Message-Id: <d769850108c56fbb811a9fd14542122a5464aef6.1448091735.git.baolin.wang@linaro.org>
Date:	Sat, 21 Nov 2015 15:44:53 +0800
From:	Baolin Wang <baolin.wang@...aro.org>
To:	balbi@...com, gregkh@...uxfoundation.org
Cc:	r.baldyga@...sung.com, fabio.estevam@...escale.com,
	Philip.Oberstaller@...tentrio.com, peter@...leysoftware.com,
	scottwood@...escale.com, broonie@...nel.org,
	baolin.wang@...aro.org, linux-usb@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v2] usb: gadget: Add the console support for usb-to-serial port

It dose not work when we want to use the usb-to-serial port based
on one usb gadget as a console. Thus this patch adds the console
initialization to support this request.

To avoid the re-entrance when transferring data with usb endpoint,
it introduces a kthread to do the IO transmission.

Signed-off-by: Baolin Wang <baolin.wang@...aro.org>
---
 drivers/usb/gadget/Kconfig             |    6 +
 drivers/usb/gadget/function/u_serial.c |  258 ++++++++++++++++++++++++++++++++
 2 files changed, 264 insertions(+)

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 33834aa..be5aab9 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -127,6 +127,12 @@ config USB_GADGET_STORAGE_NUM_BUFFERS
 	   a module parameter as well.
 	   If unsure, say 2.
 
+config U_SERIAL_CONSOLE
+	bool "Serial gadget console support"
+	depends on USB_G_SERIAL
+	help
+	   It supports the serial gadget can be used as a console.
+
 source "drivers/usb/gadget/udc/Kconfig"
 
 #
diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
index f7771d8..6af145f 100644
--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -27,6 +27,8 @@
 #include <linux/slab.h>
 #include <linux/export.h>
 #include <linux/module.h>
+#include <linux/console.h>
+#include <linux/kthread.h>
 
 #include "u_serial.h"
 
@@ -79,6 +81,7 @@
  */
 #define QUEUE_SIZE		16
 #define WRITE_BUF_SIZE		8192		/* TX only */
+#define GS_CONSOLE_BUF_SIZE	8192
 
 /* circular buffer */
 struct gs_buf {
@@ -88,6 +91,17 @@ struct gs_buf {
 	char			*buf_put;
 };
 
+/* console info */
+struct gscons_info {
+	struct gs_port		*port;
+	struct task_struct	*console_thread;
+	struct gs_buf		con_buf;
+	/* protect the buf and busy flag */
+	spinlock_t		con_lock;
+	int			req_busy;
+	struct usb_request	*console_req;
+};
+
 /*
  * The port structure holds info for each port, one for each minor number
  * (and thus for each /dev/ node).
@@ -1023,6 +1037,246 @@ static const struct tty_operations gs_tty_ops = {
 
 static struct tty_driver *gs_tty_driver;
 
+#ifdef CONFIG_U_SERIAL_CONSOLE
+
+static struct gscons_info gscons_info;
+static struct console gserial_cons;
+
+static struct usb_request *gs_request_new(struct usb_ep *ep)
+{
+	struct usb_request *req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+	if (!req)
+		return NULL;
+
+	req->buf = kmalloc(ep->maxpacket, GFP_ATOMIC);
+	if (!req->buf) {
+		usb_ep_free_request(ep, req);
+		return NULL;
+	}
+
+	return req;
+}
+
+static void gs_request_free(struct usb_request *req, struct usb_ep *ep)
+{
+	if (!req)
+		return;
+
+	kfree(req->buf);
+	usb_ep_free_request(ep, req);
+}
+
+static void gs_complete_out(struct usb_ep *ep, struct usb_request *req)
+{
+	struct gscons_info *info = &gscons_info;
+
+	switch (req->status) {
+	default:
+		pr_warn("%s: unexpected %s status %d\n",
+			__func__, ep->name, req->status);
+	case 0:
+		/* normal completion */
+		spin_lock(&info->con_lock);
+		info->req_busy = 0;
+		spin_unlock(&info->con_lock);
+
+		wake_up_process(info->console_thread);
+		break;
+	case -ESHUTDOWN:
+		/* disconnect */
+		pr_vdebug("%s: %s shutdown\n", __func__, ep->name);
+		break;
+	}
+}
+
+static int gs_console_connect(int port_num)
+{
+	struct gscons_info *info = &gscons_info;
+	struct gs_port *port;
+	struct usb_ep *ep;
+
+	if (port_num != gserial_cons.index) {
+		pr_err("%s: port num [%d] is not support console\n",
+		       __func__, port_num);
+		return -ENXIO;
+	}
+
+	port = ports[port_num].port;
+	ep = port->port_usb->in;
+	if (!info->console_req) {
+		info->console_req = gs_request_new(ep);
+		if (!info->console_req)
+			return -ENOMEM;
+		info->console_req->complete = gs_complete_out;
+	}
+
+	info->port = port;
+	spin_lock(&info->con_lock);
+	info->req_busy = 0;
+	spin_unlock(&info->con_lock);
+	pr_vdebug("port[%d] console connect!\n", port_num);
+	return 0;
+}
+
+static void gs_console_disconnect(struct usb_ep *ep)
+{
+	struct gscons_info *info = &gscons_info;
+	struct usb_request *req = info->console_req;
+
+	gs_request_free(req, ep);
+	info->console_req = NULL;
+}
+
+static int gs_console_thread(void *data)
+{
+	struct gscons_info *info = &gscons_info;
+	struct gs_port *port;
+	struct usb_request *req;
+	struct usb_ep *ep;
+	int xfer, ret, count, size;
+
+	do {
+		port = info->port;
+		set_current_state(TASK_INTERRUPTIBLE);
+		if (!port || !port->port_usb
+		    || !port->port_usb->in || !info->console_req)
+			goto sched;
+
+		req = info->console_req;
+		ep = port->port_usb->in;
+
+		spin_lock_irq(&info->con_lock);
+		count = gs_buf_data_avail(&info->con_buf);
+		size = ep->maxpacket;
+
+		if (count > 0 && !info->req_busy) {
+			set_current_state(TASK_RUNNING);
+			if (count < size)
+				size = count;
+
+			xfer = gs_buf_get(&info->con_buf, req->buf, size);
+			req->length = xfer;
+
+			spin_unlock(&info->con_lock);
+			ret = usb_ep_queue(ep, req, GFP_ATOMIC);
+			spin_lock(&info->con_lock);
+			if (ret < 0)
+				info->req_busy = 0;
+			else
+				info->req_busy = 1;
+
+			spin_unlock_irq(&info->con_lock);
+		} else {
+			spin_unlock_irq(&info->con_lock);
+sched:
+			if (kthread_should_stop()) {
+				set_current_state(TASK_RUNNING);
+				break;
+			}
+			schedule();
+		}
+	} while (1);
+
+	return 0;
+}
+
+static int gs_console_setup(struct console *co, char *options)
+{
+	struct gscons_info *info = &gscons_info;
+	int status;
+
+	info->port = NULL;
+	info->console_req = NULL;
+	info->req_busy = 0;
+	spin_lock_init(&info->con_lock);
+
+	status = gs_buf_alloc(&info->con_buf, GS_CONSOLE_BUF_SIZE);
+	if (status) {
+		pr_err("%s: allocate console buffer failed\n", __func__);
+		return status;
+	}
+
+	info->console_thread = kthread_create(gs_console_thread,
+					      co, "gs_console");
+	if (IS_ERR(info->console_thread)) {
+		pr_err("%s: cannot create console thread\n", __func__);
+		gs_buf_free(&info->con_buf);
+		return PTR_ERR(info->console_thread);
+	}
+	wake_up_process(info->console_thread);
+
+	return 0;
+}
+
+static void gs_console_write(struct console *co,
+			     const char *buf, unsigned count)
+{
+	struct gscons_info *info = &gscons_info;
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->con_lock, flags);
+	gs_buf_put(&info->con_buf, buf, count);
+	spin_unlock_irqrestore(&info->con_lock, flags);
+
+	wake_up_process(info->console_thread);
+}
+
+static struct tty_driver *gs_console_device(struct console *co, int *index)
+{
+	struct tty_driver **p = (struct tty_driver **)co->data;
+
+	if (!*p)
+		return NULL;
+
+	*index = co->index;
+	return *p;
+}
+
+static struct console gserial_cons = {
+	.name =		"ttyGS",
+	.write =	gs_console_write,
+	.device =	gs_console_device,
+	.setup =	gs_console_setup,
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+	.data =		&gs_tty_driver,
+};
+
+static void gserial_console_init(void)
+{
+	register_console(&gserial_cons);
+}
+
+static void gserial_console_exit(void)
+{
+	struct gscons_info *info = &gscons_info;
+
+	unregister_console(&gserial_cons);
+	kthread_stop(info->console_thread);
+	gs_buf_free(&info->con_buf);
+}
+
+#else
+
+static int gs_console_connect(int port_num)
+{
+	return 0;
+}
+
+static void gs_console_disconnect(struct usb_ep *ep)
+{
+}
+
+static void gserial_console_init(void)
+{
+}
+
+static void gserial_console_exit(void)
+{
+}
+
+#endif
+
 static int
 gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
 {
@@ -1096,6 +1350,7 @@ void gserial_free_line(unsigned char port_num)
 
 	gserial_free_port(port);
 	tty_unregister_device(gs_tty_driver, port_num);
+	gserial_console_exit();
 }
 EXPORT_SYMBOL_GPL(gserial_free_line);
 
@@ -1138,6 +1393,7 @@ int gserial_alloc_line(unsigned char *line_num)
 		goto err;
 	}
 	*line_num = port_num;
+	gserial_console_init();
 err:
 	return ret;
 }
@@ -1219,6 +1475,7 @@ int gserial_connect(struct gserial *gser, u8 port_num)
 			gser->disconnect(gser);
 	}
 
+	status = gs_console_connect(port_num);
 	spin_unlock_irqrestore(&port->port_lock, flags);
 
 	return status;
@@ -1277,6 +1534,7 @@ void gserial_disconnect(struct gserial *gser)
 	port->read_allocated = port->read_started =
 		port->write_allocated = port->write_started = 0;
 
+	gs_console_disconnect(gser->in);
 	spin_unlock_irqrestore(&port->port_lock, flags);
 }
 EXPORT_SYMBOL_GPL(gserial_disconnect);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists