| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <565CB86F.4040303@simon.arlott.org.uk>
Date: Mon, 30 Nov 2015 20:58:23 +0000
From: Simon Arlott <simon@...e.lp0.eu>
To: Philipp Zabel <p.zabel@...gutronix.de>,
Kevin Cernekee <cernekee@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
Cc: linux-kernel@...r.kernel.org,
MIPS Mailing List <linux-mips@...ux-mips.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>
Subject: [PATCH 2/2] reset: bcm63xx: Add support for the BCM63xx soft-reset
controller
The BCM63xx contains a soft-reset controller activated by setting
a bit (that must previously have cleared).
Signed-off-by: Simon Arlott <simon@...e.lp0.eu>
---
MAINTAINERS | 1 +
drivers/reset/Kconfig | 9 +++
drivers/reset/Makefile | 1 +
drivers/reset/reset-bcm63xx.c | 134 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 145 insertions(+)
create mode 100644 drivers/reset/reset-bcm63xx.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 07613dd..55e493a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2378,6 +2378,7 @@ F: drivers/irqchip/irq-bcm63*
F: drivers/irqchip/irq-bcm7*
F: drivers/irqchip/irq-brcmstb*
F: drivers/regulator/bcm63*
+F: drivers/reset/reset-bcm63*
F: include/linux/bcm63xx_wdt.h
BROADCOM TG3 GIGABIT ETHERNET DRIVER
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 0615f50..064dad2 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -12,4 +12,13 @@ menuconfig RESET_CONTROLLER
If unsure, say no.
+if RESET_CONTROLLER
+
+config RESET_BCM63XX
+ bool "BCM63xx Reset Controller"
+ help
+ Support resetting of devices on BCM63xx boards.
+
+endif
+
source "drivers/reset/sti/Kconfig"
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 85d5904..f6e2171 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
obj-$(CONFIG_ARCH_STI) += sti/
obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
obj-$(CONFIG_ATH79) += reset-ath79.o
+obj-$(CONFIG_RESET_BCM63XX) += reset-bcm63xx.o
diff --git a/drivers/reset/reset-bcm63xx.c b/drivers/reset/reset-bcm63xx.c
new file mode 100644
index 0000000..46db57f
--- /dev/null
+++ b/drivers/reset/reset-bcm63xx.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2015 Simon Arlott
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Derived from reset-berlin.c:
+ * Copyright (C) 2014 Marvell Technology Group Ltd.
+ *
+ * Antoine Tenart <antoine.tenart@...e-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define to_bcm63xx_reset_priv(p) \
+ container_of((p), struct bcm63xx_reset_priv, rcdev)
+
+struct bcm63xx_reset_priv {
+ struct regmap *map;
+ u32 offset;
+ u32 mask; /* valid reset bits */
+ struct reset_controller_dev rcdev;
+ struct mutex mutex;
+};
+
+static int bcm63xx_reset_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct bcm63xx_reset_priv *priv = to_bcm63xx_reset_priv(rcdev);
+
+ mutex_lock(&priv->mutex);
+ regmap_write_bits(priv->map, priv->offset, BIT(id), 0);
+ usleep_range(10000, 20000);
+ regmap_write_bits(priv->map, priv->offset, BIT(id), BIT(id));
+ usleep_range(10000, 20000);
+ mutex_unlock(&priv->mutex);
+
+ return 0;
+}
+
+static int bcm63xx_reset_xlate(struct reset_controller_dev *rcdev,
+ const struct of_phandle_args *reset_spec)
+{
+ struct bcm63xx_reset_priv *priv = to_bcm63xx_reset_priv(rcdev);
+
+ if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
+ return -EINVAL;
+
+ if (reset_spec->args[0] >= rcdev->nr_resets)
+ return -EINVAL;
+
+ if (!(BIT(reset_spec->args[0]) & priv->mask))
+ return -EINVAL;
+
+ return reset_spec->args[0];
+}
+
+
+static struct reset_control_ops bcm63xx_reset_ops = {
+ .reset = bcm63xx_reset_reset,
+};
+
+static int __init bcm63xx_reset_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct bcm63xx_reset_priv *priv;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ mutex_init(&priv->mutex);
+
+ priv->map = syscon_regmap_lookup_by_phandle(np, "regmap");
+ if (IS_ERR(priv->map))
+ return PTR_ERR(priv->map);
+
+ if (of_property_read_u32(np, "offset", &priv->offset))
+ return -EINVAL;
+
+ /* valid reset bits */
+ if (of_property_read_u32(np, "mask", &priv->mask))
+ priv->mask = 0xffffffff;
+
+ priv->rcdev.owner = THIS_MODULE;
+ priv->rcdev.ops = &bcm63xx_reset_ops;
+ priv->rcdev.nr_resets = 32;
+ priv->rcdev.of_node = pdev->dev.of_node;
+ priv->rcdev.of_reset_n_cells = 1;
+ priv->rcdev.of_xlate = bcm63xx_reset_xlate;
+
+ ret = reset_controller_register(&priv->rcdev);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "unable to register reset controller: %d\n", ret);
+ return ret;
+ }
+
+ dev_info(&pdev->dev, "registered reset controller\n");
+ return 0;
+}
+
+static const struct of_device_id bcm63xx_reset_dt_match[] __initconst = {
+ { .compatible = "brcm,bcm63xx-reset" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bcm63xx_reset_dt_match);
+
+static struct platform_driver bcm63xx_reset_driver __refdata = {
+ .probe = bcm63xx_reset_probe,
+ .driver = {
+ .name = "bcm63xx-reset",
+ .of_match_table = bcm63xx_reset_dt_match,
+ },
+};
+module_platform_driver(bcm63xx_reset_driver);
+
+MODULE_DESCRIPTION("BCM63xx reset driver");
+MODULE_AUTHOR("Simon Arlott");
+MODULE_LICENSE("GPL");
--
2.1.4
--
Simon Arlott
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists