[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20151120153309.GA4944@rob-hp-laptop>
Date: Fri, 20 Nov 2015 09:33:09 -0600
From: Rob Herring <robh@...nel.org>
To: Pramod Kumar <pramodku@...adcom.com>
Cc: Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>, Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Russell King <linux@....linux.org.uk>,
Linus Walleij <linus.walleij@...aro.org>,
linux-gpio@...r.kernel.org,
BCM Kernel Feedback <bcm-kernel-feedback-list@...adcom.com>,
Jason Uy <jasonuy@...adcom.com>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Thomas Gleixner <tglx@...utronix.de>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, Jonas Gorski <jogo@...nwrt.org>
Subject: Re: [PATCH v2 1/7] dt-binding: Add ngpios property to GPIO
controller node
On Thu, Nov 19, 2015 at 09:22:13AM +0530, Pramod Kumar wrote:
> Add ngpios property to the gpio controller's DT node so that controller
> driver extracts total number of in-use gpio lines from DT and removes
> dependency on driver.
>
> Signed-off-by: Pramod Kumar <pramodku@...adcom.com>
> Reviewed-by: Ray Jui <rjui@...adcom.com>
> Reviewed-by: Scott Branden <sbranden@...adcom.com>
Acked-by: Rob Herring <robh@...nel.org>
> ---
> Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> index 16589fb6..8b1e5d1 100644
> --- a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> @@ -10,6 +10,9 @@ Required properties:
> Define the base and range of the I/O address space that contains the Cygnus
> GPIO/PINCONF controller registers
>
> +- ngpios:
> + Total number of in-use slots in GPIO controller
> +
> - #gpio-cells:
> Must be two. The first cell is the GPIO pin number (within the
> controller's pin space) and the second cell is used for the following:
> @@ -57,6 +60,7 @@ Example:
> compatible = "brcm,cygnus-ccm-gpio";
> reg = <0x1800a000 0x50>,
> <0x0301d164 0x20>;
> + ngpios = <24>;
> #gpio-cells = <2>;
> gpio-controller;
> interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> @@ -78,6 +82,7 @@ Example:
> gpio_asiu: gpio@...a5000 {
> compatible = "brcm,cygnus-asiu-gpio";
> reg = <0x180a5000 0x668>;
> + ngpios = <146>;
> #gpio-cells = <2>;
> gpio-controller;
> interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists