| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <565D9C25.3010704@simon.arlott.org.uk>
Date: Tue, 1 Dec 2015 13:09:57 +0000
From: Simon Arlott <simon@...e.lp0.eu>
To: Guenter Roeck <linux@...ck-us.net>,
Thomas Gleixner <tglx@...utronix.de>
Cc: Florian Fainelli <f.fainelli@...il.com>,
MIPS Mailing List <linux-mips@...ux-mips.org>,
Jonas Gorski <jogo@...nwrt.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Ralf Baechle <ralf@...ux-mips.org>,
Jason Cooper <jason@...edaemon.net>,
Marc Zyngier <marc.zyngier@....com>,
Kevin Cernekee <cernekee@...il.com>,
Wim Van Sebroeck <wim@...ana.be>,
Maxime Bizon <mbizon@...ebox.fr>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-watchdog@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>
Subject: [PATCH 09/11] watchdog: bcm63xx_wdt: Remove dependency on
mach-bcm63xx functions/defines
The bcm_readl() and bcm_writel() functions are only defined for
mach-bcm63xx, replace them with __raw_readl() and raw_writel().
The register defines required for the watchdog are in a mach-bcm63xx
header file. Move them to include/linux/bcm63xx_wdt.h so that they are
also available on other machine types.
Signed-off-by: Simon Arlott <simon@...e.lp0.eu>
---
MAINTAINERS | 1 +
arch/mips/bcm63xx/prom.c | 1 +
arch/mips/bcm63xx/setup.c | 1 +
arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 22 --------------------
drivers/watchdog/bcm63xx_wdt.c | 25 +++++++++++------------
include/linux/bcm63xx_wdt.h | 22 ++++++++++++++++++++
6 files changed, 37 insertions(+), 35 deletions(-)
create mode 100644 include/linux/bcm63xx_wdt.h
diff --git a/MAINTAINERS b/MAINTAINERS
index cd553a0..a381176 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2376,6 +2376,7 @@ F: arch/mips/boot/dts/brcm/bcm*.dts*
F: drivers/irqchip/irq-bcm63*
F: drivers/irqchip/irq-bcm7*
F: drivers/irqchip/irq-brcmstb*
+F: include/linux/bcm63xx_wdt.h
BROADCOM TG3 GIGABIT ETHERNET DRIVER
M: Prashant Sreedharan <prashant@...adcom.com>
diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c
index 7019e29..d2800fb 100644
--- a/arch/mips/bcm63xx/prom.c
+++ b/arch/mips/bcm63xx/prom.c
@@ -6,6 +6,7 @@
* Copyright (C) 2008 Maxime Bizon <mbizon@...ebox.fr>
*/
+#include <linux/bcm63xx_wdt.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/smp.h>
diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
index 2be9caa..181402f 100644
--- a/arch/mips/bcm63xx/setup.c
+++ b/arch/mips/bcm63xx/setup.c
@@ -6,6 +6,7 @@
* Copyright (C) 2008 Maxime Bizon <mbizon@...ebox.fr>
*/
+#include <linux/bcm63xx_wdt.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/delay.h>
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
index 5035f09..16a745b 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -441,28 +441,6 @@
/*************************************************************************
- * _REG relative to RSET_WDT
- *************************************************************************/
-
-/* Watchdog default count register */
-#define WDT_DEFVAL_REG 0x0
-
-/* Watchdog control register */
-#define WDT_CTL_REG 0x4
-
-/* Watchdog control register constants */
-#define WDT_START_1 (0xff00)
-#define WDT_START_2 (0x00ff)
-#define WDT_STOP_1 (0xee00)
-#define WDT_STOP_2 (0x00ee)
-
-/* Watchdog reset length register */
-#define WDT_RSTLEN_REG 0x8
-
-/* Watchdog soft reset register (BCM6328 only) */
-#define WDT_SOFTRESET_REG 0xc
-
-/*************************************************************************
* _REG relative to RSET_GPIO
*************************************************************************/
diff --git a/drivers/watchdog/bcm63xx_wdt.c b/drivers/watchdog/bcm63xx_wdt.c
index 2312dc2..f409523 100644
--- a/drivers/watchdog/bcm63xx_wdt.c
+++ b/drivers/watchdog/bcm63xx_wdt.c
@@ -13,6 +13,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/bcm63xx_wdt.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/errno.h>
@@ -27,8 +28,6 @@
#include <linux/resource.h>
#include <linux/platform_device.h>
-#include <bcm63xx_cpu.h>
-#include <bcm63xx_io.h>
#include <bcm63xx_regs.h>
#include <bcm63xx_timer.h>
@@ -58,9 +57,9 @@ static int bcm63xx_wdt_start(struct watchdog_device *wdd)
unsigned long flags;
raw_spin_lock_irqsave(&hw->lock, flags);
- bcm_writel(wdd->timeout * hw->clock_hz, hw->regs + WDT_DEFVAL_REG);
- bcm_writel(WDT_START_1, hw->regs + WDT_CTL_REG);
- bcm_writel(WDT_START_2, hw->regs + WDT_CTL_REG);
+ __raw_writel(wdd->timeout * hw->clock_hz, hw->regs + WDT_DEFVAL_REG);
+ __raw_writel(WDT_START_1, hw->regs + WDT_CTL_REG);
+ __raw_writel(WDT_START_2, hw->regs + WDT_CTL_REG);
hw->running = true;
raw_spin_unlock_irqrestore(&hw->lock, flags);
return 0;
@@ -72,8 +71,8 @@ static int bcm63xx_wdt_stop(struct watchdog_device *wdd)
unsigned long flags;
raw_spin_lock_irqsave(&hw->lock, flags);
- bcm_writel(WDT_STOP_1, hw->regs + WDT_CTL_REG);
- bcm_writel(WDT_STOP_2, hw->regs + WDT_CTL_REG);
+ __raw_writel(WDT_STOP_1, hw->regs + WDT_CTL_REG);
+ __raw_writel(WDT_STOP_2, hw->regs + WDT_CTL_REG);
hw->running = false;
raw_spin_unlock_irqrestore(&hw->lock, flags);
return 0;
@@ -108,10 +107,10 @@ static void bcm63xx_wdt_isr(void *data)
raw_spin_lock_irqsave(&hw->lock, flags);
if (!hw->running) {
/* Stop the watchdog as it shouldn't be running */
- bcm_writel(WDT_STOP_1, hw->regs + WDT_CTL_REG);
- bcm_writel(WDT_STOP_2, hw->regs + WDT_CTL_REG);
+ __raw_writel(WDT_STOP_1, hw->regs + WDT_CTL_REG);
+ __raw_writel(WDT_STOP_2, hw->regs + WDT_CTL_REG);
} else {
- u32 timeleft = bcm_readl(hw->regs + WDT_CTL_REG);
+ u32 timeleft = __raw_readl(hw->regs + WDT_CTL_REG);
u32 ms;
if (timeleft >= 2) {
@@ -125,9 +124,9 @@ static void bcm63xx_wdt_isr(void *data)
* This is done with a lock held in case userspace is
* trying to restart the watchdog on another CPU.
*/
- bcm_writel(timeleft, hw->regs + WDT_DEFVAL_REG);
- bcm_writel(WDT_START_1, hw->regs + WDT_CTL_REG);
- bcm_writel(WDT_START_2, hw->regs + WDT_CTL_REG);
+ __raw_writel(timeleft, hw->regs + WDT_DEFVAL_REG);
+ __raw_writel(WDT_START_1, hw->regs + WDT_CTL_REG);
+ __raw_writel(WDT_START_2, hw->regs + WDT_CTL_REG);
} else {
/* The watchdog cannot be started with a time of less
* than 2 ticks (it won't fire).
diff --git a/include/linux/bcm63xx_wdt.h b/include/linux/bcm63xx_wdt.h
new file mode 100644
index 0000000..2e9210b
--- /dev/null
+++ b/include/linux/bcm63xx_wdt.h
@@ -0,0 +1,22 @@
+#ifndef LINUX_BCM63XX_WDT_H_
+#define LINUX_BCM63XX_WDT_H_
+
+/* Watchdog default count register */
+#define WDT_DEFVAL_REG 0x0
+
+/* Watchdog control register */
+#define WDT_CTL_REG 0x4
+
+/* Watchdog control register constants */
+#define WDT_START_1 (0xff00)
+#define WDT_START_2 (0x00ff)
+#define WDT_STOP_1 (0xee00)
+#define WDT_STOP_2 (0x00ee)
+
+/* Watchdog reset length register */
+#define WDT_RSTLEN_REG 0x8
+
+/* Watchdog soft reset register (BCM6328 only) */
+#define WDT_SOFTRESET_REG 0xc
+
+#endif
--
2.1.4
--
Simon Arlott
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists