linux-kernel - [net-next v5 4/8] dpaa_eth: add driver's Tx queue selection

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1449150589-26253-5-git-send-email-madalin.bucur@freescale.com>
Date:	Thu, 3 Dec 2015 15:49:45 +0200
From:	Madalin Bucur <madalin.bucur@...escale.com>
To:	<netdev@...r.kernel.org>
CC:	<linuxppc-dev@...ts.ozlabs.org>, <linux-kernel@...r.kernel.org>,
	<davem@...emloft.net>, <scottwood@...escale.com>,
	<igal.liberman@...escale.com>, <ppc@...dchasers.com>,
	<joe@...ches.com>, <pebolle@...cali.nl>,
	<joakim.tjernlund@...nsmode.se>, <gregkh@...uxfoundation.org>,
	Madalin Bucur <madalin.bucur@...escale.com>
Subject: [net-next v5 4/8] dpaa_eth: add driver's Tx queue selection

Allow the selection of the transmission queue based on the CPU id.
The DPAA Ethernet driver defines a ndo_select_queue() callback for
optimal selection of the egress FQ. That will override the XPS support
for this netdevice and should provide a certain increase in performance.
Standard XPS support is available by deselecting the introduced kconfig
option.

Signed-off-by: Madalin Bucur <madalin.bucur@...escale.com>
---
 drivers/net/ethernet/freescale/dpaa/Kconfig           | 10 ++++++++++
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c        |  3 +++
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.h        |  6 ++++++
 drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c |  8 ++++++++
 drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h |  4 ++++
 5 files changed, 31 insertions(+)

diff --git a/drivers/net/ethernet/freescale/dpaa/Kconfig b/drivers/net/ethernet/freescale/dpaa/Kconfig
index 022d5aa..2577aac 100644
--- a/drivers/net/ethernet/freescale/dpaa/Kconfig
+++ b/drivers/net/ethernet/freescale/dpaa/Kconfig
@@ -11,6 +11,16 @@ menuconfig FSL_DPAA_ETH
 
 if FSL_DPAA_ETH
 
+config FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
+	bool "Use driver's Tx queue selection mechanism"
+	default y
+	---help---
+	  The DPAA Ethernet driver defines a ndo_select_queue() callback for optimal selection
+	  of the egress FQ. That will override the XPS support for this netdevice.
+	  If for whatever reason you want to be in control of the egress FQ-to-CPU selection and mapping,
+	  or simply don't want to use the driver's ndo_select_queue() callback, then unselect this
+	  and use the standard XPS support instead.
+
 config FSL_DPAA_ETH_FRIENDLY_IF_NAME
 	bool "Use fmX-macY names for the DPAA interfaces"
 	default y
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 67f89ab..6c16ddd 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -375,6 +375,9 @@ static struct net_device_ops dpaa_ops = {
 	.ndo_get_stats64 = dpa_get_stats64,
 	.ndo_set_mac_address = dpa_set_mac_address,
 	.ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
+	.ndo_select_queue = dpa_select_queue,
+#endif
 	.ndo_change_mtu = dpa_change_mtu,
 	.ndo_set_rx_mode = dpa_set_rx_mode,
 	.ndo_init = dpa_ndo_init,
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
index 45dc62d..a990c7b 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -405,9 +405,15 @@ static inline void _dpa_assign_wq(struct dpa_fq *fq)
 	}
 }
 
+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
+/* Use in lieu of skb_get_queue_mapping() */
+#define dpa_get_queue_mapping(skb) \
+	raw_smp_processor_id()
+#else
 /* Use the queue selected by XPS */
 #define dpa_get_queue_mapping(skb) \
 	skb_get_queue_mapping(skb)
+#endif
 
 static inline void dpa_bp_free_pf(void *addr)
 {
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
index 1c82338..59a1920 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
@@ -619,6 +619,14 @@ bool dpa_bpid2pool_use(int bpid)
 	return false;
 }
 
+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
+u16 dpa_select_queue(struct net_device *net_dev, struct sk_buff *skb,
+		     void *accel_priv, select_queue_fallback_t fallback)
+{
+	return dpa_get_queue_mapping(skb);
+}
+#endif
+
 struct dpa_fq *dpa_fq_alloc(struct device *dev,
 			    const struct fqid_cell *fqids,
 			    struct list_head *list,
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
index c3443e6..20facd1 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
@@ -69,6 +69,10 @@ struct dpa_bp *dpa_bpid2pool(int bpid);
 void dpa_bpid2pool_map(int bpid, struct dpa_bp *dpa_bp);
 bool dpa_bpid2pool_use(int bpid);
 void dpa_bp_drain(struct dpa_bp *bp);
+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
+u16 dpa_select_queue(struct net_device *net_dev, struct sk_buff *skb,
+		     void *accel_priv, select_queue_fallback_t fallback);
+#endif
 struct dpa_fq *dpa_fq_alloc(struct device *dev,
 			    const struct fqid_cell *fqids,
 			    struct list_head *list,
-- 
1.7.11.7

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/