In the past, NCR5380.c was overlooked by those working on atari_NCR5380.c and this caused needless divergence. All of the changes in this patch were taken from atari_NCR5380.c. This removes some unimportant discrepancies between the two core driver forks so that 'diff' can be used to reveal the important ones, to facilitate reunification. Signed-off-by: Finn Thain --- drivers/scsi/NCR5380.c | 155 +++++++++++++++++++++++++++---------------------- 1 file changed, 87 insertions(+), 68 deletions(-) Index: linux/drivers/scsi/NCR5380.c =================================================================== --- linux.orig/drivers/scsi/NCR5380.c 2015-12-06 12:31:16.000000000 +1100 +++ linux/drivers/scsi/NCR5380.c 2015-12-06 12:31:19.000000000 +1100 @@ -174,7 +174,7 @@ static int do_abort(struct Scsi_Host *); static void do_reset(struct Scsi_Host *); /** - * initialize_SCp - init the scsi pointer field + * initialize_SCp - init the scsi pointer field * @cmd: command block to set up * * Set up the internal fields in the SCSI command. @@ -264,19 +264,6 @@ static inline int NCR5380_poll_politely( reg, bit, val, wait); } -static struct { - unsigned char value; - const char *name; -} phases[] __maybe_unused = { - {PHASE_DATAOUT, "DATAOUT"}, - {PHASE_DATAIN, "DATAIN"}, - {PHASE_CMDOUT, "CMDOUT"}, - {PHASE_STATIN, "STATIN"}, - {PHASE_MSGOUT, "MSGOUT"}, - {PHASE_MSGIN, "MSGIN"}, - {PHASE_UNKNOWN, "UNKNOWN"} -}; - #if NDEBUG static struct { unsigned char mask; @@ -311,6 +298,7 @@ mrs[] = { {MR_TARGET, "MODE TARGET"}, {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"}, {MR_ENABLE_PAR_INTR, "MODE PARITY INTR"}, + {MR_ENABLE_EOP_INTR, "MODE EOP INTR"}, {MR_MONITOR_BSY, "MODE MONITOR BSY"}, {MR_DMA_MODE, "MODE DMA"}, {MR_ARBITRATE, "MODE ARBITRATION"}, @@ -318,8 +306,8 @@ mrs[] = { }; /** - * NCR5380_print - print scsi bus signals - * @instance: adapter state to dump + * NCR5380_print - print scsi bus signals + * @instance: adapter state to dump * * Print the SCSI bus signals for debugging purposes */ @@ -353,9 +341,21 @@ static void NCR5380_print(struct Scsi_Ho printk("\n"); } +static struct { + unsigned char value; + const char *name; +} phases[] = { + {PHASE_DATAOUT, "DATAOUT"}, + {PHASE_DATAIN, "DATAIN"}, + {PHASE_CMDOUT, "CMDOUT"}, + {PHASE_STATIN, "STATIN"}, + {PHASE_MSGOUT, "MSGOUT"}, + {PHASE_MSGIN, "MSGIN"}, + {PHASE_UNKNOWN, "UNKNOWN"} +}; /** - * NCR5380_print_phase - show SCSI phase + * NCR5380_print_phase - show SCSI phase * @instance: adapter to dump * * Print the current SCSI phase for debugging purposes @@ -370,7 +370,9 @@ static void NCR5380_print_phase(struct S if (!(status & SR_REQ)) shost_printk(KERN_DEBUG, instance, "REQ not asserted, phase unknown.\n"); else { - for (i = 0; (phases[i].value != PHASE_UNKNOWN) && (phases[i].value != (status & PHASE_MASK)); ++i); + for (i = 0; (phases[i].value != PHASE_UNKNOWN) && + (phases[i].value != (status & PHASE_MASK)); ++i) + ; shost_printk(KERN_DEBUG, instance, "phase %s\n", phases[i].name); } } @@ -511,7 +513,7 @@ static int __maybe_unused NCR5380_write_ } static int __maybe_unused NCR5380_show_info(struct seq_file *m, - struct Scsi_Host *instance) + struct Scsi_Host *instance) { struct NCR5380_hostdata *hostdata = shost_priv(instance); @@ -522,7 +524,7 @@ static int __maybe_unused NCR5380_show_i #endif /** - * NCR5380_init - initialise an NCR5380 + * NCR5380_init - initialise an NCR5380 * @instance: adapter to configure * @flags: control flags * @@ -530,7 +532,7 @@ static int __maybe_unused NCR5380_show_i * with flags OR'd into the initial flags value. * * Notes : I assume that the host, hostno, and id bits have been - * set correctly. I don't care about the irq and other fields. + * set correctly. I don't care about the irq and other fields. * * Returns 0 for success */ @@ -541,10 +543,9 @@ static int NCR5380_init(struct Scsi_Host int i; unsigned long deadline; - if(in_interrupt()) - printk(KERN_ERR "NCR5380_init called with interrupts off!\n"); - + hostdata->host = instance; hostdata->id_mask = 1 << instance->this_id; + hostdata->id_higher_mask = 0; for (i = hostdata->id_mask; i <= 0x80; i <<= 1) if (i > hostdata->id_mask) hostdata->id_higher_mask |= i; @@ -569,8 +570,6 @@ static int NCR5380_init(struct Scsi_Host if (!hostdata->work_q) return -ENOMEM; - hostdata->host = instance; - prepare_info(instance); #ifndef REAL_DMA @@ -647,8 +646,10 @@ static int NCR5380_maybe_reset_bus(struc } /** - * NCR5380_exit - remove an NCR5380 + * NCR5380_exit - remove an NCR5380 * @instance: adapter to remove + * + * Assumes that no more work can be queued (e.g. by NCR5380_intr). */ static void NCR5380_exit(struct Scsi_Host *instance) @@ -713,7 +714,7 @@ static int NCR5380_queue_command(struct cmd->scsi_done(cmd); return 0; } -#endif /* (NDEBUG & NDEBUG_NO_WRITE) */ +#endif /* (NDEBUG & NDEBUG_NO_WRITE) */ cmd->result = 0; @@ -800,7 +801,7 @@ static void requeue_cmd(struct Scsi_Host } /** - * NCR5380_main - NCR state machines + * NCR5380_main - NCR state machines * * NCR5380_main is a coroutine that runs as long as more work can * be done on the NCR5380 host adapters in a system. Both @@ -1066,7 +1067,9 @@ static struct scsi_cmnd *NCR5380_select( udelay(3); /* Check for lost arbitration */ - if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) || (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) || (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) { + if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) || + (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) || + (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) { NCR5380_write(MODE_REG, MR_BASE); dsprintk(NDEBUG_ARBITRATION, instance, "lost arbitration, deasserting MR_ARBITRATE\n"); spin_lock_irq(&hostdata->lock); @@ -1132,7 +1135,7 @@ static struct scsi_cmnd *NCR5380_select( * The initiator shall then wait at least two deskew delays and release * the BSY signal. */ - udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */ + udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */ /* Reset BSY */ NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL)); @@ -1269,7 +1272,7 @@ out: * bytes to transfer, **data - pointer to data pointer. * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes or transferred or exit + * maximum number of bytes, 0 if all bytes are transferred or exit * is in same phase. * * Also, *phase, *count, *data are modified in place. @@ -1283,7 +1286,10 @@ out: * counts, we will always do a pseudo DMA or DMA transfer. */ -static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data) { +static int NCR5380_transfer_pio(struct Scsi_Host *instance, + unsigned char *phase, int *count, + unsigned char **data) +{ unsigned char p = *phase, tmp; int c = *count; unsigned char *d = *data; @@ -1294,7 +1300,7 @@ static int NCR5380_transfer_pio(struct S * REGISTER match the STATUS REGISTER */ - NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p)); + NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p)); do { /* @@ -1313,6 +1319,7 @@ static int NCR5380_transfer_pio(struct S NCR5380_dprint_phase(NDEBUG_PIO, instance); break; } + /* Do actual transfer from SCSI bus to / from memory */ if (!(p & SR_IO)) NCR5380_write(OUTPUT_DATA_REG, *d); @@ -1450,12 +1457,14 @@ static int do_abort(struct Scsi_Host *in NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp)); if (tmp != PHASE_MSGOUT) { - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK); + NCR5380_write(INITIATOR_COMMAND_REG, + ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK); rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 3 * HZ); if (rc < 0) goto timeout; NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); } + tmp = ABORT; msgptr = &tmp; len = 1; @@ -1494,7 +1503,11 @@ timeout: */ -static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data) { +static int NCR5380_transfer_dma(struct Scsi_Host *instance, + unsigned char *phase, int *count, + unsigned char **data) +{ + struct NCR5380_hostdata *hostdata = shost_priv(instance); register int c = *count; register unsigned char p = *phase; register unsigned char *d = *data; @@ -1505,8 +1518,6 @@ static int NCR5380_transfer_dma(struct S unsigned char saved_data = 0, overrun = 0, residue; #endif - struct NCR5380_hostdata *hostdata = shost_priv(instance); - if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) { *phase = tmp; return -1; @@ -1736,7 +1747,8 @@ static int NCR5380_transfer_dma(struct S * to recover from an unexpected bus free condition. */ -static void NCR5380_information_transfer(struct Scsi_Host *instance) { +static void NCR5380_information_transfer(struct Scsi_Host *instance) +{ struct NCR5380_hostdata *hostdata = shost_priv(instance); unsigned char msgout = NOP; int sink = 0; @@ -1763,11 +1775,13 @@ static void NCR5380_information_transfer NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp)); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK); - while (NCR5380_read(STATUS_REG) & SR_REQ); + while (NCR5380_read(STATUS_REG) & SR_REQ) + ; NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); sink = 0; continue; } + switch (phase) { case PHASE_DATAOUT: #if (NDEBUG & NDEBUG_NO_DATAOUT) @@ -1793,6 +1807,7 @@ static void NCR5380_information_transfer cmd->SCp.this_residual, cmd->SCp.buffers_residual); } + /* * The preferred transfer method is going to be * PSEUDO-DMA for systems that are strictly PIO, @@ -1811,13 +1826,15 @@ static void NCR5380_information_transfer if (transfersize) { len = transfersize; - if (NCR5380_transfer_dma(instance, &phase, &len, (unsigned char **) &cmd->SCp.ptr)) { + if (NCR5380_transfer_dma(instance, &phase, + &len, (unsigned char **)&cmd->SCp.ptr)) { /* - * If the watchdog timer fires, all future accesses to this - * device will use the polled-IO. + * If the watchdog timer fires, all future + * accesses to this device will use the + * polled-IO. */ scmd_printk(KERN_INFO, cmd, - "switching to slow handshake\n"); + "switching to slow handshake\n"); cmd->device->borken = 1; sink = 1; do_abort(instance); @@ -1893,25 +1910,24 @@ static void NCR5380_information_transfer break; } break; - case DISCONNECT:{ - /* Accept message by clearing ACK */ - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - hostdata->connected = NULL; - list_add(&ncmd->list, &hostdata->disconnected); - dsprintk(NDEBUG_INFORMATION | NDEBUG_QUEUES, - instance, "connected command %p for target %d lun %llu moved to disconnected queue\n", - cmd, scmd_id(cmd), cmd->device->lun); + case DISCONNECT: + /* Accept message by clearing ACK */ + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); + hostdata->connected = NULL; + list_add(&ncmd->list, &hostdata->disconnected); + dsprintk(NDEBUG_INFORMATION | NDEBUG_QUEUES, + instance, "connected command %p for target %d lun %llu moved to disconnected queue\n", + cmd, scmd_id(cmd), cmd->device->lun); - /* - * Restore phase bits to 0 so an interrupted selection, - * arbitration can resume. - */ - NCR5380_write(TARGET_COMMAND_REG, 0); + /* + * Restore phase bits to 0 so an interrupted selection, + * arbitration can resume. + */ + NCR5380_write(TARGET_COMMAND_REG, 0); - /* Enable reselect interrupts */ - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - return; - } + /* Enable reselect interrupts */ + NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); + return; /* * The SCSI data pointer is *IMPLICITLY* saved on a disconnect * operation, in violation of the SCSI spec so we can safely @@ -2001,15 +2017,17 @@ static void NCR5380_information_transfer printk("\n"); } else if (tmp != EXTENDED_MESSAGE) scmd_printk(KERN_INFO, cmd, - "rejecting unknown message %02x\n",tmp); + "rejecting unknown message %02x\n", + tmp); else scmd_printk(KERN_INFO, cmd, - "rejecting unknown extended message code %02x, length %d\n", extended_msg[1], extended_msg[0]); + "rejecting unknown extended message code %02x, length %d\n", + extended_msg[1], extended_msg[0]); msgout = MESSAGE_REJECT; NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); break; - } /* switch (tmp) */ + } /* switch (tmp) */ break; case PHASE_MSGOUT: len = 1; @@ -2044,7 +2062,7 @@ static void NCR5380_information_transfer default: shost_printk(KERN_ERR, instance, "unknown phase\n"); NCR5380_dprint(NDEBUG_ANY, instance); - } /* switch(phase) */ + } /* switch(phase) */ } else { spin_unlock_irq(&hostdata->lock); NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ); @@ -2063,7 +2081,8 @@ static void NCR5380_information_transfer * Inputs : instance - this instance of the NCR5380. */ -static void NCR5380_reselect(struct Scsi_Host *instance) { +static void NCR5380_reselect(struct Scsi_Host *instance) +{ struct NCR5380_hostdata *hostdata = shost_priv(instance); unsigned char target_mask; unsigned char lun, phase; @@ -2160,8 +2179,8 @@ static void NCR5380_reselect(struct Scsi shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d not in disconnected queue.\n", target_mask, lun); /* - * Since we have an established nexus that we can't do anything with, - * we must abort it. + * Since we have an established nexus that we can't do anything + * with, we must abort it. */ do_abort(instance); return; -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/