[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAOMZO5BF=V2Q6BT17UHvx=QzupDaC1d=negP1URP4kaWZg9eAA@mail.gmail.com>
Date: Mon, 30 Nov 2015 10:17:32 -0200
From: Fabio Estevam <festevam@...il.com>
To: Lothar Waßmann <LW@...o-electronics.de>
Cc: Andrew Lunn <andrew@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Fabio Estevam <fabio.estevam@...escale.com>,
Greg Ungerer <gerg@...inux.org>,
Kevin Hao <haokexin@...il.com>,
Lucas Stach <l.stach@...gutronix.de>,
Nimrod Andy <B38611@...escale.com>,
Philippe Reynes <tremyfr@...il.com>,
Richard Cochran <richardcochran@...il.com>,
Russell King <rmk+kernel@....linux.org.uk>,
Sascha Hauer <s.hauer@...gutronix.de>,
Stefan Agner <stefan@...er.ch>,
linux-kernel <linux-kernel@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>
Subject: Re: [PATCH 2/3] net: fec: convert to using gpiod framework
On Mon, Nov 30, 2015 at 9:32 AM, Lothar Waßmann <LW@...o-electronics.de> wrote:
> - gpio_set_value_cansleep(phy_reset, 1);
> + gpiod_set_value_cansleep(phy_reset, 1);
This will break some existing DTBs.
Currently the fec driver does not care whether 'phy-reset-gpios' is
active low or active high. (Yes, it was a mistake to assume in the
driver that it is always active low.)
After this change the polarity will be taken into account and may
break some dtb's.
I suggest you to send a single patch with the minimum changes to fix
the regression caused by 8fff755e9f8d ("net: fec: Ensure clocks are
enabled while using mdio bus").
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists