| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20151204155509.GA27455@rob-hp-laptop>
Date: Fri, 4 Dec 2015 09:55:09 -0600
From: Rob Herring <robh@...nel.org>
To: Krzysztof Kozlowski <k.kozlowski@...sung.com>
Cc: Sangbeom Kim <sbkim73@...sung.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Lee Jones <lee.jones@...aro.org>,
Kukjin Kim <kgene@...nel.org>, linux-kernel@...r.kernel.org,
linux-samsung-soc@...r.kernel.org, devicetree@...r.kernel.org,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>, linux-clk@...r.kernel.org
Subject: Re: [PATCH 3/3] dt-bindings: regulator/mfd: Reorganize S2MPA01
bindings
On Fri, Dec 04, 2015 at 10:10:05AM +0900, Krzysztof Kozlowski wrote:
> The mfd/s2mpa01.txt duplicates some of the information about bindings
> with old mfd/s2mps11.txt. Now common part exists entirely in
> mfd/samsung,sec-core.txt so:
> - add company prefix to file name (regulator/samsung,s2mpa01.txt),
> - remove duplicated information,
> - reorganize the contents to match style of
> regulator/samsung,s2mps11.txt.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
Next time, use git format-patch -M option.
Acked-by: Rob Herring <robh@...nel.org>
> ---
> Documentation/devicetree/bindings/mfd/s2mpa01.txt | 90 ----------------------
> .../devicetree/bindings/mfd/samsung,sec-core.txt | 4 +-
> .../bindings/regulator/samsung,s2mpa01.txt | 79 +++++++++++++++++++
> 3 files changed, 82 insertions(+), 91 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/mfd/s2mpa01.txt
> create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/s2mpa01.txt b/Documentation/devicetree/bindings/mfd/s2mpa01.txt
> deleted file mode 100644
> index c13d3d8c3947..000000000000
> --- a/Documentation/devicetree/bindings/mfd/s2mpa01.txt
> +++ /dev/null
> @@ -1,90 +0,0 @@
> -
> -* Samsung S2MPA01 Voltage and Current Regulator
> -
> -The Samsung S2MPA01 is a multi-function device which includes high
> -efficiency buck converters including Dual-Phase buck converter, various LDOs,
> -and an RTC. It is interfaced to the host controller using an I2C interface.
> -Each sub-block is addressed by the host system using different I2C slave
> -addresses.
> -
> -Required properties:
> -- compatible: Should be "samsung,s2mpa01-pmic".
> -- reg: Specifies the I2C slave address of the PMIC block. It should be 0x66.
> -
> -Optional properties:
> -- interrupt-parent: Specifies the phandle of the interrupt controller to which
> - the interrupts from s2mpa01 are delivered to.
> -- interrupts: An interrupt specifier for the sole interrupt generated by the
> - device.
> -
> -Optional nodes:
> -- regulators: The regulators of s2mpa01 that have to be instantiated should be
> - included in a sub-node named 'regulators'. Regulator nodes and constraints
> - included in this sub-node use the standard regulator bindings which are
> - documented elsewhere.
> -
> -Properties for BUCK regulator nodes:
> -- regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
> - (default), 25000, or 50000. May be 0 for disabling the ramp delay on
> - BUCK{1,2,3,4}.
> -
> - In the absence of the regulator-ramp-delay property, the default ramp
> - delay will be used.
> -
> - NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
> - for a particular group of BUCKs. So provide same regulator-ramp-delay=<value>.
> -
> - The following BUCKs share ramp settings:
> - * 1 and 6
> - * 2 and 4
> - * 8, 9, and 10
> -
> -The following are the names of the regulators that the s2mpa01 PMIC block
> -supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
> -as per the datasheet of s2mpa01.
> -
> - - LDOn
> - - valid values for n are 1 to 26
> - - Example: LDO1, LD02, LDO26
> - - BUCKn
> - - valid values for n are 1 to 10.
> - - Example: BUCK1, BUCK2, BUCK9
> -
> -Example:
> -
> - s2mpa01_pmic@66 {
> - compatible = "samsung,s2mpa01-pmic";
> - reg = <0x66>;
> -
> - regulators {
> - ldo1_reg: LDO1 {
> - regulator-name = "VDD_ALIVE";
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - };
> -
> - ldo2_reg: LDO2 {
> - regulator-name = "VDDQ_MMC2";
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <2800000>;
> - regulator-always-on;
> - };
> -
> - buck1_reg: BUCK1 {
> - regulator-name = "vdd_mif";
> - regulator-min-microvolt = <950000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - buck2_reg: BUCK2 {
> - regulator-name = "vdd_arm";
> - regulator-min-microvolt = <950000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-ramp-delay = <50000>;
> - };
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
> index 4aeb95c82304..cdd079bfc287 100644
> --- a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
> +++ b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
> @@ -4,7 +4,7 @@ Binding for Samsung S2M and S5M family multi-function device
> This is a part of device tree bindings for S2M and S5M family multi-function
> devices.
>
> -The Samsung S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family
> +The Samsung S2MPA01, S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family
> of multi-function devices which include voltage and current regulators, RTC,
> charger controller, clock outputs and other sub-blocks. It is interfaced
> to the host controller using an I2C interface. Each sub-block is usually
> @@ -13,6 +13,7 @@ addressed by the host system using different I2C slave addresses.
>
> This document describes bindings for main device node. Optional sub-blocks
> must be a sub-nodes to it. Bindings for them can be found in:
> + - bindings/regulator/samsung,s2mpa01.txt
> - bindings/regulator/samsung,s2mps11.txt
> - bindings/regulator/samsung,s5m8767.txt
> - bindings/clock/samsung,s2mps11.txt
> @@ -20,6 +21,7 @@ must be a sub-nodes to it. Bindings for them can be found in:
>
> Required properties:
> - compatible: Should be one of the following
> + - "samsung,s2mpa01-pmic",
> - "samsung,s2mps11-pmic",
> - "samsung,s2mps13-pmic",
> - "samsung,s2mps14-pmic",
> diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt
> new file mode 100644
> index 000000000000..bae3c7f838cf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt
> @@ -0,0 +1,79 @@
> +Binding for Samsung S2MPA01 regulator block
> +===========================================
> +
> +This is a part of device tree bindings for S2M family multi-function devices.
> +More information can be found in bindings/mfd/sec-core.txt file.
> +
> +The S2MPA01 device provide buck and LDO regulators.
> +
> +To register these with regulator framework instantiate under main device node
> +a sub-node named "regulators" with more sub-nodes for each regulator using the
> +common regulator binding documented in:
> + - Documentation/devicetree/bindings/regulator/regulator.txt
> +
> +
> +Names of regulators supported by S2MPA01 device:
> + - LDOn
> + - valid values for n are 1 to 26
> + - Example: LDO1, LD02, LDO26
> + - BUCKn
> + - valid values for n are 1 to 10.
> + - Example: BUCK1, BUCK2, BUCK9
> +Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
> +as per the datasheet of device.
> +
> +
> +Optional properties of buck regulator nodes under "regulators" sub-node:
> + - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
> + (default), 25000, or 50000. May be 0 for disabling the ramp delay on
> + BUCK{1,2,3,4}.
> +
> + In the absence of the regulator-ramp-delay property, the default ramp
> + delay will be used.
> +
> + Note: Some bucks share the ramp rate setting i.e. same ramp value
> + will be set for a particular group of bucks so provide the same
> + regulator-ramp-delay value for them.
> + Groups sharing ramp rate:
> + - buck{1,6},
> + - buck{2,4},
> + - buck{8,9,10}.
> +
> +Example:
> +
> + s2mpa01_pmic@66 {
> + compatible = "samsung,s2mpa01-pmic";
> + reg = <0x66>;
> +
> + regulators {
> + ldo1_reg: LDO1 {
> + regulator-name = "VDD_ALIVE";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + ldo2_reg: LDO2 {
> + regulator-name = "VDDQ_MMC2";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + };
> +
> + buck1_reg: BUCK1 {
> + regulator-name = "vdd_mif";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "vdd_arm";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-ramp-delay = <50000>;
> + };
> + };
> + };
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists