linux-kernel - Re: [PATCH] clk: qcom: Specify LE device endianness

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20151120211413.GA9555@codeaurora.org>
Date:	Fri, 20 Nov 2015 13:14:13 -0800
From:	Stephen Boyd <sboyd@...eaurora.org>
To:	Tyler Baker <tyler.baker@...aro.org>
Cc:	Mike Turquette <mturquette@...libre.com>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	linux-clk@...r.kernel.org, linux-arm-msm@...r.kernel.org,
	Simon Arlott <simon@...e.lp0.eu>,
	Mark Brown <broonie@...nel.org>
Subject: Re: [PATCH] clk: qcom: Specify LE device endianness

On 11/20, Tyler Baker wrote:
> On 9 November 2015 at 14:30, Stephen Boyd <sboyd@...eaurora.org> wrote:
> > All these clock controllers are little endian devices, but so far
> > we've been relying on the regmap mmio bus handling this for us
> > without explicitly stating that fact. After commit 4a98da2164cf
> > (regmap-mmio: Use native endianness for read/write, 2015-10-29),
> > the regmap mmio bus will read/write with the __raw_*() IO
> > accessors, instead of using the readl/writel() APIs that do
> > proper byte swapping for little endian devices.
> >
> > So if we're running on a big endian processor and haven't
> > specified the endianness explicitly in the regmap config or in
> > DT, we're going to switch from doing little endian byte swapping
> > to big endian accesses without byte swapping, leading to some
> > confusing results. On my apq8074 dragonboard, this causes the
> > device to fail to boot as we access the clock controller with
> > big endian IO accesses even though the device is little endian.
> >
> > Specify the endianness explicitly so that the regmap core
> > properly byte swaps the accesses for us.
> >
> > Reported-by: Kevin Hilman <khilman@...aro.org>
> > Cc: Simon Arlott <simon@...e.lp0.eu>
> > Cc: Mark Brown <broonie@...nel.org>
> > Signed-off-by: Stephen Boyd <sboyd@...eaurora.org>
> 
> Tested-by: Tyler Baker <tyler.baker@...aro.org>
> 
> The kernelci.org bot also reported boot failures[1] for the
> apq8016-sbc in next-20151120 with CONFIG_CPU_BIG_ENDIAN=y enabled.
> I've bisected the failure down to the same offending remap-mmio patch
> listed above. I've confirmed this patch applied on top of
> next-20151120 fixes the boot issue for the apq8016-sbc as well.
> 
> Any updates or comments on this patch? I'd like to see this fix in
> linux-next, as it has been broken for over a week and could be masking
> new issues.

Yeah I've been lagging on applying patches. I need to send more
patches for other regmap-mmio users too. I'll cook those up right
now and send them off.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/