| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1448505224-29430-1-git-send-email-yamada.masahiro@socionext.com>
Date: Thu, 26 Nov 2015 11:33:44 +0900
From: Masahiro Yamada <yamada.masahiro@...ionext.com>
To: arm@...nel.org
Cc: Masahiro Yamada <yamada.masahiro@...ionext.com>,
devicetree@...r.kernel.org, Kumar Gala <galak@...eaurora.org>,
linux-kernel@...r.kernel.org,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Will Deacon <will.deacon@....com>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v2] arm64: dts: uniphier: add PH1-LD10 SoC/board support
This is the first ARMv8 SoC from Socionext Inc.
Signed-off-by: Masahiro Yamada <yamada.masahiro@...ionext.com>
---
Changes in v2:
- Split into a single patch
MAINTAINERS | 1 +
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/socionext/Makefile | 4 +
.../boot/dts/socionext/uniphier-ph1-ld10-ref.dts | 95 +++++++
.../boot/dts/socionext/uniphier-ph1-ld10.dtsi | 280 +++++++++++++++++++++
.../arm64/boot/dts/socionext/uniphier-pinctrl.dtsi | 1 +
.../boot/dts/socionext/uniphier-support-card.dtsi | 1 +
7 files changed, 383 insertions(+)
create mode 100644 arch/arm64/boot/dts/socionext/Makefile
create mode 100644 arch/arm64/boot/dts/socionext/uniphier-ph1-ld10-ref.dts
create mode 100644 arch/arm64/boot/dts/socionext/uniphier-ph1-ld10.dtsi
create mode 120000 arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi
create mode 120000 arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi
diff --git a/MAINTAINERS b/MAINTAINERS
index 3f92804..99a1424 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1642,6 +1642,7 @@ F: arch/arm/boot/dts/uniphier*
F: arch/arm/include/asm/hardware/cache-uniphier.h
F: arch/arm/mach-uniphier/
F: arch/arm/mm/cache-uniphier.c
+F: arch/arm64/boot/dts/socionext/
F: drivers/i2c/busses/i2c-uniphier*
F: drivers/pinctrl/uniphier/
F: drivers/tty/serial/8250/8250_uniphier.c
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index eb3c42d..6672a96 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -11,6 +11,7 @@ dts-dirs += marvell
dts-dirs += mediatek
dts-dirs += qcom
dts-dirs += rockchip
+dts-dirs += socionext
dts-dirs += sprd
dts-dirs += xilinx
diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile
new file mode 100644
index 0000000..8d72771
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/Makefile
@@ -0,0 +1,4 @@
+dtb-$(CONFIG_ARCH_UNIPHIER) += uniphier-ph1-ld10-ref.dtb
+
+always := $(dtb-y)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld10-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld10-ref.dts
new file mode 100644
index 0000000..3e53317
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld10-ref.dts
@@ -0,0 +1,95 @@
+/*
+ * Device Tree Source for UniPhier PH1-LD10 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@...ionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-ld10.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+ model = "UniPhier PH1-LD10 Reference Board";
+ compatible = "socionext,ph1-ld10-ref", "socionext,ph1-ld10";
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0xc0000000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ };
+};
+
+&extbus {
+ ranges = <1 0x00000000 0x42000000 0x02000000>;
+};
+
+&support_card {
+ ranges = <0x00000000 1 0x01f00000 0x00100000>;
+};
+
+ðsc {
+ interrupts = <0 48 4>;
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld10.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld10.dtsi
new file mode 100644
index 0000000..1d66602
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld10.dtsi
@@ -0,0 +1,280 @@
+/*
+ * Device Tree Source for UniPhier PH1-LD10 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@...ionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ compatible = "socionext,ph1-ld10";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0 0x000>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x80000100>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0 0x001>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x80000100>;
+ };
+
+ cpu2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0 0x100>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x80000100>;
+ };
+
+ cpu3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0 0x101>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x80000100>;
+ };
+ };
+
+ clocks {
+ uart_clk: uart_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <58820000>;
+ };
+
+ i2c_clk: i2c_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xf01>,
+ <1 14 0xf01>,
+ <1 11 0xf01>,
+ <1 10 0xf01>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+
+ extbus: extbus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ serial0: serial@...06800 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006800 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ interrupts = <0 33 4>;
+ clocks = <&uart_clk>;
+ };
+
+ serial1: serial@...06900 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006900 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ interrupts = <0 35 4>;
+ clocks = <&uart_clk>;
+ };
+
+ serial2: serial@...06a00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006a00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ interrupts = <0 37 4>;
+ clocks = <&uart_clk>;
+ };
+
+ serial3: serial@...06b00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006b00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ interrupts = <0 177 4>;
+ clocks = <&uart_clk>;
+ };
+
+ i2c0: i2c@...80000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58780000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ interrupts = <0 41 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c1: i2c@...81000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58781000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ interrupts = <0 42 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c2: i2c@...82000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58782000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ interrupts = <0 43 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c3: i2c@...83000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58783000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ interrupts = <0 44 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c4: i2c@...84000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58784000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 45 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
+
+ i2c5: i2c@...85000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58785000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 25 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
+
+ i2c6: i2c@...86000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58786000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 26 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
+
+ pinctrl: pinctrl@...01000 {
+ compatible = "socionext,ph1-ld10-pinctrl", "syscon";
+ reg = <0x5f801000 0xe00>;
+ };
+
+ gic: interrupt-controller@...00000 {
+ compatible = "arm,gic-v3";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x5fe00000 0x10000>, /* GICD */
+ <0x5fe80000 0x80000>; /* GICR */
+ interrupts = <1 9 4>;
+ };
+ };
+};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi
new file mode 120000
index 0000000..f42fb6f
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi
@@ -0,0 +1 @@
+../../../../arm/boot/dts/uniphier-pinctrl.dtsi
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi
new file mode 120000
index 0000000..1246db9
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi
@@ -0,0 +1 @@
+../../../../arm/boot/dts/uniphier-support-card.dtsi
\ No newline at end of file
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists