Replace {P,T,DTC}DEBUG_INIT with NDEBUG_INIT. Remove dead debugging code, including code that's conditional upon *DEBUG_TRANSFER. Signed-off-by: Finn Thain Reviewed-by: Hannes Reinecke --- drivers/scsi/dtc.c | 18 ++++++------------ drivers/scsi/dtc.h | 27 --------------------------- drivers/scsi/pas16.c | 21 +++++++-------------- drivers/scsi/pas16.h | 16 ---------------- drivers/scsi/t128.c | 18 ++++++------------ drivers/scsi/t128.h | 16 ---------------- 6 files changed, 19 insertions(+), 97 deletions(-) Index: linux/drivers/scsi/dtc.c =================================================================== --- linux.orig/drivers/scsi/dtc.c 2015-12-06 12:29:19.000000000 +1100 +++ linux/drivers/scsi/dtc.c 2015-12-06 12:29:21.000000000 +1100 @@ -205,9 +205,8 @@ static int __init dtc_detect(struct scsi addr = 0; } else for (; !addr && (current_base < NO_BASES); ++current_base) { -#if (DTCDEBUG & DTCDEBUG_INIT) - printk(KERN_DEBUG "scsi-dtc : probing address %08x\n", bases[current_base].address); -#endif + dprintk(NDEBUG_INIT, "dtc: probing address 0x%08x\n", + (unsigned int)bases[current_base].address); if (bases[current_base].noauto) continue; base = ioremap(bases[current_base].address, 0x2000); @@ -216,18 +215,14 @@ static int __init dtc_detect(struct scsi for (sig = 0; sig < NO_SIGNATURES; ++sig) { if (check_signature(base + signatures[sig].offset, signatures[sig].string, strlen(signatures[sig].string))) { addr = bases[current_base].address; -#if (DTCDEBUG & DTCDEBUG_INIT) - printk(KERN_DEBUG "scsi-dtc : detected board.\n"); -#endif + dprintk(NDEBUG_INIT, "dtc: detected board\n"); goto found; } } iounmap(base); } -#if defined(DTCDEBUG) && (DTCDEBUG & DTCDEBUG_INIT) - printk(KERN_DEBUG "scsi-dtc : base = %08x\n", addr); -#endif + dprintk(NDEBUG_INIT, "dtc: addr = 0x%08x\n", addr); if (!addr) break; @@ -271,9 +266,8 @@ found: printk(KERN_WARNING "scsi%d : interrupts not used. Might as well not jumper it.\n", instance->host_no); instance->irq = NO_IRQ; #endif -#if defined(DTCDEBUG) && (DTCDEBUG & DTCDEBUG_INIT) - printk("scsi%d : irq = %d\n", instance->host_no, instance->irq); -#endif + dprintk(NDEBUG_INIT, "scsi%d : irq = %d\n", + instance->host_no, instance->irq); ++current_override; ++count; Index: linux/drivers/scsi/dtc.h =================================================================== --- linux.orig/drivers/scsi/dtc.h 2015-12-06 12:29:18.000000000 +1100 +++ linux/drivers/scsi/dtc.h 2015-12-06 12:29:21.000000000 +1100 @@ -10,10 +10,6 @@ #ifndef DTC3280_H #define DTC3280_H -#define DTCDEBUG 0 -#define DTCDEBUG_INIT 0x1 -#define DTCDEBUG_TRANSFER 0x2 - #ifndef CMD_PER_LUN #define CMD_PER_LUN 2 #endif @@ -33,31 +29,8 @@ #define DTC_address(reg) (base + DTC_5380_OFFSET + reg) -#define dbNCR5380_read(reg) \ - (rval=readb(DTC_address(reg)), \ - (((unsigned char) printk("DTC : read register %d at addr %p is: %02x\n"\ - , (reg), DTC_address(reg), rval)), rval ) ) - -#define dbNCR5380_write(reg, value) do { \ - printk("DTC : write %02x to register %d at address %p\n", \ - (value), (reg), DTC_address(reg)); \ - writeb(value, DTC_address(reg));} while(0) - - -#if !(DTCDEBUG & DTCDEBUG_TRANSFER) #define NCR5380_read(reg) (readb(DTC_address(reg))) #define NCR5380_write(reg, value) (writeb(value, DTC_address(reg))) -#else -#define NCR5380_read(reg) (readb(DTC_address(reg))) -#define xNCR5380_read(reg) \ - (((unsigned char) printk("DTC : read register %d at address %p\n"\ - , (reg), DTC_address(reg))), readb(DTC_address(reg))) - -#define NCR5380_write(reg, value) do { \ - printk("DTC : write %02x to register %d at address %p\n", \ - (value), (reg), DTC_address(reg)); \ - writeb(value, DTC_address(reg));} while(0) -#endif #define NCR5380_intr dtc_intr #define NCR5380_queue_command dtc_queue_command Index: linux/drivers/scsi/pas16.c =================================================================== --- linux.orig/drivers/scsi/pas16.c 2015-12-06 12:29:19.000000000 +1100 +++ linux/drivers/scsi/pas16.c 2015-12-06 12:29:21.000000000 +1100 @@ -1,6 +1,5 @@ #define PSEUDO_DMA #define UNSAFE /* Not unsafe for PAS16 -- use it */ -#define PDEBUG 0 /* * This driver adapted from Drew Eckhardt's Trantor T128 driver @@ -377,23 +376,18 @@ static int __init pas16_detect(struct sc } else for (; !io_port && (current_base < NO_BASES); ++current_base) { -#if (PDEBUG & PDEBUG_INIT) - printk("scsi-pas16 : probing io_port %04x\n", (unsigned int) bases[current_base].io_port); -#endif + dprintk(NDEBUG_INIT, "pas16: probing io_port 0x%04x\n", + (unsigned int)bases[current_base].io_port); if ( !bases[current_base].noauto && pas16_hw_detect( current_base ) ){ io_port = bases[current_base].io_port; init_board( io_port, default_irqs[ current_base ], 0 ); -#if (PDEBUG & PDEBUG_INIT) - printk("scsi-pas16 : detected board.\n"); -#endif + dprintk(NDEBUG_INIT, "pas16: detected board\n"); } } - -#if defined(PDEBUG) && (PDEBUG & PDEBUG_INIT) - printk("scsi-pas16 : io_port = %04x\n", (unsigned int) io_port); -#endif + dprintk(NDEBUG_INIT, "pas16: io_port = 0x%04x\n", + (unsigned int)io_port); if (!io_port) break; @@ -431,9 +425,8 @@ static int __init pas16_detect(struct sc outb( (inb(io_port + IO_CONFIG_3) & 0x0f), io_port + IO_CONFIG_3 ); } -#if defined(PDEBUG) && (PDEBUG & PDEBUG_INIT) - printk("scsi%d : irq = %d\n", instance->host_no, instance->irq); -#endif + dprintk(NDEBUG_INIT, "scsi%d : irq = %d\n", + instance->host_no, instance->irq); ++current_override; ++count; Index: linux/drivers/scsi/pas16.h =================================================================== --- linux.orig/drivers/scsi/pas16.h 2015-12-06 12:29:18.000000000 +1100 +++ linux/drivers/scsi/pas16.h 2015-12-06 12:29:21.000000000 +1100 @@ -24,9 +24,6 @@ #ifndef PAS16_H #define PAS16_H -#define PDEBUG_INIT 0x1 -#define PDEBUG_TRANSFER 0x2 - #define PAS16_DEFAULT_BASE_1 0x388 #define PAS16_DEFAULT_BASE_2 0x384 #define PAS16_DEFAULT_BASE_3 0x38c @@ -120,21 +117,8 @@ #define PAS16_io_port(reg) ( io_port + pas16_offset[(reg)] ) -#if !(PDEBUG & PDEBUG_TRANSFER) #define NCR5380_read(reg) ( inb(PAS16_io_port(reg)) ) #define NCR5380_write(reg, value) ( outb((value),PAS16_io_port(reg)) ) -#else -#define NCR5380_read(reg) \ - (((unsigned char) printk("scsi%d : read register %d at io_port %04x\n"\ - , instance->hostno, (reg), PAS16_io_port(reg))), inb( PAS16_io_port(reg)) ) - -#define NCR5380_write(reg, value) \ - (printk("scsi%d : write %02x to register %d at io_port %04x\n", \ - instance->hostno, (value), (reg), PAS16_io_port(reg)), \ - outb( (value),PAS16_io_port(reg) ) ) - -#endif - #define NCR5380_intr pas16_intr #define do_NCR5380_intr do_pas16_intr Index: linux/drivers/scsi/t128.c =================================================================== --- linux.orig/drivers/scsi/t128.c 2015-12-06 12:29:19.000000000 +1100 +++ linux/drivers/scsi/t128.c 2015-12-06 12:29:21.000000000 +1100 @@ -182,9 +182,8 @@ static int __init t128_detect(struct scs base = 0; } else for (; !base && (current_base < NO_BASES); ++current_base) { -#if (TDEBUG & TDEBUG_INIT) - printk("scsi-t128 : probing address %08x\n", bases[current_base].address); -#endif + dprintk(NDEBUG_INIT, "t128: probing address 0x%08x\n", + bases[current_base].address); if (bases[current_base].noauto) continue; p = ioremap(bases[current_base].address, 0x2000); @@ -195,17 +194,13 @@ static int __init t128_detect(struct scs signatures[sig].string, strlen(signatures[sig].string))) { base = bases[current_base].address; -#if (TDEBUG & TDEBUG_INIT) - printk("scsi-t128 : detected board.\n"); -#endif + dprintk(NDEBUG_INIT, "t128: detected board\n"); goto found; } iounmap(p); } -#if defined(TDEBUG) && (TDEBUG & TDEBUG_INIT) - printk("scsi-t128 : base = %08x\n", (unsigned int) base); -#endif + dprintk(NDEBUG_INIT, "t128: base = 0x%08x\n", (unsigned int)base); if (!base) break; @@ -242,9 +237,8 @@ found: printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no); } -#if defined(TDEBUG) && (TDEBUG & TDEBUG_INIT) - printk("scsi%d : irq = %d\n", instance->host_no, instance->irq); -#endif + dprintk(NDEBUG_INIT, "scsi%d: irq = %d\n", + instance->host_no, instance->irq); ++current_override; ++count; Index: linux/drivers/scsi/t128.h =================================================================== --- linux.orig/drivers/scsi/t128.h 2015-12-06 12:29:18.000000000 +1100 +++ linux/drivers/scsi/t128.h 2015-12-06 12:29:21.000000000 +1100 @@ -23,10 +23,6 @@ #ifndef T128_H #define T128_H -#define TDEBUG 0 -#define TDEBUG_INIT 0x1 -#define TDEBUG_TRANSFER 0x2 - /* * The trantor boards are memory mapped. They use an NCR5380 or * equivalent (my sample board had part second sourced from ZILOG). @@ -92,20 +88,8 @@ #define T128_address(reg) (base + T_5380_OFFSET + ((reg) * 0x20)) -#if !(TDEBUG & TDEBUG_TRANSFER) #define NCR5380_read(reg) readb(T128_address(reg)) #define NCR5380_write(reg, value) writeb((value),(T128_address(reg))) -#else -#define NCR5380_read(reg) \ - (((unsigned char) printk("scsi%d : read register %d at address %08x\n"\ - , instance->hostno, (reg), T128_address(reg))), readb(T128_address(reg))) - -#define NCR5380_write(reg, value) { \ - printk("scsi%d : write %02x to register %d at address %08x\n", \ - instance->hostno, (value), (reg), T128_address(reg)); \ - writeb((value), (T128_address(reg))); \ -} -#endif #define NCR5380_intr t128_intr #define do_NCR5380_intr do_t128_intr -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/