| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1447985406-44776-1-git-send-email-puck.chen@hisilicon.com>
Date: Fri, 20 Nov 2015 10:10:04 +0800
From: Chen Feng <puck.chen@...ilicon.com>
To: <puck.chen@...ilicon.com>, <p.zabel@...gutronix.de>,
<robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<xuwei5@...ilicon.com>
CC: <puck.chen@...yun.com>, <w.f@...wei.com>
Subject: [PATCH V7 1/3] reset: hisilicon: document hisi-hi6220 reset controllers bindings
Add DT bindings documentation for hi6220 SoC reset controller.
Signed-off-by: Chen Feng <puck.chen@...ilicon.com>
---
.../bindings/reset/hisilicon,hi6220-reset.txt | 34 +++++++++++
include/dt-bindings/reset/hisi,hi6220-resets.h | 67 ++++++++++++++++++++++
2 files changed, 101 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
create mode 100644 include/dt-bindings/reset/hisi,hi6220-resets.h
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
new file mode 100644
index 0000000..e0b185a
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
@@ -0,0 +1,34 @@
+Hisilicon System Reset Controller
+======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+The reset controller registers are part of the system-ctl block on
+hi6220 SoC.
+
+Required properties:
+- compatible: may be "hisilicon,hi6220-sysctrl"
+- reg: should be register base and length as documented in the
+ datasheet
+- #reset-cells: 1, see below
+
+Example:
+sys_ctrl: sys_ctrl@...30000 {
+ compatible = "hisilicon,hi6220-sysctrl", "syscon";
+ reg = <0x0 0xf7030000 0x0 0x2000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+example:
+
+ uart1: serial@..... {
+ ...
+ resets = <&sys_ctrl PERIPH_RSTEN3_UART1>;
+ ...
+ };
+
+The index could be found in <dt-bindings/reset/hisi,hi6220-resets.h>.
diff --git a/include/dt-bindings/reset/hisi,hi6220-resets.h b/include/dt-bindings/reset/hisi,hi6220-resets.h
new file mode 100644
index 0000000..ca08a7e
--- /dev/null
+++ b/include/dt-bindings/reset/hisi,hi6220-resets.h
@@ -0,0 +1,67 @@
+/**
+ * This header provides index for the reset controller
+ * based on hi6220 SoC.
+ */
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_HI6220
+#define _DT_BINDINGS_RESET_CONTROLLER_HI6220
+
+#define PERIPH_RSTDIS0_MMC0 0x000
+#define PERIPH_RSTDIS0_MMC1 0x001
+#define PERIPH_RSTDIS0_MMC2 0x002
+#define PERIPH_RSTDIS0_NANDC 0x003
+#define PERIPH_RSTDIS0_USBOTG_BUS 0x004
+#define PERIPH_RSTDIS0_POR_PICOPHY 0x005
+#define PERIPH_RSTDIS0_USBOTG 0x006
+#define PERIPH_RSTDIS0_USBOTG_32K 0x007
+#define PERIPH_RSTDIS1_HIFI 0x100
+#define PERIPH_RSTDIS1_DIGACODEC 0x105
+#define PERIPH_RSTEN2_IPF 0x200
+#define PERIPH_RSTEN2_SOCP 0x201
+#define PERIPH_RSTEN2_DMAC 0x202
+#define PERIPH_RSTEN2_SECENG 0x203
+#define PERIPH_RSTEN2_ABB 0x204
+#define PERIPH_RSTEN2_HPM0 0x205
+#define PERIPH_RSTEN2_HPM1 0x206
+#define PERIPH_RSTEN2_HPM2 0x207
+#define PERIPH_RSTEN2_HPM3 0x208
+#define PERIPH_RSTEN3_CSSYS 0x300
+#define PERIPH_RSTEN3_I2C0 0x301
+#define PERIPH_RSTEN3_I2C1 0x302
+#define PERIPH_RSTEN3_I2C2 0x303
+#define PERIPH_RSTEN3_I2C3 0x304
+#define PERIPH_RSTEN3_UART1 0x305
+#define PERIPH_RSTEN3_UART2 0x306
+#define PERIPH_RSTEN3_UART3 0x307
+#define PERIPH_RSTEN3_UART4 0x308
+#define PERIPH_RSTEN3_SSP 0x309
+#define PERIPH_RSTEN3_PWM 0x30a
+#define PERIPH_RSTEN3_BLPWM 0x30b
+#define PERIPH_RSTEN3_TSENSOR 0x30c
+#define PERIPH_RSTEN3_DAPB 0x312
+#define PERIPH_RSTEN3_HKADC 0x313
+#define PERIPH_RSTEN3_CODEC_SSI 0x314
+#define PERIPH_RSTEN3_PMUSSI1 0x316
+#define PERIPH_RSTEN8_RS0 0x400
+#define PERIPH_RSTEN8_RS2 0x401
+#define PERIPH_RSTEN8_RS3 0x402
+#define PERIPH_RSTEN8_MS0 0x403
+#define PERIPH_RSTEN8_MS2 0x405
+#define PERIPH_RSTEN8_XG2RAM0 0x406
+#define PERIPH_RSTEN8_X2SRAM_TZMA 0x407
+#define PERIPH_RSTEN8_SRAM 0x408
+#define PERIPH_RSTEN8_HARQ 0x40a
+#define PERIPH_RSTEN8_DDRC 0x40c
+#define PERIPH_RSTEN8_DDRC_APB 0x40d
+#define PERIPH_RSTEN8_DDRPACK_APB 0x40e
+#define PERIPH_RSTEN8_DDRT 0x411
+#define PERIPH_RSDIST9_CARM_DAP 0x500
+#define PERIPH_RSDIST9_CARM_ATB 0x501
+#define PERIPH_RSDIST9_CARM_LBUS 0x502
+#define PERIPH_RSDIST9_CARM_POR 0x503
+#define PERIPH_RSDIST9_CARM_CORE 0x504
+#define PERIPH_RSDIST9_CARM_DBG 0x505
+#define PERIPH_RSDIST9_CARM_L2 0x506
+#define PERIPH_RSDIST9_CARM_SOCDBG 0x507
+#define PERIPH_RSDIST9_CARM_ETM 0x508
+
+#endif /*_DT_BINDINGS_RESET_CONTROLLER_HI6220*/
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists