[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <c197002de845b07e4980b203f2fbd28469ee1ce8.1448270813.git.stanimir.varbanov@linaro.org>
Date: Mon, 23 Nov 2015 11:29:03 +0200
From: Stanimir Varbanov <stanimir.varbanov@...aro.org>
To: linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-pci@...r.kernel.org, Bjorn Helgaas <bhelgaas@...gle.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Rob Herring <robh@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Pawel Moll <pawel.moll@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Arnd Bergmann <arnd@...db.de>,
Jingoo Han <jingoohan1@...il.com>,
Pratyush Anand <pratyush.anand@...il.com>,
Bjorn Andersson <bjorn.andersson@...ymobile.com>,
Stanimir Varbanov <stanimir.varbanov@...aro.org>
Subject: [PATCH v3 6/6] ARM: dts: ifc6410: enable pcie dt node for this board
Enable pcie dt node and fill pcie dt node with regulator, pinctrl
and reset gpio, to use the pcie on the ifc6410 board.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@...aro.org>
---
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 11ac608b6d50..bdee36a9b418 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -47,6 +47,18 @@
bias-disable;
};
};
+
+ pcie0_pins: pcie0_pinmux {
+ mux {
+ pins = "gpio27";
+ function = "gpio";
+ };
+ conf {
+ pins = "gpio27";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
};
rpm@...000 {
@@ -123,6 +135,10 @@
pm8921_lvs1: lvs1 {
bias-pull-down;
};
+
+ pm8921_lvs6: lvs6 {
+ bias-pull-down;
+ };
};
};
@@ -231,6 +247,16 @@
status = "okay";
};
+ pci@...00000 {
+ status = "ok";
+ vdda-supply = <&pm8921_s3>;
+ vdda_phy-supply = <&pm8921_lvs6>;
+ vdda_refclk-supply = <&ext_3p3v>;
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+ perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+ };
+
qcom,ssbi@...000 {
pmic@0 {
gpio@150 {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists