| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAGb2v65GQYgnKcmTqXCZpRMpbZiPKMyrg628wc4i+pK6=v62Eg@mail.gmail.com>
Date: Mon, 7 Dec 2015 21:46:24 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc: Chen-Yu Tsai <wens@...e.org>, Emilio Lopez <emilio@...pez.com.ar>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
linux-clk <linux-clk@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-sunxi <linux-sunxi@...glegroups.com>
Subject: Re: [PATCH v5] clk: sunxi: Add CLK_OF_DECLARE support for
sun8i-a23-apb0-clk driver
On Mon, Dec 7, 2015 at 5:36 PM, Maxime Ripard
<maxime.ripard@...e-electrons.com> wrote:
> Hi,
>
> On Thu, Dec 03, 2015 at 03:05:30PM +0800, Chen-Yu Tsai wrote:
>> The APBS clock on sun9i is the same as the APB0 clock on sun8i. With
>> sun9i we are supporting the PRCM clocks by using CLK_OF_DECLARE,
>> instead of through a PRCM mfd device and subdevices for each clock
>> and reset control. As such we need a CLK_OF_DECLARE version of
>> the sun8i-a23-apb0-clk driver.
>>
>> Also, build it for sun9i/A80, and not just for configurations with
>> MFD_SUN6I_PRCM enabled.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@...e.org>
>> ---
>>
>> Changes since v4:
>>
>> - Keep building clk-sun8i-apb0 for SUN6I_MFD_PRCM.
>>
>> - Add an error message and comment for when of_io_request_and_map()
>> fails. of_io_request_and_map() merges a bunch of errors into -EINVAL,
>> so this might not be the best approach. But I think having an error
>> message when we know something is wrong (-EBUSY, -ENOMEM) is better.
>>
>> ---
>> drivers/clk/sunxi/Makefile | 1 +
>> drivers/clk/sunxi/clk-sun8i-apb0.c | 80 ++++++++++++++++++++++++++++++++------
>> 2 files changed, 69 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
>> index 103efab05ca8..ccf21ba3b6b0 100644
>> --- a/drivers/clk/sunxi/Makefile
>> +++ b/drivers/clk/sunxi/Makefile
>> @@ -15,6 +15,7 @@ obj-y += clk-sun9i-core.o
>> obj-y += clk-sun9i-mmc.o
>> obj-y += clk-usb.o
>>
>> +obj-$(CONFIG_MACH_SUN9I) += clk-sun8i-apb0.o
>> obj-$(CONFIG_MACH_SUN9I) += clk-sun9i-cpus.o
>>
>> obj-$(CONFIG_MFD_SUN6I_PRCM) += \
>> diff --git a/drivers/clk/sunxi/clk-sun8i-apb0.c b/drivers/clk/sunxi/clk-sun8i-apb0.c
>> index 7ae5d2c2cde1..7ba61103a6f5 100644
>> --- a/drivers/clk/sunxi/clk-sun8i-apb0.c
>> +++ b/drivers/clk/sunxi/clk-sun8i-apb0.c
>> @@ -17,13 +17,77 @@
>> #include <linux/clk-provider.h>
>> #include <linux/module.h>
>> #include <linux/of.h>
>> +#include <linux/of_address.h>
>> #include <linux/platform_device.h>
>>
>> +static struct clk *sun8i_a23_apb0_register(struct device_node *node,
>> + void __iomem *reg)
>> +{
>> + const char *clk_name = node->name;
>> + const char *clk_parent;
>> + struct clk *clk;
>> + int ret;
>> +
>> + clk_parent = of_clk_get_parent_name(node, 0);
>> + if (!clk_parent)
>> + return ERR_PTR(-EINVAL);
>> +
>> + of_property_read_string(node, "clock-output-names", &clk_name);
>> +
>> + /* The A23 APB0 clock is a standard 2 bit wide divider clock */
>> + clk = clk_register_divider(NULL, clk_name, clk_parent, 0, reg,
>> + 0, 2, CLK_DIVIDER_POWER_OF_TWO, NULL);
>> + if (IS_ERR(clk))
>> + return clk;
>> +
>> + ret = of_clk_add_provider(node, of_clk_src_simple_get, clk);
>> + if (ret)
>> + goto err_unregister;
>> +
>> + return clk;
>> +
>> +err_unregister:
>> + clk_unregister_divider(clk);
>> +
>> + return ERR_PTR(ret);
>> +}
>> +
>> +static void sun8i_a23_apb0_setup(struct device_node *node)
>> +{
>> + void __iomem *reg;
>> + struct resource res;
>> + struct clk *clk;
>> +
>> + reg = of_io_request_and_map(node, 0, of_node_full_name(node));
>> + if (IS_ERR(reg)) {
>> + /*
>> + * This happens with clk nodes instantiated through mfd,
>> + * as those do not have their resources assigned in the
>> + * device tree. Do not print an error in this case.
>> + */
>> + if (PTR_ERR(reg) != -EINVAL)
>> + pr_err("Could not get registers for a23-apb0-clk\n");
>
> This is not the only case you have to take into account.
>
> There's also the case when you have a regular clock (and by regular I
> mean that is not in the PRCM) that will be probed by the
> CLK_OF_DECLARE mechanism and then later by the device model.
>
> In such a case, the second of_io_request_and_map will fail, and you
> will have an error returned that you do not ignore at the moment.
Right. It will return -EBUSY. But ignoring it and returning 0 is telling
the driver core that the device successfully binded. I think this is
wrong.
Normal clocks should be in the "clocks" node, and wouldn't be probed a
second time through the device model, would it? Am I missing something?
ChenYu
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists