| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <9b80d6c1db4d7e2b5ee5dc0056a3d8284e7c2b9b.1448375184.git.jpinto@synopsys.com>
Date: Tue, 24 Nov 2015 14:32:06 +0000
From: Joao Pinto <Joao.Pinto@...opsys.com>
To: linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: bhelgaas@...gle.com, CARLOS.PALMINHA@...opsys.com,
Vineet.Gupta1@...opsys.com, Alexey.Brodkin@...opsys.com,
Joao Pinto <Joao.Pinto@...opsys.com>
Subject: [PATCH 2/2] PCI support added to ARC
This patch adds PCI support to ARC and updates drivers/pci Makefile enabling
the ARC arch to use the generic PCI setup functions.
Signed-off-by: Joao Pinto <jpinto@...opsys.com>
---
arch/arc/Kconfig | 22 +++
arch/arc/include/asm/dma.h | 5 +
arch/arc/include/asm/io.h | 2 +
arch/arc/include/asm/mach/pci.h | 97 +++++++++++
arch/arc/include/asm/pci.h | 34 ++++
arch/arc/kernel/Makefile | 1 +
arch/arc/kernel/pcibios.c | 360 ++++++++++++++++++++++++++++++++++++++++
arch/arc/mm/ioremap.c | 29 +++-
arch/arc/plat-axs10x/Kconfig | 1 +
drivers/pci/Makefile | 1 +
10 files changed, 551 insertions(+), 1 deletion(-)
create mode 100644 arch/arc/include/asm/mach/pci.h
create mode 100644 arch/arc/include/asm/pci.h
create mode 100644 arch/arc/kernel/pcibios.c
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 2c2ac3f..5b526a3 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -19,6 +19,7 @@ config ARC
select GENERIC_FIND_FIRST_BIT
# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
select GENERIC_IRQ_SHOW
+ select GENERIC_PCI_IOMAP
select GENERIC_PENDING_IRQ if SMP
select GENERIC_SMP_IDLE_THREAD
select HAVE_ARCH_KGDB
@@ -39,6 +40,9 @@ config ARC
select PERF_USE_VMALLOC
select HAVE_DEBUG_STACKOVERFLOW
+config MIGHT_HAVE_PCI
+ bool
+
config TRACE_IRQFLAGS_SUPPORT
def_bool y
@@ -110,6 +114,24 @@ config ISA_ARCV2
endchoice
+menu "Bus Support"
+
+config PCI
+ bool "PCI support" if MIGHT_HAVE_PCI
+ help
+ PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside
+ your box.Find out if your board/platform have PCI.
+ Note: PCIE support for Synopsys Device will be available only when
+ HAPS DX is configured with PCIE RC bitmap. If you have PCI, say Y, otherwise N.
+
+config PCI_SYSCALL
+ def_bool PCI
+
+source "drivers/pci/Kconfig"
+source "drivers/pci/pcie/Kconfig"
+
+endmenu
+
menu "ARC CPU Configuration"
choice
diff --git a/arch/arc/include/asm/dma.h b/arch/arc/include/asm/dma.h
index ca7c451..37942fa 100644
--- a/arch/arc/include/asm/dma.h
+++ b/arch/arc/include/asm/dma.h
@@ -10,5 +10,10 @@
#define ASM_ARC_DMA_H
#define MAX_DMA_ADDRESS 0xC0000000
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy (0)
+#endif
#endif
diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index 694ece8..d86c2e3 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -17,6 +17,8 @@ extern void __iomem *ioremap(unsigned long physaddr, unsigned long size);
extern void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
unsigned long flags);
extern void iounmap(const void __iomem *addr);
+extern void __iomem *ioport_map(unsigned long port, unsigned int size);
+extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr);
#define ioremap_nocache(phy, sz) ioremap(phy, sz)
#define ioremap_wc(phy, sz) ioremap(phy, sz)
diff --git a/arch/arc/include/asm/mach/pci.h b/arch/arc/include/asm/mach/pci.h
new file mode 100644
index 0000000..9e75277
--- /dev/null
+++ b/arch/arc/include/asm/mach/pci.h
@@ -0,0 +1,97 @@
+/*
+ * arch/arc/include/asm/mach/pci.h
+ *
+ * Copyright (C) 2004-2014 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_PCI_H
+#define __ASM_MACH_PCI_H
+
+#include <linux/ioport.h>
+
+struct pci_sys_data;
+struct pci_ops;
+struct pci_bus;
+struct device;
+
+struct hw_pci {
+#ifdef CONFIG_PCI_DOMAINS
+ int domain;
+#endif
+ struct pci_ops *ops;
+ int nr_controllers;
+ void **private_data;
+ int (*setup)(int nr, struct pci_sys_data *);
+ struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
+ void (*preinit)(void);
+ void (*postinit)(void);
+ u8 (*swizzle)(struct pci_dev *dev, u8 *pin);
+ int (*map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
+ resource_size_t (*align_resource)(struct pci_dev *dev,
+ const struct resource *res,
+ resource_size_t start,
+ resource_size_t size,
+ resource_size_t align);
+ void (*add_bus)(struct pci_bus *bus);
+ void (*remove_bus)(struct pci_bus *bus);
+};
+
+/*
+ * Per-controller structure
+ */
+struct pci_sys_data {
+#ifdef CONFIG_PCI_DOMAINS
+ int domain;
+#endif
+ struct list_head node;
+ int busnr; /* primary bus number */
+ u64 mem_offset; /* bus->cpu memory mapping offset */
+ unsigned long io_offset; /* bus->cpu IO mapping offset */
+ struct pci_bus *bus; /* PCI bus */
+ struct list_head resources; /* root bus resources (apertures) */
+ struct resource io_res;
+ char io_res_name[12];
+ /* Bridge swizzling */
+ u8 (*swizzle)(struct pci_dev *, u8 *);
+ /* IRQ mapping */
+ int (*map_irq)(const struct pci_dev *, u8, u8);
+ /* Resource alignement requirements */
+ resource_size_t (*align_resource)(struct pci_dev *dev,
+ const struct resource *res,
+ resource_size_t start,
+ resource_size_t size,
+ resource_size_t align);
+ void (*add_bus)(struct pci_bus *bus);
+ void (*remove_bus)(struct pci_bus *bus);
+ void *private_data; /* platform controller private data */
+};
+
+/*
+ * Call this with your hw_pci struct to initialise the PCI system.
+ */
+void pci_common_init_dev(struct device *, struct hw_pci *);
+
+/*
+ * Compatibility wrapper for older platforms that do not care about
+ * passing the parent device.
+ */
+static inline void pci_common_init(struct hw_pci *hw)
+{
+ pci_common_init_dev(NULL, hw);
+}
+
+/*
+ * Setup early fixed I/O mapping.
+ */
+#if defined(CONFIG_PCI)
+extern void pci_map_io_early(unsigned long pfn);
+#else
+static inline void pci_map_io_early(unsigned long pfn) {}
+#endif
+
+#endif /* __ASM_MACH_PCI_H */
+
diff --git a/arch/arc/include/asm/pci.h b/arch/arc/include/asm/pci.h
new file mode 100644
index 0000000..085b15f
--- /dev/null
+++ b/arch/arc/include/asm/pci.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_PCI_H
+#define _ASM_ARC_PCI_H
+
+#ifdef __KERNEL__
+#include <asm-generic/pci-dma-compat.h>
+#include <asm-generic/pci-bridge.h>
+
+#include <asm/mach/pci.h> /* for pci_sys_data */
+
+extern unsigned long pcibios_min_io;
+#define PCIBIOS_MIN_IO pcibios_min_io
+extern unsigned long pcibios_min_mem;
+#define PCIBIOS_MIN_MEM pcibios_min_mem
+
+#define pcibios_assign_all_busses() 1
+/*
+ * The PCI address space does equal the physical memory address space.
+ * The networking and block device layers use this boolean for bounce
+ * buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS (1)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_ARC_PCI_H */
+
diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
index e7f3625..1bc2036 100644
--- a/arch/arc/kernel/Makefile
+++ b/arch/arc/kernel/Makefile
@@ -12,6 +12,7 @@ obj-y := arcksyms.o setup.o irq.o time.o reset.o ptrace.o process.o devtree.o
obj-y += signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o clk.o
obj-$(CONFIG_ISA_ARCOMPACT) += entry-compact.o intc-compact.o
obj-$(CONFIG_ISA_ARCV2) += entry-arcv2.o intc-arcv2.o
+obj-$(CONFIG_PCI) += pcibios.o
obj-$(CONFIG_MODULES) += arcksyms.o module.o
obj-$(CONFIG_SMP) += smp.o
diff --git a/arch/arc/kernel/pcibios.c b/arch/arc/kernel/pcibios.c
new file mode 100644
index 0000000..a7bd76a
--- /dev/null
+++ b/arch/arc/kernel/pcibios.c
@@ -0,0 +1,360 @@
+/*
+ * Copyright (C) 2014-2015 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/bootmem.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+
+#include <asm/pci.h>
+#include <asm/mach/pci.h>
+
+static int pcibios_init_resources(int busnr, struct pci_sys_data *sys)
+{
+ int ret;
+ struct pci_host_bridge_window *window;
+
+ if (list_empty(&sys->resources)) {
+ pci_add_resource_offset(&sys->resources,
+ &iomem_resource, sys->mem_offset);
+ }
+
+ list_for_each_entry(window, &sys->resources, list) {
+ if (resource_type(window->res) == IORESOURCE_IO)
+ return 0;
+ }
+
+ sys->io_res.start = (busnr * SZ_64K) ? : pcibios_min_io;
+ sys->io_res.end = (busnr + 1) * SZ_64K - 1;
+ sys->io_res.flags = IORESOURCE_IO;
+ sys->io_res.name = sys->io_res_name;
+ sprintf(sys->io_res_name, "PCI%d I/O", busnr);
+
+ ret = request_resource(&ioport_resource, &sys->io_res);
+ if (ret) {
+ pr_err("PCI: unable to allocate I/O port region (%d)\n", ret);
+ return ret;
+ }
+ pci_add_resource_offset(&sys->resources, &sys->io_res,
+ sys->io_offset);
+
+ return 0;
+}
+
+
+static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
+ struct list_head *head)
+{
+ struct pci_sys_data *sys = NULL;
+ int ret;
+ int nr, busnr;
+
+ for (nr = busnr = 0; nr < hw->nr_controllers; nr++) {
+ sys = kzalloc(sizeof(struct pci_sys_data), GFP_KERNEL);
+ if (!sys)
+ panic("PCI: unable to allocate sys data!");
+
+#ifdef CONFIG_PCI_DOMAINS
+ sys->domain = hw->domain;
+#endif
+ sys->busnr = busnr;
+ sys->swizzle = hw->swizzle;
+ sys->map_irq = hw->map_irq;
+ sys->align_resource = hw->align_resource;
+ sys->add_bus = hw->add_bus;
+ sys->remove_bus = hw->remove_bus;
+ INIT_LIST_HEAD(&sys->resources);
+
+
+ if (hw->private_data)
+ sys->private_data = hw->private_data[nr];
+
+ ret = hw->setup(nr, sys);
+
+ if (ret > 0) {
+ ret = pcibios_init_resources(nr, sys);
+ if (ret) {
+ kfree(sys);
+ break;
+ }
+
+ if (hw->scan)
+ sys->bus = hw->scan(nr, sys);
+ else
+ sys->bus = pci_scan_root_bus(parent, sys->busnr,
+ hw->ops, sys, &sys->resources);
+
+ if (!sys->bus)
+ panic("PCI: unable to scan bus!");
+
+ busnr = sys->bus->busn_res.end + 1;
+
+ list_add(&sys->node, head);
+ } else {
+ kfree(sys);
+ if (ret < 0)
+ break;
+ }
+ }
+}
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+ return 0;
+}
+
+void pcibios_add_bus(struct pci_bus *bus)
+{
+ struct pci_sys_data *sys = bus->sysdata;
+
+ if (sys->add_bus)
+ sys->add_bus(bus);
+}
+
+void pcibios_remove_bus(struct pci_bus *bus)
+{
+ struct pci_sys_data *sys = bus->sysdata;
+
+ if (sys->remove_bus)
+ sys->remove_bus(bus);
+}
+
+/*
+ * Swizzle the device pin each time we cross a bridge. If a platform does
+ * not provide a swizzle function, we perform the standard PCI swizzling.
+ *
+ * The default swizzling walks up the bus tree one level at a time, applying
+ * the standard swizzle function at each step, stopping when it finds the PCI
+ * root bus. This will return the slot number of the bridge device on the
+ * root bus and the interrupt pin on that device which should correspond
+ * with the downstream device interrupt.
+ *
+ * Platforms may override this, in which case the slot and pin returned
+ * depend entirely on the platform code. However, please note that the
+ * PCI standard swizzle is implemented on plug-in cards and Cardbus based
+ * PCI extenders, so it can not be ignored.
+ */
+static u8 pcibios_swizzle(struct pci_dev *dev, u8 *pin)
+{
+ struct pci_sys_data *sys = dev->sysdata;
+ int slot, oldpin = *pin;
+
+ if (sys->swizzle)
+ slot = sys->swizzle(dev, pin);
+ else
+ slot = pci_common_swizzle(dev, pin);
+
+ return slot;
+}
+
+/*
+ * Map a slot/pin to an IRQ.
+ */
+static int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct pci_sys_data *sys = dev->sysdata;
+ int irq = -1;
+
+ if (sys->map_irq)
+ irq = sys->map_irq(dev, slot, pin);
+
+ return irq;
+}
+
+void pci_common_init_dev(struct device *parent, struct hw_pci *hw)
+{
+ struct pci_sys_data *sys;
+ LIST_HEAD(head);
+
+ pci_add_flags(PCI_REASSIGN_ALL_RSRC);
+ if (hw->preinit)
+ hw->preinit();
+ pcibios_init_hw(parent, hw, &head);
+ if (hw->postinit)
+ hw->postinit();
+
+ pci_fixup_irqs(pcibios_swizzle, pcibios_map_irq);
+
+ list_for_each_entry(sys, &head, node) {
+ struct pci_bus *bus = sys->bus;
+
+ if (!pci_has_flag(PCI_PROBE_ONLY)) {
+ /*
+ * Size the bridge windows.
+ */
+ pci_bus_size_bridges(bus);
+
+ /*
+ * Assign resources.
+ */
+ pci_bus_assign_resources(bus);
+ }
+
+ /*
+ * Tell drivers about devices found.
+ */
+ pci_bus_add_devices(bus);
+ }
+}
+
+/*
+ * We don't have to worry about legacy ISA devices, so nothing to do here
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ return res->start;
+}
+
+/**
+ * pcibios_enable_device - Enable I/O and memory.
+ * @dev: PCI device to be enabled
+ */
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ u16 cmd, old_cmd;
+ int idx;
+ struct resource *r;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
+ for (idx = 0; idx < 6; idx++) {
+ /* Only set up the requested stuff */
+ if (!(mask & (1 << idx)))
+ continue;
+
+ r = dev->resource + idx;
+ if (!r->start && r->end) {
+ pr_err("PCI: Device %s not available because"/
+ " of resource collisions\n", pci_name(dev));
+ return -EINVAL;
+ }
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
+ cmd |= PCI_COMMAND_MEMORY;
+ }
+
+ /*
+ * Bridges (eg, cardbus bridges) need to be fully enabled
+ */
+ if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
+ cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+
+ if (cmd != old_cmd) {
+ pr_info("PCI: enabling device %s (%04x -> %04x)\n",
+ pci_name(dev), old_cmd, cmd);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ }
+ return 0;
+}
+
+/*
+ * If the bus contains any of these devices, then we must not turn on
+ * parity checking of any kind. Currently this is CyberPro 20x0 only.
+ */
+static inline int pdev_bad_for_parity(struct pci_dev *dev)
+{
+ return ((dev->vendor == PCI_VENDOR_ID_INTERG &&
+ (dev->device == PCI_DEVICE_ID_INTERG_2000 ||
+ dev->device == PCI_DEVICE_ID_INTERG_2010)) ||
+ (dev->vendor == PCI_VENDOR_ID_ITE &&
+ dev->device == PCI_DEVICE_ID_ITE_8152));
+
+}
+
+/*
+ * pcibios_fixup_bus - Called after each bus is probed,
+ * but before its children are examined.
+ */
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+ u16 features = PCI_COMMAND_SERR | PCI_COMMAND_PARITY
+ | PCI_COMMAND_FAST_BACK;
+
+ /*
+ * Walk the devices on this bus, working out what we can
+ * and can't support.
+ */
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ u16 status;
+
+ pci_read_config_word(dev, PCI_STATUS, &status);
+
+ /*
+ * If any device on this bus does not support fast back
+ * to back transfers, then the bus as a whole is not able
+ * to support them. Having fast back to back transfers
+ * on saves us one PCI cycle per transaction.
+ */
+ if (!(status & PCI_STATUS_FAST_BACK))
+ features &= ~PCI_COMMAND_FAST_BACK;
+
+ if (pdev_bad_for_parity(dev))
+ features &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
+
+ switch (dev->class >> 8) {
+ case PCI_CLASS_BRIDGE_PCI:
+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
+ status |= PCI_BRIDGE_CTL_PARITY
+ |PCI_BRIDGE_CTL_MASTER_ABORT;
+ status &= ~(PCI_BRIDGE_CTL_BUS_RESET
+ |PCI_BRIDGE_CTL_FAST_BACK);
+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, status);
+ break;
+
+ case PCI_CLASS_BRIDGE_CARDBUS:
+ pci_read_config_word(dev, PCI_CB_BRIDGE_CONTROL,
+ &status);
+ status |= PCI_CB_BRIDGE_CTL_PARITY
+ |PCI_CB_BRIDGE_CTL_MASTER_ABORT;
+ pci_write_config_word(dev, PCI_CB_BRIDGE_CONTROL,
+ status);
+ break;
+ }
+ }
+
+ /*
+ * Now walk the devices again, this time setting them up.
+ */
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ u16 cmd;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd |= features;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
+ L1_CACHE_BYTES >> 2);
+ }
+
+ /*
+ * Propagate the flags to the PCI bridge.
+ */
+ if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ if (features & PCI_COMMAND_FAST_BACK)
+ bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK;
+ if (features & PCI_COMMAND_PARITY)
+ bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY;
+ }
+
+ /*
+ * Report what we did for this bus
+ */
+ pr_info("PCI: bus%d: Fast back to back transfers %sabled\n",
+ bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
+}
+EXPORT_SYMBOL(pcibios_fixup_bus);
+
diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c
index 739e65f..583c9fe 100644
--- a/arch/arc/mm/ioremap.c
+++ b/arch/arc/mm/ioremap.c
@@ -13,6 +13,26 @@
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/cache.h>
+#include <linux/sizes.h>
+
+#ifdef CONFIG_PCI
+unsigned long pcibios_min_io = 0x100;
+EXPORT_SYMBOL(pcibios_min_io);
+
+unsigned long pcibios_min_mem = 0x100000;
+EXPORT_SYMBOL(pcibios_min_mem);
+#endif
+
+inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+ return port;
+}
+EXPORT_SYMBOL(ioport_map);
+
+inline void ioport_unmap(void __iomem *addr)
+{
+}
+EXPORT_SYMBOL(ioport_unmap);
void __iomem *ioremap(unsigned long paddr, unsigned long size)
{
@@ -80,7 +100,6 @@ void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
}
EXPORT_SYMBOL(ioremap_prot);
-
void iounmap(const void __iomem *addr)
{
if (addr >= (void __force __iomem *)ARC_UNCACHED_ADDR_SPACE)
@@ -89,3 +108,11 @@ void iounmap(const void __iomem *addr)
vfree((void *)(PAGE_MASK & (unsigned long __force)addr));
}
EXPORT_SYMBOL(iounmap);
+
+#ifdef CONFIG_PCI
+int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr)
+{
+ return ioremap_nocache(phys_addr + offset, SZ_64K);
+}
+EXPORT_SYMBOL_GPL(pci_ioremap_io);
+#endif
diff --git a/arch/arc/plat-axs10x/Kconfig b/arch/arc/plat-axs10x/Kconfig
index d475f9d..33b5db6 100644
--- a/arch/arc/plat-axs10x/Kconfig
+++ b/arch/arc/plat-axs10x/Kconfig
@@ -8,6 +8,7 @@
menuconfig ARC_PLAT_AXS10X
bool "Synopsys ARC AXS10x Software Development Platforms"
+ select MIGHT_HAVE_PCI
select DW_APB_ICTL
select GPIO_DWAPB
select OF_GPIO
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index be3f631..2154092 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_PCI_IOV) += iov.o
# Some architectures use the generic PCI setup functions
#
obj-$(CONFIG_ALPHA) += setup-irq.o
+obj-$(CONFIG_ARC) += setup-irq.o
obj-$(CONFIG_ARM) += setup-irq.o
obj-$(CONFIG_ARM64) += setup-irq.o
obj-$(CONFIG_UNICORE32) += setup-irq.o
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists