| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20151206100412.1a74b71da8e9ca28c6e61589@free.fr>
Date: Sun, 6 Dec 2015 10:04:12 +0100
From: Jean-Francois Moine <moinejf@...e.fr>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>, Rob Herring <robh+dt@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Linus Walleij <linus.walleij@...aro.org>
Cc: devicetree@...r.kernel.org,
Vishnu Patekar <vishnupatekar0510@...il.com>,
Emilio López <emilio@...pez.com.ar>,
Reinder de Haan <patchesrdh@...as.com>,
linux-kernel@...r.kernel.org, Hans de Goede <hdegoede@...hat.com>,
linux-sunxi@...glegroups.com, Jens Kuske <jenskuske@...il.com>,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH] clk: sunxi: Extend the simple gates and handle the
Allwinner H3
The H3 has a clock gate definition similar to the other Allwinner SoCs,
but with a different parent clock for each single gate.
Adding the names of the parent clocks in both the source and output clocks
permits the use of the simple-gates driver to define the bus gates
of all known Allwinner SoCs.
Signed-off-by: Jean-Francois Moine <moinejf@...e.fr>
---
This patch replaces a part of Jens Kuske's patch
[PATCH v5 1/4] clk: sunxi: Add H3 clocks support
---
Documentation/devicetree/bindings/clock/sunxi.txt | 25 +++++++++++++++++++++++
drivers/clk/sunxi/clk-simple-gates.c | 14 ++++++++++++-
2 files changed, 38 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index 8a47b77..5736e6d 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -70,6 +70,7 @@ Required properties:
"allwinner,sun8i-a23-usb-clk" - for usb gates + resets on A23
"allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
"allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
+ "allwinner,sunxi-gates-clk" - simple gates
Required properties for all clocks:
- reg : shall be the control register address for the clock.
@@ -93,6 +94,12 @@ The "allwinner,sun9i-a80-mmc-config-clk" clock also requires:
- #reset-cells : shall be set to 1
- resets : shall be the reset control phandle for the mmc block.
+The "allwinner,sunxi-gates-clk" clock also requires:
+- clock-names : corresponding names of the parent clocks
+when the output clocks have different parents.
+These names must be 4 characters long and must appear as a prefix in
+the names of the output clocks. See example.
+
For "allwinner,sun7i-a20-gmac-clk", the parent clocks shall be fixed rate
dummy clocks at 25 MHz and 125 MHz, respectively. See example.
@@ -203,3 +210,21 @@ mmc_config_clk: clk@...13000 {
clock-output-names = "mmc0_config", "mmc1_config",
"mmc2_config", "mmc3_config";
};
+
+bus_gates: clk@...20060 {
+ compatible = "allwinner,sunxi-gates-clk";
+ reg = <0x01c20060 0x14>;
+ clocks = <&ahb1>, <&ahb2>;
+ clock-names = "ahb1", "ahb2";
+ clock-indices = <5>, <6>, <8>,
+ <17>, <18>,
+ <26>, <27>,
+ <28>, <29>,
+ <128>, <135>;
+ clock-output-names = "ahb1_ce", "ahb1_dma", "ahb1_mmc0",
+ "ahb2_emac", "ahb1_ts",
+ "ahb1_ehci2", "ahb1_ehci3",
+ "ahb1_otg_ohci0", "ahb2_ohci1",
+ "ahb1_ephy", "ahb1_dbg";
+ };
+};
diff --git a/drivers/clk/sunxi/clk-simple-gates.c b/drivers/clk/sunxi/clk-simple-gates.c
index 0214c65..81c4cb0 100644
--- a/drivers/clk/sunxi/clk-simple-gates.c
+++ b/drivers/clk/sunxi/clk-simple-gates.c
@@ -29,12 +29,14 @@ static void __init sunxi_simple_gates_setup(struct device_node *node,
{
struct clk_onecell_data *clk_data;
const char *clk_parent, *clk_name;
+ char dyn_clk_parent[8];
struct property *prop;
struct resource res;
void __iomem *clk_reg;
void __iomem *reg;
const __be32 *p;
int number, i = 0, j;
+ bool parent_per_gate;
u8 clk_bit;
u32 index;
@@ -42,7 +44,13 @@ static void __init sunxi_simple_gates_setup(struct device_node *node,
if (IS_ERR(reg))
return;
- clk_parent = of_clk_get_parent_name(node, 0);
+ parent_per_gate = of_clk_get_parent_count(node) != 1;
+ if (parent_per_gate) {
+ clk_parent = dyn_clk_parent;
+ dyn_clk_parent[4] = '\0';
+ } else {
+ clk_parent = of_clk_get_parent_name(node, 0);
+ }
clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
if (!clk_data)
@@ -58,6 +66,8 @@ static void __init sunxi_simple_gates_setup(struct device_node *node,
of_property_for_each_u32(node, "clock-indices", prop, p, index) {
of_property_read_string_index(node, "clock-output-names",
i, &clk_name);
+ if (parent_per_gate)
+ strncpy(dyn_clk_parent, clk_name, 4);
clk_reg = reg + 4 * (index / 32);
clk_bit = index % 32;
@@ -140,6 +150,8 @@ CLK_OF_DECLARE(sun9i_a80_apb0, "allwinner,sun9i-a80-apb0-gates-clk",
sunxi_simple_gates_init);
CLK_OF_DECLARE(sun9i_a80_apb1, "allwinner,sun9i-a80-apb1-gates-clk",
sunxi_simple_gates_init);
+CLK_OF_DECLARE(sunxi_gates, "allwinner,sunxi-gates-clk",sunxi-gates
+ sunxi_simple_gates_init);
static const int sun4i_a10_ahb_critical_clocks[] __initconst = {
14, /* ahb_sdram */
--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists