[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <5665A775.9040707@fivetechno.de>
Date: Mon, 7 Dec 2015 16:36:21 +0100
From: Markus Reichl <m.reichl@...etechno.de>
To: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Thomas Abraham <thomas.ab@...sung.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Mike Turquette <mturquette@...aro.org>,
Kukjin Kim <kgene.kim@...sung.com>,
Kukjin Kim <kgene@...nel.org>,
Viresh Kumar <viresh.kumar@...aro.org>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Ben Gamari <ben@...rt-cactus.org>
Cc: Tomasz Figa <tomasz.figa@...il.com>,
Lukasz Majewski <l.majewski@...sung.com>,
Heiko Stuebner <heiko@...ech.de>,
Chanwoo Choi <cw00.choi@...sung.com>,
Kevin Hilman <khilman@...aro.org>,
Javier Martinez Canillas <javier@....samsung.com>,
Tobias Jakobi <tjakobi@...h.uni-bielefeld.de>,
Anand Moon <linux.amoon@...il.com>,
linux-samsung-soc@...r.kernel.org, linux-pm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 0/10] cpufreq: add generic cpufreq driver support for
Exynos542x/5800 platforms
Hi,
I have tested this patch set on Odroid-XU4 and get:
[ 2.140821] cpu cpu0: Looking up cpu-cluster.1-supply from device tree
[ 2.142780] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[ 2.146858] cpufreq: ondemand governor failed, too long transition latency of HW, fallback to performance governor
[ 2.161574] cpu cpu4: Looking up cpu-cluster.0-supply from device tree
[ 2.163277] cpu cpu4: bL_cpufreq_init: CPU 4 initialized
[ 2.167263] cpufreq: ondemand governor failed, too long transition latency of HW, fallback to performance governor
[ 2.180092] arm_big_little: bL_cpufreq_register: Registered platform driver: dt-bl
cpufreq stays in performance mode and does not change down from highest frequency.
Had the same behaviour with Ben Gamari's patch.
Thanks,
--
Markus
Am 04.12.2015 um 18:30 schrieb Bartlomiej Zolnierkiewicz:
> Hi,
>
> This patch series adds generic arm_big_little_dt cpufreq driver
> support for Exynos542x/5800 (using the new CPU clock type which
> allows it). It also:
> - enhances arm_big_little[_dt] driver with CPU cluster regulator
> support
> - adds CPU clock configuration data and CPU operating points
> setup for Exynos542x/5800
> - adds CPU cluster regulator supplies for Exynos542x/5800 boards
>
> This patch series has been tested on Exynos5422 based ODROID-XU3
> Lite board.
>
> Please note that this is not a final version of the patchset.
> I just wanted to push out current work-in-progress patches that
> integrate changes from Anand, Ben and me.
>
> TODO:
> - porting the Exynos542x/5800 support over cpufreq-dt
>
> Depends on:
> - next-20151124 branch of linux-next kernel tree
>
> Changes since v2:
> - ported over next-20151124 branch
> - integrated missing CLK_RECALC_NEW_RATES flags fix to patch #3
> (from Anand Moon)
> - added regulator supply properties for ODROID-XU3 Lite and
> ODROID-XU4 in patch #2
> - ported CPU OPPs to operating-points-v2 (from Ben Gamari)
> - added "ARM: dts: Exynos5422: fix OPP tables" patch (from Ben
> Gamari)
> - added "cpufreq: arm-big-little: accept operating-points-v2
> nodes" patch (from Ben Gamari)
> - renamed OPP nodes as opp@<opp-hz>
>
> Changes since v1:
> - added CPU cluster regulator supply properties to
> exynos5420-arndale-octa.dts, exynos5420-peach-pit.dts,
> exynos5420-smdk5420.dts and exynos5800-peach-pi.dts
>
> Changes over Thomas' original v12 code:
> - split Exynos5420 and Exynos5800 support
> - moved E5420_[EGL,KFC]_DIV0() macros to clk-exynos5420.c
> - disabled cpufreq if big.LITTLE switcher support is enabled
> - enhanced arm_big_little[_dt] driver with CPU cluster regulator
> support
> - fixed CPU clock configuration data for Exynos5800
> - fixed CPU operating points setup for Exynos5800
> - added CPU cluster regulator supplies for ODROID-XU3 board
>
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
>
>
> Bartlomiej Zolnierkiewicz (4):
> cpufreq: arm_big_little: add cluster regulator support
> ARM: dts: Exynos5420/5800: add cluster regulator supply properties
> clk: samsung: exynos5800: fix cpu clock configuration data
> ARM: dts: Exynos5800: fix CPU OPP
>
> Ben Gamari (2):
> ARM: dts: Exynos5422: fix OPP tables
> cpufreq: arm-big-little: accept operating-points-v2 nodes
>
> Thomas Abraham (4):
> clk: samsung: exynos5420: add cpu clock configuration data and
> instantiate cpu clock
> ARM: dts: Exynos5420: add CPU OPP and regulator supply property
> ARM: Exynos: use generic cpufreq driver for Exynos5420
> ARM: Exynos: use generic cpufreq driver for Exynos5800
>
> .../bindings/cpufreq/arm_big_little_dt.txt | 4 +
> arch/arm/boot/dts/exynos5420-arndale-octa.dts | 8 +
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 8 +
> arch/arm/boot/dts/exynos5420-smdk5420.dts | 8 +
> arch/arm/boot/dts/exynos5420.dtsi | 122 ++++++++++++++
> arch/arm/boot/dts/exynos5422-cpus.dtsi | 10 ++
> arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 8 +
> arch/arm/boot/dts/exynos5422-odroidxu3.dts | 8 +
> arch/arm/boot/dts/exynos5422-odroidxu4.dts | 8 +
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 8 +
> arch/arm/boot/dts/exynos5800.dtsi | 165 +++++++++++++++++++
> arch/arm/mach-exynos/exynos.c | 8 +
> drivers/clk/samsung/clk-exynos5420.c | 88 ++++++++++-
> drivers/cpufreq/arm_big_little.c | 175 +++++++++++++++++----
> drivers/cpufreq/arm_big_little_dt.c | 12 +-
> include/dt-bindings/clock/exynos5420.h | 2 +
> 16 files changed, 608 insertions(+), 34 deletions(-)
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists