linux-kernel - Re: [PATCH v4 2/2] usb: dwc2: host: Clear interrupts before handling them

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <87y4dsd6hr.fsf@saruman.tx.rr.com>
Date:	Fri, 20 Nov 2015 09:40:16 -0600
From:	Felipe Balbi <balbi@...com>
To:	Douglas Anderson <dianders@...omium.org>,
	John Youn <John.Youn@...opsys.com>
CC:	Yunzhi Li <lyz@...k-chips.com>,
	Heiko Stübner <heiko@...ech.de>,
	<linux-rockchip@...ts.infradead.org>,
	Julius Werner <jwerner@...omium.org>,
	<gregory.herrero@...el.com>, <yousaf.kaukab@...el.com>,
	<dinguyen@...nsource.altera.com>,
	Douglas Anderson <dianders@...omium.org>,
	<johnyoun@...opsys.com>, <gregkh@...uxfoundation.org>,
	<linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v4 2/2] usb: dwc2: host: Clear interrupts before handling them


Hi,

Douglas Anderson <dianders@...omium.org> writes:
> In general it is wise to clear interrupts before processing them.  If
> you don't do that, you can get:
>  1. Interrupt happens
>  2. You look at system state and process interrupt
>  3. A new interrupt happens
>  4. You clear interrupt without processing it.
>
> This patch was actually a first attempt to fix missing device insertions
> as described in (usb: dwc2: host: Fix missing device insertions) and it
> did solve some of the signal bouncing problems but not all of
> them (which is why I submitted the other patch).  Specifically, this
> patch itself would sometimes change:
>  1. hardware sees connect
>  2. hardware sees disconnect
>  3. hardware sees connect
>  4. dwc2_port_intr() - clears connect interrupt
>  5. dwc2_handle_common_intr() - calls dwc2_hcd_disconnect()
>
> ...to:
>  1. hardware sees connect
>  2. hardware sees disconnect
>  3. dwc2_port_intr() - clears connect interrupt
>  4. hardware sees connect
>  5. dwc2_handle_common_intr() - calls dwc2_hcd_disconnect()
>
> ...but with different timing then sometimes we'd still miss cable
> insertions.
>
> In any case, though this patch doesn't fix any (known) problems, it
> still seems wise as a general policy to clear interrupt before handling
> them.
>
> Note that for dwc2_handle_usb_port_intr(), instead of moving the clear
> of PRTINT to the beginning of the function we remove it completely.  The
> only way to clear PRTINT is to clear the sources that set it in the
> first place.
>
> Signed-off-by: Douglas Anderson <dianders@...omium.org>
> Acked-by: John Youn <johnyoun@...opsys.com>
> Tested-by: John Youn <johnyoun@...opsys.com>

$ patch -p1 --dry-run < patch.diff
checking file drivers/usb/dwc2/core_intr.c
checking file drivers/usb/dwc2/hcd_intr.c
Hunk #4 FAILED at 365.
Hunk #5 succeeded at 388 (offset 11 lines).
1 out of 5 hunks FAILED

Care to rebase on top of my testing/next ?

-- 
balbi

Download attachment "signature.asc" of type "application/pgp-signature" (819 bytes)