linux-kernel - [PATCH v2] clk: si5351: Add PLL soft reset

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1448040137-21400-2-git-send-email-jacob@teenage.engineering>
Date:	Fri, 20 Nov 2015 18:22:17 +0100
From:	Jacob Siverskog <jacob@...nage.engineering>
To:	Michael Turquette <mturquette@...libre.com>,
	Stephen Boyd <sboyd@...eaurora.org>,
	Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
	linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org
Cc:	Belisko Marek <marek.belisko@...il.com>,
	Jacob Siverskog <jacob@...nage.engineering>,
	Jens Rudberg <jens@...nage.engineering>
Subject: [PATCH v2] clk: si5351: Add PLL soft reset

This is according to figure 12 ("I2C Programming Procedure") in
"Si5351A/B/C Data Sheet"
(https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351-B.pdf).

Without the PLL soft reset, we were unable to get three outputs
working at the same time.

According to Silicon Labs support, performing PLL soft reset will only
be noticeable if the PLL parameters have been changed.

Signed-off-by: Jacob Siverskog <jacob@...nage.engineering>
Signed-off-by: Jens Rudberg <jens@...nage.engineering>
---
 drivers/clk/clk-si5351.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c
index e346b22..984c058 100644
--- a/drivers/clk/clk-si5351.c
+++ b/drivers/clk/clk-si5351.c
@@ -1091,6 +1091,12 @@ static int si5351_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
 	si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
 			SI5351_CLK_POWERDOWN, 0);
 
+	/* do a pll soft reset on both plls, needed in some cases to get all
+	 * outputs running
+	 */
+	si5351_reg_write(hwdata->drvdata, SI5351_PLL_RESET,
+			 SI5351_PLL_RESET_A | SI5351_PLL_RESET_B);
+
 	dev_dbg(&hwdata->drvdata->client->dev,
 		"%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n",
 		__func__, clk_hw_get_name(hw), (1 << rdiv),
-- 
2.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/