Message-ID: <1448042245-25702-1-git-send-email-yrdreddy@broadcom.com>
Date:	Fri, 20 Nov 2015 12:57:25 -0500
From:	Yendapally Reddy Dhananjaya Reddy <yrdreddy@...adcom.com>
To:	Linus Walleij <linus.walleij@...aro.org>,
	Ray Jui <rjui@...adcom.com>,
	Scott Branden <sbranden@...adcom.com>,
	Jon Mason <jonmason@...adcom.com>
CC:	<linux-kernel@...r.kernel.org>, <linux-gpio@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	<bcm-kernel-feedback-list@...adcom.com>,
	Yendapally Reddy Dhananjaya Reddy <yrdreddy@...adcom.com>
Subject: [PATCH 2/3] pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC

This adds the initial support of the Broadcom NSP pinmux driver.

Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yrdreddy@...adcom.com>
---
 drivers/pinctrl/bcm/Kconfig           |  13 +
 drivers/pinctrl/bcm/Makefile          |   1 +
 drivers/pinctrl/bcm/pinctrl-nsp-mux.c | 650 ++++++++++++++++++++++++++++++++++
 3 files changed, 664 insertions(+)
 create mode 100644 drivers/pinctrl/bcm/pinctrl-nsp-mux.c

diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index cd11d4d..9e961d9 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -54,3 +54,16 @@ config PINCTRL_CYGNUS_MUX
 	  The Broadcom Cygnus IOMUX driver supports group based IOMUX
 	  configuration, with the exception that certain individual pins
 	  can be overrided to GPIO function
+
+config PINCTRL_NSP_MUX
+	bool "Broadcom NSP IOMUX driver"
+	depends on (ARCH_BCM_NSP || COMPILE_TEST)
+	select PINMUX
+	select GENERIC_PINCONF
+	default ARCH_BCM_NSP
+	help
+	  Say yes here to enable the Broadcom NSP SOC IOMUX driver.
+
+	  The Broadcom Northstar Plus IOMUX driver supports pin based IOMUX
+	  configuration, with certain individual pins can be overridden
+	  to GPIO function.
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index 2b2f70e..1effa44 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_PINCTRL_BCM281XX)		+= pinctrl-bcm281xx.o
 obj-$(CONFIG_PINCTRL_BCM2835)		+= pinctrl-bcm2835.o
 obj-$(CONFIG_PINCTRL_CYGNUS_GPIO)	+= pinctrl-cygnus-gpio.o
 obj-$(CONFIG_PINCTRL_CYGNUS_MUX)	+= pinctrl-cygnus-mux.o
+obj-$(CONFIG_PINCTRL_NSP_MUX)		+= pinctrl-nsp-mux.o
diff --git a/drivers/pinctrl/bcm/pinctrl-nsp-mux.c b/drivers/pinctrl/bcm/pinctrl-nsp-mux.c
new file mode 100644
index 0000000..9b9afe0
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-nsp-mux.c
@@ -0,0 +1,650 @@
+/* Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This file contains the Northstar plus (NSP) IOMUX driver that supports
+ * group based PINMUX configuration. The Northstar plus IOMUX controller
+ * allows pins to be individually muxed to GPIO function. The NAND and MMC is
+ * a group based selection. The gpio_a 8 - 11 are muxed with gpio_b and pwm.
+ * To select PWM, one need to enable the corresponding gpio_b as well.
+ *
+ *				gpio_a (8 - 11)
+ *				+----------
+ *				|
+ *		gpio_a (8-11)	|	gpio_b (0 - 3)
+ *	------------------------+-------+----------
+ *					|
+ *					|	pwm (0 - 3)
+ *					+----------
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "../core.h"
+#include "../pinctrl-utils.h"
+
+#define NSP_MUX_BASE0	0x00
+#define NSP_MUX_BASE1	0x01
+#define NSP_MUX_BASE2	0x02
+/*
+ * nsp IOMUX register description
+ *
+ * @base: base 0 or base 1
+ * @shift: bit shift for mux configuration of a group
+ * @mask: bit mask of the function
+ * @alt: alternate function to set to
+ */
+struct nsp_mux {
+	unsigned int base;
+	unsigned int shift;
+	unsigned int mask;
+	unsigned int alt;
+};
+
+/*
+ * Keep track of nsp IOMUX configuration and prevent double configuration
+ *
+ * @nsp_mux: nsp IOMUX register description
+ * @is_configured: flag to indicate whether a mux setting has already been
+ * configured
+ */
+struct nsp_mux_log {
+	struct nsp_mux mux;
+	bool is_configured;
+};
+
+/*
+ * Group based IOMUX configuration
+ *
+ * @name: name of the group
+ * @pins: array of pins used by this group
+ * @num_pins: total number of pins used by this group
+ * @mux: nsp group based IOMUX configuration
+ */
+struct nsp_pin_group {
+	const char *name;
+	const unsigned *pins;
+	const unsigned num_pins;
+	const struct nsp_mux mux;
+};
+
+/*
+ * nsp mux function and supported pin groups
+ *
+ * @name: name of the function
+ * @groups: array of groups that can be supported by this function
+ * @num_groups: total number of groups that can be supported by this function
+ */
+struct nsp_pin_function {
+	const char *name;
+	const char * const *groups;
+	const unsigned num_groups;
+};
+
+/*
+ * nsp IOMUX pinctrl core
+ *
+ * @pctl: pointer to pinctrl_dev
+ * @dev: pointer to device
+ * @base0: first mux register
+ * @base1: second mux register
+ * @base2: third mux register
+ * @groups: pointer to array of groups
+ * @num_groups: total number of groups
+ * @functions: pointer to array of functions
+ * @num_functions: total number of functions
+ * @mux_log: pointer to the array of mux logs
+ * @lock: lock to protect register access
+ */
+struct nsp_pinctrl {
+	struct pinctrl_dev *pctl;
+	struct device *dev;
+	void __iomem *base0;
+	void __iomem *base1;
+	void __iomem *base2;
+	const struct nsp_pin_group *groups;
+	unsigned num_groups;
+	const struct nsp_pin_function *functions;
+	unsigned num_functions;
+	struct nsp_mux_log *mux_log;
+	spinlock_t lock;
+};
+
+/*
+ * Description of a pin in nsp
+ *
+ * @pin: pin number
+ * @name: pin name
+ * @gpio_select: reg data to select GPIO
+ */
+struct nsp_pin {
+	unsigned pin;
+	char *name;
+	unsigned int gpio_select;
+};
+
+#define NSP_PIN_DESC(p, n, g)		\
+{					\
+	.pin = p,			\
+	.name = n,			\
+	.gpio_select = g,		\
+}
+
+/*
+ * List of muxable pins in nsp
+ */
+static struct nsp_pin nsp_pins[] = {
+	NSP_PIN_DESC(0, "spi_clk", 1),
+	NSP_PIN_DESC(1, "spi_ss", 1),
+	NSP_PIN_DESC(2, "spi_mosi", 1),
+	NSP_PIN_DESC(3, "spi_miso", 1),
+	NSP_PIN_DESC(4, "scl", 1),
+	NSP_PIN_DESC(5, "sda", 1),
+	NSP_PIN_DESC(6, "mdc", 1),
+	NSP_PIN_DESC(7, "mdio", 1),
+	NSP_PIN_DESC(8, "pwm0", 1),
+	NSP_PIN_DESC(9, "pwm1", 1),
+	NSP_PIN_DESC(10, "pwm2", 1),
+	NSP_PIN_DESC(11, "pwm3", 1),
+	NSP_PIN_DESC(12, "uart1_rx", 1),
+	NSP_PIN_DESC(13, "uart1_tx", 1),
+	NSP_PIN_DESC(14, "uart1_cts", 1),
+	NSP_PIN_DESC(15, "uart1_rts", 1),
+	NSP_PIN_DESC(16, "uart2_rx", 1),
+	NSP_PIN_DESC(17, "uart2_tx", 1),
+	NSP_PIN_DESC(18, "synce", 0),
+	NSP_PIN_DESC(19, "sata0_led", 0),
+	NSP_PIN_DESC(20, "sata1_led", 0),
+	NSP_PIN_DESC(21, "xtal_out", 1),
+	NSP_PIN_DESC(22, "sdio_pwr", 1),
+	NSP_PIN_DESC(23, "sdio_en_1p8v", 1),
+	NSP_PIN_DESC(24, "gpio_24", 1),
+	NSP_PIN_DESC(25, "gpio_25", 1),
+	NSP_PIN_DESC(26, "p5_led0", 0),
+	NSP_PIN_DESC(27, "p5_led1", 0),
+	NSP_PIN_DESC(28, "gpio_28", 1),
+	NSP_PIN_DESC(29, "gpio_29", 1),
+	NSP_PIN_DESC(30, "gpio_30", 1),
+	NSP_PIN_DESC(31, "gpio_31", 1),
+	NSP_PIN_DESC(32, "nand_ale", 0),
+	NSP_PIN_DESC(33, "nand_ce0", 0),
+	NSP_PIN_DESC(34, "nand_r/b", 0),
+	NSP_PIN_DESC(35, "nand_dq0", 0),
+	NSP_PIN_DESC(36, "nand_dq1", 0),
+	NSP_PIN_DESC(37, "nand_dq2", 0),
+	NSP_PIN_DESC(38, "nand_dq3", 0),
+	NSP_PIN_DESC(39, "nand_dq4", 0),
+	NSP_PIN_DESC(40, "nand_dq5", 0),
+	NSP_PIN_DESC(41, "nand_dq6", 0),
+	NSP_PIN_DESC(42, "nand_dq7", 0),
+};
+
+/*
+ * List of groups of pins
+ */
+
+static const unsigned spi_pins[] = {0, 1, 2, 3};
+static const unsigned i2c_pins[] = {4, 5};
+static const unsigned mdio_pins[] = {6, 7};
+static const unsigned pwm0_pins[] = {8};
+static const unsigned gpio_b_0_pins[] = {8};
+static const unsigned pwm1_pins[] = {9};
+static const unsigned gpio_b_1_pins[] = {9};
+static const unsigned pwm2_pins[] = {10};
+static const unsigned gpio_b_2_pins[] = {10};
+static const unsigned pwm3_pins[] = {11};
+static const unsigned gpio_b_3_pins[] = {11};
+static const unsigned uart1_pins[] = {12, 13, 14, 15};
+static const unsigned uart2_pins[] = {16, 17};
+static const unsigned synce_pins[] = {18};
+static const unsigned sata0_led_pins[] = {19};
+static const unsigned sata1_led_pins[] = {20};
+static const unsigned xtal_out_pins[] = {21};
+static const unsigned sdio_pwr_pins[] = {22};
+static const unsigned sdio_1p8v_pins[] = {23};
+static const unsigned switch_p05_led0_pins[] = {26};
+static const unsigned switch_p05_led1_pins[] = {27};
+static const unsigned nand_pins[] = {32, 33, 34, 35, 36, 37, 38, 39,
+							40, 41, 42};
+static const unsigned emmc_pins[] = {32, 33, 34, 35, 36, 37, 38, 39,
+							40, 41, 42};
+
+#define NSP_PIN_GROUP(group_name, ba, sh, ma, al)	\
+{							\
+	.name = __stringify(group_name) "_grp",		\
+	.pins = group_name ## _pins,			\
+	.num_pins = ARRAY_SIZE(group_name ## _pins),	\
+	.mux = {					\
+		.base = ba,				\
+		.shift = sh,				\
+		.mask = ma,				\
+		.alt = al,				\
+	}						\
+}
+
+/*
+ * List of nsp pin groups
+ */
+static const struct nsp_pin_group nsp_pin_groups[] = {
+	NSP_PIN_GROUP(spi, NSP_MUX_BASE0, 0, 0x0f, 0x00),
+	NSP_PIN_GROUP(i2c, NSP_MUX_BASE0, 3, 0x03, 0x00),
+	NSP_PIN_GROUP(mdio, NSP_MUX_BASE0, 5, 0x03, 0x00),
+	NSP_PIN_GROUP(gpio_b_0, NSP_MUX_BASE0, 7, 0x01, 0x00),
+	NSP_PIN_GROUP(pwm0, NSP_MUX_BASE1, 0, 0x01, 0x01),
+	NSP_PIN_GROUP(gpio_b_1, NSP_MUX_BASE0, 8, 0x01, 0x00),
+	NSP_PIN_GROUP(pwm1, NSP_MUX_BASE1, 1, 0x01, 0x01),
+	NSP_PIN_GROUP(gpio_b_2, NSP_MUX_BASE0, 9, 0x01, 0x00),
+	NSP_PIN_GROUP(pwm2, NSP_MUX_BASE1, 2, 0x01, 0x01),
+	NSP_PIN_GROUP(gpio_b_3, NSP_MUX_BASE0, 10, 0x01, 0x00),
+	NSP_PIN_GROUP(pwm3, NSP_MUX_BASE1, 3, 0x01, 0x01),
+	NSP_PIN_GROUP(uart1, NSP_MUX_BASE0, 11, 0x0f, 0x00),
+	NSP_PIN_GROUP(uart2, NSP_MUX_BASE0, 15, 0x03, 0x00),
+	NSP_PIN_GROUP(synce, NSP_MUX_BASE0, 17, 0x01, 0x01),
+	NSP_PIN_GROUP(sata0_led, NSP_MUX_BASE0, 18, 0x01, 0x01),
+	NSP_PIN_GROUP(sata1_led, NSP_MUX_BASE0, 19, 0x01, 0x01),
+	NSP_PIN_GROUP(xtal_out, NSP_MUX_BASE0, 20, 0x01, 0x00),
+	NSP_PIN_GROUP(sdio_pwr, NSP_MUX_BASE0, 21, 0x01, 0x00),
+	NSP_PIN_GROUP(sdio_1p8v, NSP_MUX_BASE0, 22, 0x01, 0x00),
+	NSP_PIN_GROUP(switch_p05_led0, NSP_MUX_BASE0, 26, 0x01, 0x01),
+	NSP_PIN_GROUP(switch_p05_led1, NSP_MUX_BASE0, 27, 0x01, 0x01),
+	NSP_PIN_GROUP(nand, NSP_MUX_BASE2, 0, 0x01, 0x00),
+	NSP_PIN_GROUP(emmc, NSP_MUX_BASE2, 0, 0x01, 0x01)
+};
+
+/*
+ * List of groups supported by functions
+ */
+
+static const char * const spi_grps[] = {"spi_grp"};
+static const char * const i2c_grps[] = {"i2c_grp"};
+static const char * const mdio_grps[] = {"mdio_grp"};
+static const char * const pwm_grps[] = {"pwm0_grp", "pwm1_grp", "pwm2_grp"
+						, "pwm3_grp"};
+static const char * const gpio_b_grps[] = {"gpio_b_0_grp", "gpio_b_1_grp",
+					"gpio_b_2_grp", "gpio_b_3_grp"};
+static const char * const uart1_grps[] = {"uart1_grp"};
+static const char * const uart2_grps[] = {"uart2_grp"};
+static const char * const synce_grps[] = {"synce_grp"};
+static const char * const sata_led_grps[] = {"sata0_led_grp", "sata1_led_grp"};
+static const char * const xtal_out_grps[] = {"xtal_out_grp"};
+static const char * const sdio_grps[] = {"sdio_pwr_grp", "sdio_1p8v_grp"};
+static const char * const switch_led_grps[] = {"switch_p05_led0_grp",
+						"switch_p05_led1_grp"};
+static const char * const nand_grps[] = {"nand_grp"};
+static const char * const emmc_grps[] = {"emmc_grp"};
+
+#define NSP_PIN_FUNCTION(func)				\
+{							\
+	.name = #func,					\
+	.groups = func ## _grps,			\
+	.num_groups = ARRAY_SIZE(func ## _grps),	\
+}
+
+/*
+ * List of supported functions in nsp
+ */
+static const struct nsp_pin_function nsp_pin_functions[] = {
+	NSP_PIN_FUNCTION(spi),
+	NSP_PIN_FUNCTION(i2c),
+	NSP_PIN_FUNCTION(mdio),
+	NSP_PIN_FUNCTION(pwm),
+	NSP_PIN_FUNCTION(gpio_b),
+	NSP_PIN_FUNCTION(uart1),
+	NSP_PIN_FUNCTION(uart2),
+	NSP_PIN_FUNCTION(synce),
+	NSP_PIN_FUNCTION(sata_led),
+	NSP_PIN_FUNCTION(xtal_out),
+	NSP_PIN_FUNCTION(sdio),
+	NSP_PIN_FUNCTION(switch_led),
+	NSP_PIN_FUNCTION(nand),
+	NSP_PIN_FUNCTION(emmc)
+};
+
+static int nsp_get_groups_count(struct pinctrl_dev *pctrl_dev)
+{
+	struct nsp_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->num_groups;
+}
+
+static const char *nsp_get_group_name(struct pinctrl_dev *pctrl_dev,
+				      unsigned selector)
+{
+	struct nsp_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->groups[selector].name;
+}
+
+static int nsp_get_group_pins(struct pinctrl_dev *pctrl_dev,
+			      unsigned selector, const unsigned **pins,
+			      unsigned *num_pins)
+{
+	struct nsp_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	*pins = pinctrl->groups[selector].pins;
+	*num_pins = pinctrl->groups[selector].num_pins;
+
+	return 0;
+}
+
+static void nsp_pin_dbg_show(struct pinctrl_dev *pctrl_dev,
+			     struct seq_file *s, unsigned offset)
+{
+	seq_printf(s, " %s", dev_name(pctrl_dev->dev));
+}
+
+static struct pinctrl_ops nsp_pinctrl_ops = {
+	.get_groups_count = nsp_get_groups_count,
+	.get_group_name = nsp_get_group_name,
+	.get_group_pins = nsp_get_group_pins,
+	.pin_dbg_show = nsp_pin_dbg_show,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
+	.dt_free_map = pinctrl_utils_dt_free_map,
+};
+
+static int nsp_get_functions_count(struct pinctrl_dev *pctrl_dev)
+{
+	struct nsp_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->num_functions;
+}
+
+static const char *nsp_get_function_name(struct pinctrl_dev *pctrl_dev,
+					 unsigned selector)
+{
+	struct nsp_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->functions[selector].name;
+}
+
+static int nsp_get_function_groups(struct pinctrl_dev *pctrl_dev,
+				   unsigned selector,
+				   const char * const **groups,
+				   unsigned * const num_groups)
+{
+	struct nsp_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	*groups = pinctrl->functions[selector].groups;
+	*num_groups = pinctrl->functions[selector].num_groups;
+
+	return 0;
+}
+
+static int nsp_pinmux_set(struct nsp_pinctrl *pinctrl,
+			  const struct nsp_pin_function *func,
+			  const struct nsp_pin_group *grp,
+			  struct nsp_mux_log *mux_log)
+{
+	const struct nsp_mux *mux = &grp->mux;
+	int i;
+	u32 val, mask;
+	unsigned long flags;
+	void __iomem *base_address;
+
+	for (i = 0; i < pinctrl->num_groups; i++) {
+		if ((mux->shift != mux_log[i].mux.shift) ||
+			(mux->base != mux_log[i].mux.base))
+			continue;
+
+		/* if this is a new configuration, just do it! */
+		if (!mux_log[i].is_configured)
+			break;
+
+		/*
+		 * IOMUX has been configured previously and one is trying to
+		 * configure it to a different function
+		 */
+		if (mux_log[i].mux.alt != mux->alt) {
+			dev_err(pinctrl->dev,
+				"double configuration error detected!\n");
+			dev_err(pinctrl->dev, "func:%s grp:%s\n",
+				func->name, grp->name);
+			return -EINVAL;
+		}
+
+		return 0;
+	}
+	if (i == pinctrl->num_groups)
+		return -EINVAL;
+
+	mask = mux->mask;
+	mux_log[i].mux.alt = mux->alt;
+	mux_log[i].is_configured = true;
+
+	switch (mux->base) {
+	case NSP_MUX_BASE0:
+		base_address = pinctrl->base0;
+		break;
+
+	case NSP_MUX_BASE1:
+		base_address = pinctrl->base1;
+		break;
+
+	case NSP_MUX_BASE2:
+		base_address = pinctrl->base2;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(base_address);
+	val &= ~(mask << grp->mux.shift);
+	val |= grp->mux.alt << grp->mux.shift;
+	writel(val, base_address);
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	return 0;
+}
+
+static int nsp_pinmux_enable(struct pinctrl_dev *pctrl_dev,
+			     unsigned func_select, unsigned grp_select)
+{
+	struct nsp_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+	const struct nsp_pin_function *func;
+	const struct nsp_pin_group *grp;
+
+	if (grp_select > pinctrl->num_groups ||
+		func_select > pinctrl->num_functions)
+		return -EINVAL;
+
+	func = &pinctrl->functions[func_select];
+	grp = &pinctrl->groups[grp_select];
+
+	dev_dbg(pctrl_dev->dev, "func:%u name:%s grp:%u name:%s\n",
+		func_select, func->name, grp_select, grp->name);
+
+	dev_dbg(pctrl_dev->dev, "shift:%u alt:%u\n", grp->mux.shift,
+		grp->mux.alt);
+
+	return nsp_pinmux_set(pinctrl, func, grp, pinctrl->mux_log);
+}
+
+
+static int nsp_gpio_request_enable(struct pinctrl_dev *pctrl_dev,
+				   struct pinctrl_gpio_range *range,
+				   unsigned pin)
+{
+	struct nsp_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+	u32 *gpio_select = pctrl_dev->desc->pins[pin].drv_data;
+	u32 val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(pinctrl->base0);
+	if ((val & BIT(pin)) != (*gpio_select << pin)) {
+		val &= ~BIT(pin);
+		val |= *gpio_select << pin;
+		writel(val, pinctrl->base0);
+	}
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	return 0;
+}
+
+static void nsp_gpio_disable_free(struct pinctrl_dev *pctrl_dev,
+				  struct pinctrl_gpio_range *range,
+				  unsigned pin)
+{
+	struct nsp_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+	u32 *gpio_select = pctrl_dev->desc->pins[pin].drv_data;
+	u32 val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+	val = readl(pinctrl->base0);
+	if ((val & (1 << pin)) == (*gpio_select << pin)) {
+		val &= ~(1 << pin);
+		if (!(*gpio_select))
+			val |= (1 << pin);
+		writel(val, pinctrl->base0);
+	}
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+}
+
+static struct pinmux_ops nsp_pinmux_ops = {
+	.get_functions_count = nsp_get_functions_count,
+	.get_function_name = nsp_get_function_name,
+	.get_function_groups = nsp_get_function_groups,
+	.set_mux = nsp_pinmux_enable,
+	.gpio_request_enable = nsp_gpio_request_enable,
+	.gpio_disable_free = nsp_gpio_disable_free,
+};
+
+static struct pinctrl_desc nsp_pinctrl_desc = {
+	.name = "nsp-pinmux",
+	.pctlops = &nsp_pinctrl_ops,
+	.pmxops = &nsp_pinmux_ops,
+};
+
+static int nsp_mux_log_init(struct nsp_pinctrl *pinctrl)
+{
+	struct nsp_mux_log *log;
+	unsigned int i;
+	u32 no_of_groups = ARRAY_SIZE(nsp_pin_groups);
+
+	pinctrl->mux_log = devm_kcalloc(pinctrl->dev, no_of_groups,
+					sizeof(struct nsp_mux_log),
+					GFP_KERNEL);
+	if (!pinctrl->mux_log)
+		return -ENOMEM;
+
+	for (i = 0; i < no_of_groups; i++) {
+		log = &pinctrl->mux_log[i];
+		log->mux.base = nsp_pin_groups[i].mux.base;
+		log->mux.shift = nsp_pin_groups[i].mux.shift;
+		log->mux.alt = 0;
+		log->is_configured = false;
+	}
+
+	return 0;
+}
+
+static int nsp_pinmux_probe(struct platform_device *pdev)
+{
+	struct nsp_pinctrl *pinctrl;
+	struct resource *res;
+	int i, ret;
+	struct pinctrl_pin_desc *pins;
+	unsigned num_pins = ARRAY_SIZE(nsp_pins);
+
+	pinctrl = devm_kzalloc(&pdev->dev, sizeof(*pinctrl), GFP_KERNEL);
+	if (!pinctrl)
+		return -ENOMEM;
+	pinctrl->dev = &pdev->dev;
+	platform_set_drvdata(pdev, pinctrl);
+	spin_lock_init(&pinctrl->lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pinctrl->base0 = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pinctrl->base0)) {
+		dev_err(&pdev->dev, "unable to map I/O space\n");
+		return PTR_ERR(pinctrl->base0);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	pinctrl->base1 = devm_ioremap_nocache(&pdev->dev, res->start,
+					      resource_size(res));
+	if (!pinctrl->base1) {
+		dev_err(&pdev->dev, "unable to map I/O space\n");
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	pinctrl->base2 = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pinctrl->base2)) {
+		dev_err(&pdev->dev, "unable to map I/O space\n");
+		return PTR_ERR(pinctrl->base2);
+	}
+
+	ret = nsp_mux_log_init(pinctrl);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to initialize IOMUX log\n");
+		return ret;
+	}
+
+	pins = devm_kcalloc(&pdev->dev, num_pins, sizeof(*pins), GFP_KERNEL);
+	if (!pins)
+		return -ENOMEM;
+
+	for (i = 0; i < num_pins; i++) {
+		pins[i].number = nsp_pins[i].pin;
+		pins[i].name = nsp_pins[i].name;
+		pins[i].drv_data = &nsp_pins[i].gpio_select;
+	}
+
+	pinctrl->groups = nsp_pin_groups;
+	pinctrl->num_groups = ARRAY_SIZE(nsp_pin_groups);
+	pinctrl->functions = nsp_pin_functions;
+	pinctrl->num_functions = ARRAY_SIZE(nsp_pin_functions);
+	nsp_pinctrl_desc.pins = pins;
+	nsp_pinctrl_desc.npins = num_pins;
+
+	pinctrl->pctl = pinctrl_register(&nsp_pinctrl_desc, &pdev->dev,
+					 pinctrl);
+	if (IS_ERR(pinctrl->pctl)) {
+		dev_err(&pdev->dev, "unable to register nsp IOMUX pinctrl\n");
+		return PTR_ERR(pinctrl->pctl);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id nsp_pinmux_of_match[] = {
+	{ .compatible = "brcm,nsp-pinmux" },
+	{ }
+};
+
+static struct platform_driver nsp_pinmux_driver = {
+	.driver = {
+		.name = "nsp-pinmux",
+		.of_match_table = nsp_pinmux_of_match,
+	},
+	.probe = nsp_pinmux_probe,
+};
+
+static int __init nsp_pinmux_init(void)
+{
+	return platform_driver_register(&nsp_pinmux_driver);
+}
+arch_initcall(nsp_pinmux_init);
+
+MODULE_DESCRIPTION("Broadcom NSP IOMUX driver");
+MODULE_LICENSE("GPL v2");
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists