linux-kernel - [PATCH v3 19/19] irqchip/mips-gic: Add new DT property to reserve IPIs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1449058920-21011-20-git-send-email-qais.yousef@imgtec.com>
Date:	Wed, 2 Dec 2015 12:22:00 +0000
From:	Qais Yousef <qais.yousef@...tec.com>
To:	<linux-kernel@...r.kernel.org>
CC:	<tglx@...utronix.de>, <jason@...edaemon.net>,
	<marc.zyngier@....com>, <jiang.liu@...ux.intel.com>,
	<ralf@...ux-mips.org>, <linux-mips@...ux-mips.org>,
	Qais Yousef <qais.yousef@...tec.com>
Subject: [PATCH v3 19/19] irqchip/mips-gic: Add new DT property to reserve IPIs

The new property will allow to specify the range of GIC hwirqs to use for IPIs.

This is an optinal property. We preserve the previous behaviour of allocating
the last 2 * gic_vpes if it's not specified or DT is not supported.

Signed-off-by: Qais Yousef <qais.yousef@...tec.com>
Acked-by: Rob Herring <robh@...nel.org>
---
 .../devicetree/bindings/interrupt-controller/mips-gic.txt    |  7 +++++++
 drivers/irqchip/irq-mips-gic.c                               | 12 ++++++++++--
 2 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
index aae4c384ee1f..173595305e26 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
@@ -23,6 +23,12 @@ Optional properties:
 - mti,reserved-cpu-vectors : Specifies the list of CPU interrupt vectors
   to which the GIC may not route interrupts.  Valid values are 2 - 7.
   This property is ignored if the CPU is started in EIC mode.
+- mti,reserved-ipi-vectors : Specifies the range of GIC interrupts that are
+  reserved for IPIs.
+  It accepts 2 values, the 1st is the starting interrupt and the 2nd is the size
+  of the reserved range.
+  If not specified, the driver will allocate the last 2 * number of VPEs in the
+  system.
 
 Required properties for timer sub-node:
 - compatible : Should be "mti,gic-timer".
@@ -44,6 +50,7 @@ Example:
 		#interrupt-cells = <3>;
 
 		mti,reserved-cpu-vectors = <7>;
+		mti,reserved-ipi-vectors = <40 8>;
 
 		timer {
 			compatible = "mti,gic-timer";
diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c
index 77200da9d8d3..055aa513295c 100644
--- a/drivers/irqchip/irq-mips-gic.c
+++ b/drivers/irqchip/irq-mips-gic.c
@@ -944,6 +944,7 @@ static void __init __gic_init(unsigned long gic_base_addr,
 			      struct device_node *node)
 {
 	unsigned int gicconfig;
+	unsigned int v[2];
 
 	gic_base = ioremap_nocache(gic_base_addr, gic_addrspace_size);
 
@@ -1012,8 +1013,15 @@ static void __init __gic_init(unsigned long gic_base_addr,
 
 	gic_ipi_domain->bus_token = DOMAIN_BUS_IPI;
 
-	/* Make the last 2 * NR_CPUS available for IPIs */
-	bitmap_set(ipi_resrv, gic_shared_intrs - 2 * gic_vpes, 2 * gic_vpes);
+	if (node &&
+	    !of_property_read_u32_array(node, "mti,reserved-ipi-vectors", v, 2)) {
+		bitmap_set(ipi_resrv, v[0], v[1]);
+	} else {
+		/* Make the last 2 * gic_vpes available for IPIs */
+		bitmap_set(ipi_resrv,
+			   gic_shared_intrs - 2 * gic_vpes,
+			   2 * gic_vpes);
+	}
 
 	gic_basic_init();
 }
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/