r9:ee4b59c0 r8:ee1d0900 r7:00000001 r6:00000000 r5:ecfcdd80
r4:ee3fcc00
[<c0085ff8>] (handle_irq_event) from [<c0089240>] (handle_simple_irq+0x90/0x118)
r5:ee4a9020 r4:ee3fcc00
[<c00891b0>] (handle_simple_irq) from [<c0085514>] (generic_handle_irq+0x30/0x44)
r5:ee4a9020 r4:000001cc
[<c00854e4>] (generic_handle_irq) from [<c034a7d4>] (dra7xx_pcie_msi_irq_handler+0x7c/0x8c)
r5:ee4a9020 r4:00000001
[<c034a758>] (dra7xx_pcie_msi_irq_handler) from [<c0086f08>] (irq_forced_thread_fn+0x28/0x5c)
r5:ee1d0900 r4:ee4b59c0
[<c0086ee0>] (irq_forced_thread_fn) from [<c00871dc>] (irq_thread+0x128/0x204)
r7:00000001 r6:00000000 r5:ee4d2000 r4:ee4b59e4
[<c00870b4>] (irq_thread) from [<c005e2fc>] (kthread+0xd4/0xec)
r10:00000000 r9:00000000 r8:00000000 r7:c00870b4 r6:ee4b59c0 r5:ee4b5a00
r4:00000000
[<c005e228>] (kthread) from [<c000faa8>] (ret_from_fork+0x14/0x2c)
r7:00000000 r6:00000000 r5:c005e228 r4:ee4b5a00
---[ end trace 0000000000000002 ]---
This backtrace is triggered because dra7xx_pcie_msi_irq_handler()
forced to be threaded by default on -RT but, in the same time, it's
IRQ dispatcher and calls generic_handle_irq(), which leads to
handle_simple_irq() call. The handle_simple_irq() expected to be
called with IRQ disabled.
The same issue will also happen if kernel will boot with "threadirqs"
cmdline parameter (CONFIG_IRQ_FORCED_THREADING).
As discussed in [1], the current DRA7 PCIe hw configuration supports
32 interrupts, which cannot change because it's hardwired in silicon,
this is a single status read and assuming that only a few (most of the
time it will be exactly ONE) of those interrupts are pending at the
same time is pretty much a sane assumption. And recommended fix for
this issue is to request dra7xx_pcie_msi IRQ with IRQF_NO_THREAD flag.
[1] https://lkml.org/lkml/2015/11/3/660
Cc: Thomas Gleixner <tglx@...utronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@...utronix.de>
Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
---
Changes in v2:
- comment in code truncated
Link on v1:
https://lkml.org/lkml/2015/11/5/593
drivers/pci/host/pci-dra7xx.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
index 8c36880..0415192 100644
--- a/drivers/pci/host/pci-dra7xx.c
+++ b/drivers/pci/host/pci-dra7xx.c
@@ -301,8 +301,19 @@ static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
return -EINVAL;
}
+ /*
+ * Mark dra7xx_pcie_msi IRQ as IRQF_NO_THREAD
+ * On -RT and if kernel is booting with "threadirqs" cmd line parameter
+ * the dra7xx_pcie_msi_irq_handler() will be forced threaded but,
+ * in the same time, it's IRQ dispatcher and calls generic_handle_irq(),
+ * which, in turn, will be resolved to handle_simple_irq() call.
+ * The handle_simple_irq() expected to be called with IRQ disabled, as
+ * result kernle will display warning:
+ * "irq XXX handler YYY+0x0/0x14 enabled interrupts".
+ */
ret = devm_request_irq(&pdev->dev, pp->irq,
- dra7xx_pcie_msi_irq_handler, IRQF_SHARED,
+ dra7xx_pcie_msi_irq_handler,
+ IRQF_SHARED | IRQF_NO_THREAD,
"dra7-pcie-msi", pp);
if (ret) {
dev_err(&pdev->dev, "failed to request irq\n");
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists