[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <56508BD5.5050003@cogentembedded.com>
Date: Sat, 21 Nov 2015 18:20:53 +0300
From: Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
To: Joshua Henderson <joshua.henderson@...rochip.com>,
linux-kernel@...r.kernel.org
Cc: linux-mips@...ux-mips.org,
Andrei Pistirica <andrei.pistirica@...rochip.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>, devicetree@...r.kernel.org
Subject: Re: [PATCH 09/14] DEVICETREE: Add bindings for PIC32 usart driver
Hello.
On 11/21/2015 3:17 AM, Joshua Henderson wrote:
> From: Andrei Pistirica <andrei.pistirica@...rochip.com>
>
> Document the devicetree bindings for the USART peripheral found on
> Microchip PIC32 class devices.
>
> Signed-off-by: Andrei Pistirica <andrei.pistirica@...rochip.com>
> Signed-off-by: Joshua Henderson <joshua.henderson@...rochip.com>
> ---
> .../bindings/serial/microchip,pic32-usart.txt | 29 ++++++++++++++++++++
> 1 file changed, 29 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/serial/microchip,pic32-usart.txt
>
> diff --git a/Documentation/devicetree/bindings/serial/microchip,pic32-usart.txt b/Documentation/devicetree/bindings/serial/microchip,pic32-usart.txt
> new file mode 100644
> index 0000000..c87321c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/microchip,pic32-usart.txt
> @@ -0,0 +1,29 @@
> +* Microchip Universal Synchronous Asynchronous Receiver/Transmitter (USART)
> +
> +Required properties:
> +- compatible: Should be "microchip,pic32-usart"
> +- reg: Should contain registers location and length
> +- interrupts: Should contain interrupt
> +- pinctrl: Should contain pinctrl for TX/RX/RTS/CTS
No such prop in the example.
> +
> +Optional properties:
> +- microchip,uart-has-rtscts : Indicate the uart has hardware flow control
> +- rts-gpios: RTS pin for USP-based UART if microchip,uart-has-rtscts
> +- cts-gpios: CTS pin for USP-based UART if microchip,uart-has-rtscts
> +
> +Example:
> + usart0: serial@...22000 {
> + compatible = "microchip,pic32-usart";
> + reg = <0x1f822000 0x50>;
> + interrupts = <UART1_FAULT DEFAULT_INT_PRI IRQ_TYPE_NONE>,
> + <UART1_RECEIVE_DONE DEFAULT_INT_PRI IRQ_TYPE_NONE>,
> + <UART1_TRANSFER_DONE DEFAULT_INT_PRI IRQ_TYPE_NONE>;
> + pinctrl-names = "default";
> + pinctrl-0 = <
> + &pinctrl_uart1
> + &pinctrl_uart1_cts
> + &pinctrl_uart1_rts>;
The above 2 props are undocumented.
[...]
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists