[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <56632499.9080708@ti.com>
Date: Sat, 5 Dec 2015 11:53:29 -0600
From: "Andrew F. Davis" <afd@...com>
To: Jonathan Cameron <jic23@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald <pmeerw@...erw.net>
CC: <devicetree@...r.kernel.org>, <linux-iio@...r.kernel.org>,
<linux-api@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 1/2] Documentation: afe4404: Add DT bindings for the
AFE4404 heart monitor
On 12/05/2015 11:38 AM, Jonathan Cameron wrote:
> On 02/12/15 19:57, Andrew F. Davis wrote:
>> Add the TI afe4404 heart monitor DT bindings documentation.
>> Create health directory created under iio.
>>
>> Signed-off-by: Andrew F. Davis <afd@...com>
> One little point inline - otherwise this is straightforward and
> looks good to me.
>
> Could add cross references to the interrupt and gpio docs.
>
Will add.
> Jonathan
>> ---
>> .../devicetree/bindings/iio/health/afe4404.txt | 27 ++++++++++++++++++++++
>> 1 file changed, 27 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/iio/health/afe4404.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/health/afe4404.txt b/Documentation/devicetree/bindings/iio/health/afe4404.txt
>> new file mode 100644
>> index 0000000..25b77a4
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/health/afe4404.txt
>> @@ -0,0 +1,27 @@
>> +* Texas Instruments AFE4404 Heart rate and Pulse Oximeter
>> +
>> +Required properties:
>> + - compatible : Should be "ti,afe4404".
>> + - reg : I2C address of the device.
>> + - tx_sup-supply : Regulator supply to LEDs.
> If the sup bit is for supply I'd drop it and just have
> tx-supply.
It is, the name of the pin in the datasheet is "tx_sup", so
I went with that.
>> + - interrupt-parent : Phandle to he parent interrupt controller.
>> + - interrupts : The interrupt line the device ADC_RDY pin is connected to.
>> +
>> +Optional properties:
>> + - reset-gpios : GPIO used to reset the device.
>> +
>> +Example:
>> +
>> +&i2c2 {
>> + heart_mon@58 {
>> + compatible = "ti,afe4404";
>> + reg = <0x58>;
>> +
>> + tx_sup-supply = <&vbat>;
>> +
>> + interrupt-parent = <&gpio1>;
>> + interrupts = <28 IRQ_TYPE_EDGE_RISING>;
>> +
>> + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
>> + };
>> +};
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists