linux-kernel - Re: [PATCH v7 2/6] mfd: syscon: add a DT property to set value width

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20151207094020.GF3384@x1>
Date:	Mon, 7 Dec 2015 09:40:20 +0000
From:	Lee Jones <lee.jones@...aro.org>
To:	Damien Riegel <damien.riegel@...oirfairelinux.com>
Cc:	linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-watchdog@...r.kernel.org, devicetree@...r.kernel.org,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Russell King <linux@....linux.org.uk>,
	Shawn Guo <shawnguo@...nel.org>,
	Sascha Hauer <kernel@...gutronix.de>,
	Arnd Bergmann <arnd@...db.de>,
	Samuel Ortiz <sameo@...ux.intel.com>,
	Wim Van Sebroeck <wim@...ana.be>,
	Guenter Roeck <linux@...ck-us.net>, kernel@...oirfairelinux.com
Subject: Re: [PATCH v7 2/6] mfd: syscon: add a DT property to set value width

On Mon, 30 Nov 2015, Damien Riegel wrote:

> Currently syscon has a fixed configuration of 32 bits for register and
> values widths. In some cases, it would be desirable to be able to
> customize the value width.
> 
> For example, certain boards (like the ones manufactured by Technologic
> Systems) have a FPGA that is memory-mapped, but its registers are only
> 16-bit wide.
> 
> This patch adds an optional "reg-io-width" DT binding for syscon that
> allows to change the width for the data bus (i.e. val_bits). If this
> property is provided, it will also set the register stride to
> reg-io-width's value. If not provided, the default configuration is
> used.
> 
> Signed-off-by: Damien Riegel <damien.riegel@...oirfairelinux.com>
> ---
>  Documentation/devicetree/bindings/mfd/syscon.txt |  4 ++++
>  drivers/mfd/syscon.c                             | 13 +++++++++++++
>  2 files changed, 17 insertions(+)

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt
> index fe8150b..408f768 100644
> --- a/Documentation/devicetree/bindings/mfd/syscon.txt
> +++ b/Documentation/devicetree/bindings/mfd/syscon.txt
> @@ -13,6 +13,10 @@ Required properties:
>  - compatible: Should contain "syscon".
>  - reg: the register region can be accessed from syscon
>  
> +Optional property:
> +- reg-io-width: the size (in bytes) of the IO accesses that should be
> +  performed on the device.
> +
>  Examples:
>  gpr: iomuxc-gpr@...e0000 {
>  	compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
> diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
> index 176bf0f..b7aabee 100644
> --- a/drivers/mfd/syscon.c
> +++ b/drivers/mfd/syscon.c
> @@ -47,6 +47,7 @@ static struct syscon *of_syscon_register(struct device_node *np)
>  	struct syscon *syscon;
>  	struct regmap *regmap;
>  	void __iomem *base;
> +	u32 reg_io_width;
>  	int ret;
>  	struct regmap_config syscon_config = syscon_regmap_config;
>  
> @@ -69,6 +70,18 @@ static struct syscon *of_syscon_register(struct device_node *np)
>  	 else if (of_property_read_bool(np, "little-endian"))
>  		syscon_config.val_format_endian = REGMAP_ENDIAN_LITTLE;
>  
> +	/*
> +	 * search for reg-io-width property in DT. If it is not provided,
> +	 * default to 4 bytes. regmap_init_mmio will return an error if values
> +	 * are invalid so there is no need to check them here.
> +	 */
> +	ret = of_property_read_u32(np, "reg-io-width", &reg_io_width);
> +	if (ret)
> +		reg_io_width = 4;
> +
> +	syscon_config.reg_stride = reg_io_width;
> +	syscon_config.val_bits = reg_io_width * 8;
> +
>  	regmap = regmap_init_mmio(NULL, base, &syscon_config);
>  	if (IS_ERR(regmap)) {
>  		pr_err("regmap init failed\n");

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/