| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <565F0C50.2090502@redhat.com>
Date: Wed, 2 Dec 2015 16:20:48 +0100
From: Hans de Goede <hdegoede@...hat.com>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>,
linux-input@...r.kernel.org
Cc: Benjamin Tissoires <benjamin.tissoires@...hat.com>,
Thomas Hellstrom <thellstrom@...are.com>, pali.rohar@...il.com,
jckeerthan@...il.com, till2.schaefer@...-dortmund.de,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 5/6] Input: psmouse - factor out common protocol probing
code
Hi,
Thanks for splitting out the series, patches 1 - 4 look good to me and are:
Reviewed-by: Hans de Goede <hdegoede@...hat.com>
I've some comments inline for this one.
On 29-11-15 06:13, Dmitry Torokhov wrote:
> In preparation of limiting protocols that we try on pass-through ports,
> let's rework initialization code and factor common code into
> psmouse_try_protocol() that accepts protocol type (instead of detec()
> function pointer) and can, for most protocols, perform both detection and
> initialization.
>
> Note that this removes option of forcing Lifebook protocol on devices that
> are not recognized by lifebook_detect() as having the hardware, but I do
> not recall anyone using this option.
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@...il.com>
> ---
> drivers/input/mouse/psmouse-base.c | 159 +++++++++++++++++++------------------
> 1 file changed, 82 insertions(+), 77 deletions(-)
>
> diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
> index b92c1bd..ee59b0e 100644
> --- a/drivers/input/mouse/psmouse-base.c
> +++ b/drivers/input/mouse/psmouse-base.c
> @@ -767,6 +767,7 @@ static const struct psmouse_protocol psmouse_protocols[] = {
> .type = PSMOUSE_LIFEBOOK,
> .name = "LBPS/2",
> .alias = "lifebook",
> + .detect = lifebook_detect,
> .init = lifebook_init,
> },
> #endif
> @@ -844,7 +845,7 @@ static const struct psmouse_protocol psmouse_protocols[] = {
> },
> };
>
> -static const struct psmouse_protocol *psmouse_protocol_by_type(enum psmouse_type type)
> +static const struct psmouse_protocol *__psmouse_protocol_by_type(enum psmouse_type type)
> {
> int i;
>
> @@ -852,6 +853,17 @@ static const struct psmouse_protocol *psmouse_protocol_by_type(enum psmouse_type
> if (psmouse_protocols[i].type == type)
> return &psmouse_protocols[i];
>
> + return NULL;
> +}
> +
> +static const struct psmouse_protocol *psmouse_protocol_by_type(enum psmouse_type type)
> +{
> + const struct psmouse_protocol *proto;
> +
> + proto = __psmouse_protocol_by_type(type);
> + if (proto)
> + return proto;
> +
> WARN_ON(1);
> return &psmouse_protocols[0];
> }
> @@ -910,18 +922,37 @@ static void psmouse_apply_defaults(struct psmouse *psmouse)
> psmouse->pt_deactivate = NULL;
> }
>
> -/*
> - * Apply default settings to the psmouse structure and call specified
> - * protocol detection or initialization routine.
> - */
> -static int psmouse_do_detect(int (*detect)(struct psmouse *psmouse,
> - bool set_properties),
> - struct psmouse *psmouse, bool set_properties)
> +static bool psmouse_try_protocol(struct psmouse *psmouse,
> + enum psmouse_type type,
> + unsigned int *max_proto,
> + bool set_properties, bool do_init)
> {
> + const struct psmouse_protocol *proto;
> +
> + proto = __psmouse_protocol_by_type(type);
> + if (!proto)
> + return false;
> +
> if (set_properties)
> psmouse_apply_defaults(psmouse);
>
> - return detect(psmouse, set_properties);
> + if (proto->detect(psmouse, set_properties) != 0)
> + return false;
> +
> + if (set_properties && do_init && proto->init) {
> + if (proto->init(psmouse) != 0) {
> + /*
> + * We detected device, but init failed. Adjust
> + * max_proto so we only try standard protocols.
> + */
> + if (*max_proto > PSMOUSE_IMEX)
> + *max_proto = PSMOUSE_IMEX;
> +
> + return false;
> + }
> + }
> +
> + return true;
> }
>
> /*
> @@ -937,7 +968,8 @@ static int psmouse_extensions(struct psmouse *psmouse,
> * Always check for focaltech, this is safe as it uses pnp-id
> * matching.
> */
> - if (psmouse_do_detect(focaltech_detect, psmouse, set_properties) == 0) {
> + if (psmouse_try_protocol(psmouse, PSMOUSE_FOCALTECH,
> + &max_proto, set_properties, false)) {
> if (max_proto > PSMOUSE_IMEX) {
> if (IS_ENABLED(CONFIG_MOUSE_PS2_FOCALTECH) &&
> (!set_properties || focaltech_init(psmouse) == 0)) {
> @@ -959,26 +991,21 @@ static int psmouse_extensions(struct psmouse *psmouse,
> * We always check for LifeBook because it does not disturb mouse
> * (it only checks DMI information).
> */
> - if (psmouse_do_detect(lifebook_detect, psmouse, set_properties) == 0) {
> - if (max_proto > PSMOUSE_IMEX) {
> - if (!set_properties || lifebook_init(psmouse) == 0)
> - return PSMOUSE_LIFEBOOK;
> - }
> - }
> + if (psmouse_try_protocol(psmouse, PSMOUSE_LIFEBOOK, &max_proto,
> + set_properties, max_proto > PSMOUSE_IMEX))
> + return PSMOUSE_LIFEBOOK;
>
> - if (psmouse_do_detect(vmmouse_detect, psmouse, set_properties) == 0) {
> - if (max_proto > PSMOUSE_IMEX) {
> - if (!set_properties || vmmouse_init(psmouse) == 0)
> - return PSMOUSE_VMMOUSE;
> - }
> - }
> + if (psmouse_try_protocol(psmouse, PSMOUSE_VMMOUSE, &max_proto,
> + set_properties, max_proto > PSMOUSE_IMEX))
> + return PSMOUSE_VMMOUSE;
>
> /*
> * Try Kensington ThinkingMouse (we try first, because Synaptics
> * probe upsets the ThinkingMouse).
> */
> if (max_proto > PSMOUSE_IMEX &&
> - psmouse_do_detect(thinking_detect, psmouse, set_properties) == 0) {
> + psmouse_try_protocol(psmouse, PSMOUSE_THINKPS, &max_proto,
> + set_properties, true)) {
> return PSMOUSE_THINKPS;
> }
>
> @@ -989,7 +1016,8 @@ static int psmouse_extensions(struct psmouse *psmouse,
> * probing for IntelliMouse.
> */
> if (max_proto > PSMOUSE_PS2 &&
> - psmouse_do_detect(synaptics_detect, psmouse, set_properties) == 0) {
> + psmouse_try_protocol(psmouse, PSMOUSE_SYNAPTICS, &max_proto,
> + set_properties, false)) {
> synaptics_hardware = true;
>
> if (max_proto > PSMOUSE_IMEX) {
> @@ -1025,68 +1053,48 @@ static int psmouse_extensions(struct psmouse *psmouse,
> * Trackpads.
> */
> if (max_proto > PSMOUSE_IMEX &&
> - cypress_detect(psmouse, set_properties) == 0) {
> - if (IS_ENABLED(CONFIG_MOUSE_PS2_CYPRESS)) {
> - if (cypress_init(psmouse) == 0)
> - return PSMOUSE_CYPRESS;
> -
> - /*
> - * Finger Sensing Pad probe upsets some modules of
> - * Cypress Trackpad, must avoid Finger Sensing Pad
> - * probe if Cypress Trackpad device detected.
> - */
> - return PSMOUSE_PS2;
> - }
> -
> - max_proto = PSMOUSE_IMEX;
> + psmouse_try_protocol(psmouse, PSMOUSE_CYPRESS, &max_proto,
> + set_properties, true)) {
> + return PSMOUSE_CYPRESS;
> }
The protocols array has the CYPRESS entry wrapped in "#ifdef CONFIG_MOUSE_PS2_CYPRESS"
so this bit of the patches changes behavior of the probe order if
CONFIG_MOUSE_PS2_CYPRESS is not enabled. Before this patch the max_proto would
get limited to PSMOUSE_IMEX, but now the:
proto = __psmouse_protocol_by_type(type);
if (!proto)
return false;
Part of psmouse_try_protocol will trigger and then max_proto will stay unmodified.
I think this can best be fixed by always including CYPRESS in the proto array,
and have init be a stub which always fails when CYPRESS is not actually enabled.
> /* Try ALPS TouchPad */
> if (max_proto > PSMOUSE_IMEX) {
> ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
> - if (psmouse_do_detect(alps_detect,
> - psmouse, set_properties) == 0) {
> - if (!set_properties || alps_init(psmouse) == 0)
> - return PSMOUSE_ALPS;
> -
> - /* Init failed, try basic relative protocols */
> - max_proto = PSMOUSE_IMEX;
> - }
> + if (psmouse_try_protocol(psmouse, PSMOUSE_ALPS,
> + &max_proto, set_properties, true))
> + return PSMOUSE_ALPS;
> }
>
> /* Try OLPC HGPK touchpad */
> if (max_proto > PSMOUSE_IMEX &&
> - psmouse_do_detect(hgpk_detect, psmouse, set_properties) == 0) {
> - if (!set_properties || hgpk_init(psmouse) == 0)
> - return PSMOUSE_HGPK;
> - /* Init failed, try basic relative protocols */
> - max_proto = PSMOUSE_IMEX;
> + psmouse_try_protocol(psmouse, PSMOUSE_HGPK, &max_proto,
> + set_properties, true)) {
> + return PSMOUSE_HGPK;
> }
>
> /* Try Elantech touchpad */
> if (max_proto > PSMOUSE_IMEX &&
> - psmouse_do_detect(elantech_detect, psmouse, set_properties) == 0) {
> - if (!set_properties || elantech_init(psmouse) == 0)
> - return PSMOUSE_ELANTECH;
> - /* Init failed, try basic relative protocols */
> - max_proto = PSMOUSE_IMEX;
> + psmouse_try_protocol(psmouse, PSMOUSE_ELANTECH,
> + &max_proto, set_properties, true)) {
> + return PSMOUSE_ELANTECH;
> }
>
> if (max_proto > PSMOUSE_IMEX) {
> - if (psmouse_do_detect(genius_detect,
> - psmouse, set_properties) == 0)
> + if (psmouse_try_protocol(psmouse, PSMOUSE_GENPS,
> + &max_proto, set_properties, true))
> return PSMOUSE_GENPS;
>
> - if (psmouse_do_detect(ps2pp_init,
> - psmouse, set_properties) == 0)
> + if (psmouse_try_protocol(psmouse, PSMOUSE_PS2PP,
> + &max_proto, set_properties, true))
> return PSMOUSE_PS2PP;
The PS2PP entry in the protocols table has an init function, by passing
in true here you are causing this to get called, where as it was not
being called before.
>
> - if (psmouse_do_detect(trackpoint_detect,
> - psmouse, set_properties) == 0)
> + if (psmouse_try_protocol(psmouse, PSMOUSE_TRACKPOINT,
> + &max_proto, set_properties, true))
> return PSMOUSE_TRACKPOINT;
>
> - if (psmouse_do_detect(touchkit_ps2_detect,
> - psmouse, set_properties) == 0)
> + if (psmouse_try_protocol(psmouse, PSMOUSE_TOUCHKIT_PS2,
> + &max_proto, set_properties, true))
> return PSMOUSE_TOUCHKIT_PS2;
> }
>
> @@ -1094,14 +1102,10 @@ static int psmouse_extensions(struct psmouse *psmouse,
> * Try Finger Sensing Pad. We do it here because its probe upsets
> * Trackpoint devices (causing TP_READ_ID command to time out).
> */
> - if (max_proto > PSMOUSE_IMEX) {
> - if (psmouse_do_detect(fsp_detect,
> - psmouse, set_properties) == 0) {
> - if (!set_properties || fsp_init(psmouse) == 0)
> - return PSMOUSE_FSP;
> - /* Init failed, try basic relative protocols */
> - max_proto = PSMOUSE_IMEX;
> - }
> + if (max_proto > PSMOUSE_IMEX &&
> + psmouse_try_protocol(psmouse, PSMOUSE_FSP,
> + &max_proto, set_properties, true)) {
> + return PSMOUSE_FSP;
> }
>
> /*
> @@ -1113,14 +1117,14 @@ static int psmouse_extensions(struct psmouse *psmouse,
> psmouse_reset(psmouse);
>
> if (max_proto >= PSMOUSE_IMEX &&
> - psmouse_do_detect(im_explorer_detect,
> - psmouse, set_properties) == 0) {
> + psmouse_try_protocol(psmouse, PSMOUSE_IMEX,
> + &max_proto, set_properties, true)) {
> return PSMOUSE_IMEX;
> }
>
> if (max_proto >= PSMOUSE_IMPS &&
> - psmouse_do_detect(intellimouse_detect,
> - psmouse, set_properties) == 0) {
> + psmouse_try_protocol(psmouse, PSMOUSE_IMPS,
> + &max_proto, set_properties, true)) {
> return PSMOUSE_IMPS;
> }
>
> @@ -1128,7 +1132,8 @@ static int psmouse_extensions(struct psmouse *psmouse,
> * Okay, all failed, we have a standard mouse here. The number of
> * the buttons is still a question, though. We assume 3.
> */
> - psmouse_do_detect(ps2bare_detect, psmouse, set_properties);
> + psmouse_try_protocol(psmouse, PSMOUSE_PS2,
> + &max_proto, set_properties, true);
>
> if (synaptics_hardware) {
> /*
>
Regards,
Hans
p.s.
After this change, a whole lot of the code has the form of:
if (max_proto >= PSMOUSE_FOO &&
psmouse_try_protocol(psmouse, ...)) {
return PSMOUSE_BAR;
}
Maybe you can do a follow-up which makes PSMOUSE_FOO a parameter to
psmouse_try_protocol and move the test into psmouse_try_protocol?
Also you may want to consider to drop the {} around the single return
statement most of this code-blocks now have. Maybe best to do
this in a followup patch to keep the diff readable.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists