| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 5 Dec 2015 21:16:43 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>,
Emilio Lopez <emilio@...pez.com.ar>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>
Cc: Chen-Yu Tsai <wens@...e.org>, linux-clk@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: [PATCH resend 2/6] clk: sunxi: Add VE (Video Engine) module clock driver for sun[457]i
The video engine has its own special module clock, consisting of a clock
gate, configurable dividers, and a reset control.
On later (sun[68]i) families, the reset control is moved out of this
piece of hardware and grouped with reset controls of other peripherals.
Signed-off-by: Chen-Yu Tsai <wens@...e.org>
---
Documentation/devicetree/bindings/clock/sunxi.txt | 4 +
drivers/clk/sunxi/Makefile | 1 +
drivers/clk/sunxi/clk-a10-ve.c | 171 ++++++++++++++++++++++
3 files changed, 176 insertions(+)
create mode 100644 drivers/clk/sunxi/clk-a10-ve.c
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index ef0b452806b1..14496056319f 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -74,6 +74,7 @@ Required properties:
"allwinner,sun8i-h3-usb-clk" - for usb gates + resets on H3
"allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
"allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
+ "allwinner,sun4i-a10-ve-clk" - for the Video Engine clock
Required properties for all clocks:
- reg : shall be the control register address for the clock.
@@ -93,6 +94,9 @@ Required properties for all clocks:
And "allwinner,*-usb-clk" clocks also require:
- reset-cells : shall be set to 1
+The "allwinner,sun4i-a10-ve-clk" clock also requires:
+- reset-cells : shall be set to 0
+
The "allwinner,sun9i-a80-mmc-config-clk" clock also requires:
- #reset-cells : shall be set to 1
- resets : shall be the reset control phandle for the mmc block.
diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
index 103efab05ca8..78db91ad5af6 100644
--- a/drivers/clk/sunxi/Makefile
+++ b/drivers/clk/sunxi/Makefile
@@ -7,6 +7,7 @@ obj-y += clk-a10-codec.o
obj-y += clk-a10-hosc.o
obj-y += clk-a10-mod1.o
obj-y += clk-a10-pll2.o
+obj-y += clk-a10-ve.o
obj-y += clk-a20-gmac.o
obj-y += clk-mod0.o
obj-y += clk-simple-gates.o
diff --git a/drivers/clk/sunxi/clk-a10-ve.c b/drivers/clk/sunxi/clk-a10-ve.c
new file mode 100644
index 000000000000..de0fdb656150
--- /dev/null
+++ b/drivers/clk/sunxi/clk-a10-ve.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@...e.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+static DEFINE_SPINLOCK(ve_lock);
+
+#define SUN4I_VE_ENABLE 31
+#define SUN4I_VE_DIVIDER_SHIFT 16
+#define SUN4I_VE_DIVIDER_WIDTH 3
+#define SUN4I_VE_RESET 0
+
+/**
+ * sunxi_ve_reset... - reset bit in ve clk registers handling
+ */
+
+struct ve_reset_data {
+ void __iomem *reg;
+ spinlock_t *lock;
+ struct reset_controller_dev rcdev;
+};
+
+static int sunxi_ve_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct ve_reset_data *data = container_of(rcdev,
+ struct ve_reset_data,
+ rcdev);
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(data->lock, flags);
+
+ reg = readl(data->reg);
+ writel(reg & ~BIT(SUN4I_VE_RESET), data->reg);
+
+ spin_unlock_irqrestore(data->lock, flags);
+
+ return 0;
+}
+
+static int sunxi_ve_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct ve_reset_data *data = container_of(rcdev,
+ struct ve_reset_data,
+ rcdev);
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(data->lock, flags);
+
+ reg = readl(data->reg);
+ writel(reg | BIT(SUN4I_VE_RESET), data->reg);
+
+ spin_unlock_irqrestore(data->lock, flags);
+
+ return 0;
+}
+
+static int sunxi_ve_of_xlate(struct reset_controller_dev *rcdev,
+ const struct of_phandle_args *reset_spec)
+{
+ if (WARN_ON(reset_spec->args_count != 0))
+ return -EINVAL;
+
+ return 0;
+}
+
+static struct reset_control_ops sunxi_ve_reset_ops = {
+ .assert = sunxi_ve_reset_assert,
+ .deassert = sunxi_ve_reset_deassert,
+};
+
+static void __init sun4i_ve_clk_setup(struct device_node *node)
+{
+ struct clk *clk;
+ struct clk_divider *div;
+ struct clk_gate *gate;
+ struct ve_reset_data *reset_data;
+ const char *parent;
+ const char *clk_name = node->name;
+ void __iomem *reg;
+ int err;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg))
+ return;
+
+ div = kzalloc(sizeof(*div), GFP_KERNEL);
+ if (!div)
+ goto err_unmap;
+
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate)
+ goto err_free_div;
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+ parent = of_clk_get_parent_name(node, 0);
+
+ gate->reg = reg;
+ gate->bit_idx = SUN4I_VE_ENABLE;
+ gate->lock = &ve_lock;
+
+ div->reg = reg;
+ div->shift = SUN4I_VE_DIVIDER_SHIFT;
+ div->width = SUN4I_VE_DIVIDER_WIDTH;
+ div->lock = &ve_lock;
+
+ clk = clk_register_composite(NULL, clk_name, &parent, 1,
+ NULL, NULL,
+ &div->hw, &clk_divider_ops,
+ &gate->hw, &clk_gate_ops,
+ CLK_SET_RATE_PARENT);
+ if (IS_ERR(clk))
+ goto err_free_gate;
+
+ err = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ if (err)
+ goto err_unregister_clk;
+
+ reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL);
+ if (!reset_data)
+ goto err_del_provider;
+
+ reset_data->reg = reg;
+ reset_data->lock = &ve_lock;
+ reset_data->rcdev.nr_resets = 1;
+ reset_data->rcdev.ops = &sunxi_ve_reset_ops;
+ reset_data->rcdev.of_node = node;
+ reset_data->rcdev.of_xlate = sunxi_ve_of_xlate;
+ reset_data->rcdev.of_reset_n_cells = 0;
+ err = reset_controller_register(&reset_data->rcdev);
+ if (err)
+ goto err_free_reset;
+
+ return;
+
+err_free_reset:
+ kfree(reset_data);
+err_del_provider:
+ of_clk_del_provider(node);
+err_unregister_clk:
+ clk_unregister(clk);
+err_free_gate:
+ kfree(gate);
+err_free_div:
+ kfree(div);
+err_unmap:
+ iounmap(reg);
+}
+CLK_OF_DECLARE(sun4i_ve, "allwinner,sun4i-a10-ve-clk",
+ sun4i_ve_clk_setup);
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists