[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20151125000727.GA26709@rob-hp-laptop>
Date: Tue, 24 Nov 2015 18:07:27 -0600
From: Rob Herring <robh@...nel.org>
To: Lee Jones <lee.jones@...aro.org>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
kernel@...inux.com, maxime.coquelin@...com, ohad@...ery.com,
devicetree@...r.kernel.org, Nathan_Lynch@...tor.com,
f.fainelli@...il.com, ludovic.barre@...com, s-anna@...com
Subject: Re: [RESEND v4 1/6] remoteproc: dt: Provide bindings for ST's Remote
Processor Controller driver
On Tue, Nov 24, 2015 at 01:14:17PM +0000, Lee Jones wrote:
> Signed-off-by: Ludovic Barre <ludovic.barre@...com>
> Signed-off-by: Lee Jones <lee.jones@...aro.org>
> ---
> .../devicetree/bindings/remoteproc/st-rproc.txt | 41 ++++++++++++++++++++++
Acked-by: Rob Herring <robh@...nel.org>
> 1 file changed, 41 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/st-rproc.txt
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/st-rproc.txt b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
> new file mode 100644
> index 0000000..1031bcd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
> @@ -0,0 +1,41 @@
> +STMicroelectronics Co-Processor Bindings
> +----------------------------------------
> +
> +This binding provides support for adjunct processors found on ST SoCs.
> +
> +Co-processors can be controlled from the bootloader or the primary OS. If
> +the bootloader starts a co-processor, the primary OS must detect its state
> +and act accordingly.
> +
> +Required properties:
> +- compatible Should be one of:
> + "st,st231-rproc"
> + "st,st40-rproc"
> +- memory-region Reserved memory (See: ../reserved-memory/reserved-memory.txt)
> +- resets Reset lines (See: ../reset/reset.txt)
> +- reset-names Must be "sw_reset" and "pwr_reset"
> +- clocks Clock for co-processor (See: ../clock/clock-bindings.txt)
> +- clock-frequency Clock frequency to set co-processor at if the bootloader
> + hasn't already done so
> +- st,syscfg System configuration register which holds the boot vector
> + for the co-processor
> + 1st cell: Phandle to syscon block
> + 2nd cell: Boot vector register offset
> +
> +Example:
> +
> + audio_reserved: rproc@...00000 {
> + compatible = "shared-dma-pool";
> + reg = <0x42000000 0x01000000>;
> + no-map;
> + };
> +
> + st231-audio {
> + compatible = "st,st231-rproc";
> + memory-region = <&audio_reserved>;
> + resets = <&softreset STIH407_ST231_AUD_SOFTRESET>;
> + reset-names = "sw_reset";
> + clocks = <&clk_s_c0_flexgen CLK_ST231_AUD_0>;
> + clock-frequency = <600000000>;
> + st,syscfg = <&syscfg_core 0x228>;
> + };
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists