| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 8 Dec 2015 16:52:41 +0000
From: Liviu Dudau <Liviu.Dudau@....com>
To: Robin Murphy <robin.murphy@....com>
Cc: David Airlie <airlied@...ux.ie>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Rob Herring <robh+dt@...nel.org>,
Sudeep Holla <sudeep.holla@....com>,
Jon Medhurst <tixy@...aro.org>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Rob Herring <robh@...nel.org>,
Russell King <rmk+kernel@....linux.org.uk>,
Pawel Moll <pawel.moll@....com>, Arnd Bergmann <arnd@...db.de>,
Olof Johansson <olof@...om.net>,
Punit Agrawal <punit.agrawal@....com>,
DRI devel <dri-devel@...ts.freedesktop.org>,
devicetree <devicetree@...r.kernel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Andrew Morton <akpm@...ux-foundation.org>,
LAKML <linux-arm-kernel@...ts.infradead.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v5 2/4] drm: Add support for ARM's HDLCD controller.
On Tue, Dec 08, 2015 at 04:25:27PM +0000, Robin Murphy wrote:
> Hi Liviu,
>
> On 07/12/15 12:11, Liviu Dudau wrote:
> >The HDLCD controller is a display controller that supports resolutions
> >up to 4096x4096 pixels. It is present on various development boards
> >produced by ARM Ltd and emulated by the latest Fast Models from the
> >company.
> >
> > Cc: David Airlie <airlied@...ux.ie>
> > Cc: Robin Murphy <robin.murphy@....com>
>
> I've given this a spin on my Juno, and the first thing of note is this:
>
> hdlcd 7ff60000.hdlcd: master bind failed: -517
> hdlcd 7ff50000.hdlcd: master bind failed: -517
> scpi_protocol scpi: SCP Protocol 1.0 Firmware 1.9.0 version
> [drm] found ARM HDLCD version r0p0
> tda998x 0-0070: Falling back to first CRTC
> usb 1-1: new high-speed USB device number 2 using ehci-platform
> tda998x 0-0070: found TDA19988
> hdlcd 7ff60000.hdlcd: bound 0-0070 (ops tda998x_ops)
> [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [drm] No driver support for vblank timestamp query.
> ------------[ cut here ]------------
> WARNING: at drivers/gpu/drm/drm_atomic_helper.c:682
> Modules linked in:
>
> CPU: 2 PID: 98 Comm: kworker/u12:3 Tainted: G W 4.4.0-rc2+ #846
> Hardware name: ARM Juno development board (r1) (DT)
> Workqueue: deferwq deferred_probe_work_func
> task: fffffe007ecb3700 ti: fffffe09409c8000 task.ti: fffffe09409c8000
> PC is at drm_atomic_helper_update_legacy_modeset_state+0x1e8/0x1f0
> LR is at drm_atomic_helper_commit_modeset_disables+0x1a8/0x388
> pc : [<fffffe00004a4468>] lr : [<fffffe00004a59b8>] pstate: 20000045
> sp : fffffe09409cb560
> x29: fffffe09409cb560 x28: fffffe0940bf2800
> x27: fffffe0940070000 x26: 0000000000000001
> x25: fffffe0000be4b50 x24: fffffe00007ae820
> x23: fffffe0000be4b50 x22: fffffe0940bd1000
> x21: fffffe0940bd1000 x20: 0000000000000000
> x19: fffffe0940968000 x18: fffffe0940c8091c
> x17: 0000000000000007 x16: 0000000000000001
> x15: fffffe0940c8016f x14: 0000003c00000000
> x13: 0000000000000000 x12: 000004c9000004b4
> x11: 000004b1000004c9 x10: 000004b0000004b0
> x9 : 00000000000006f4 x8 : 000006a400000654
> x7 : 000006f400000640 x6 : fffffe0940966480
> x5 : fffffe0940968200 x4 : 0000000000000001
> x3 : fffffe0940966a80 x2 : 0000000000000000
> x1 : fffffe0940bd0900 x0 : fffffe0940bd0960
>
> ---[ end trace bdb6af69b29bf7ea ]---
> Call trace:
> [<fffffe00004a4468>]
> drm_atomic_helper_update_legacy_modeset_state+0x1e8/0x1f0
> [<fffffe00004a59b8>] drm_atomic_helper_commit_modeset_disables+0x1a8/0x388
> [<fffffe00004a5c70>] drm_atomic_helper_commit+0xd8/0x140
> [<fffffe00004ccce0>] hdlcd_atomic_commit+0x10/0x18
> [<fffffe00004c9ef8>] drm_atomic_commit+0x40/0x70
> [<fffffe00004a69b0>] restore_fbdev_mode+0x270/0x2b0
> [<fffffe00004a8d64>] drm_fb_helper_restore_fbdev_mode_unlocked+0x34/0x90
> [<fffffe00004a8dec>] drm_fb_helper_set_par+0x2c/0x60
> [<fffffe000042f010>] fbcon_init+0x4d0/0x520
> [<fffffe000046ec9c>] visual_init+0xac/0x108
> [<fffffe000047060c>] do_bind_con_driver+0x1d4/0x3e8
> [<fffffe0000470c14>] do_take_over_console+0x174/0x1e8
> [<fffffe000042c38c>] do_fbcon_takeover+0x74/0x100
> [<fffffe00004313b4>] fbcon_event_notify+0x77c/0x7d8
> [<fffffe00000dc700>] notifier_call_chain+0x50/0x90
> [<fffffe00000dcadc>] __blocking_notifier_call_chain+0x4c/0x90
> [<fffffe00000dcb34>] blocking_notifier_call_chain+0x14/0x20
> [<fffffe0000435204>] fb_notifier_call_chain+0x1c/0x28
> [<fffffe0000437010>] register_framebuffer+0x1c0/0x2b8
> [<fffffe00004a90a4>] drm_fb_helper_initial_config+0x284/0x3e8
> [<fffffe00004a991c>] drm_fbdev_cma_init+0x94/0x148
> [<fffffe00004ccfc4>] hdlcd_drm_bind+0x1d4/0x418
> [<fffffe00004d15f0>] try_to_bring_up_master.part.2+0xc8/0x110
> [<fffffe00004d1820>] component_add+0x90/0x108
> [<fffffe00004ce6a8>] tda998x_probe+0x18/0x20
> [<fffffe00005a6d24>] i2c_device_probe+0x164/0x228
> [<fffffe00004d698c>] driver_probe_device+0x1ec/0x2f0
> [<fffffe00004d6bc0>] __device_attach_driver+0x90/0xd8
> [<fffffe00004d4b88>] bus_for_each_drv+0x58/0x98
> [<fffffe00004d66e4>] __device_attach+0xc4/0x148
> [<fffffe00004d6c58>] device_initial_probe+0x10/0x18
> [<fffffe00004d5b9c>] bus_probe_device+0x94/0xa0
> [<fffffe00004d6020>] deferred_probe_work_func+0x70/0xa8
> [<fffffe00000d5b70>] process_one_work+0x138/0x378
> [<fffffe00000d5ed4>] worker_thread+0x124/0x498
> [<fffffe00000dbb54>] kthread+0xdc/0xf0
> [<fffffe0000093980>] ret_from_fork+0x10/0x50
> Console: switching to colour frame buffer device 150x100
>
> which for reference, is the first one in that function:
>
> ...
> /* clear out existing links and update dpms */
> for_each_connector_in_state(old_state, connector, old_conn_state, i) {
> if (connector->encoder) {
> WARN_ON(!connector->encoder->crtc);
> ...
>
> That's on 4.4-rc2 with this series plus the 3 tda998x patches from Russell's
> patch system applied. Is there something else I'm missing or does this need
> looking at (could it be related to that initial probe deferral)?
Yeah, you also need Thierry Reding's patch to not set the connector->encoder in
drivers.
http://lists.freedesktop.org/archives/dri-devel/2015-November/094576.html
>
> >Signed-off-by: Liviu Dudau <Liviu.Dudau@....com>
> >Acked-by: Daniel Vetter <daniel.vetter@...ll.ch>
> >---
> > drivers/gpu/drm/Kconfig | 2 +
> > drivers/gpu/drm/Makefile | 1 +
> > drivers/gpu/drm/arm/Kconfig | 29 ++
> > drivers/gpu/drm/arm/Makefile | 2 +
> > drivers/gpu/drm/arm/hdlcd_crtc.c | 329 ++++++++++++++++++++++
> > drivers/gpu/drm/arm/hdlcd_drv.c | 580 +++++++++++++++++++++++++++++++++++++++
> > drivers/gpu/drm/arm/hdlcd_drv.h | 42 +++
> > drivers/gpu/drm/arm/hdlcd_regs.h | 87 ++++++
> > 8 files changed, 1072 insertions(+)
> > create mode 100644 drivers/gpu/drm/arm/Kconfig
> > create mode 100644 drivers/gpu/drm/arm/Makefile
> > create mode 100644 drivers/gpu/drm/arm/hdlcd_crtc.c
> > create mode 100644 drivers/gpu/drm/arm/hdlcd_drv.c
> > create mode 100644 drivers/gpu/drm/arm/hdlcd_drv.h
> > create mode 100644 drivers/gpu/drm/arm/hdlcd_regs.h
>
> [...]
>
> >+static int hdlcd_set_pxl_fmt(struct drm_crtc *crtc)
> >+{
> >+ unsigned int btpp, default_color = 0x00000000;
> >+ struct hdlcd_drm_private *hdlcd = crtc_to_hdlcd_priv(crtc);
> >+ uint32_t pixel_format;
> >+ struct simplefb_format *format = NULL;
> >+ int i;
> >+
> >+#ifdef CONFIG_DRM_HDLCD_SHOW_UNDERRUN
> >+ default_color = 0x00ff0000; /* show underruns in red */
> >+#endif
> >+
> >+ pixel_format = crtc->primary->state->fb->pixel_format;
> >+
> >+ for (i = 0; i < ARRAY_SIZE(supported_formats); i++) {
> >+ if (supported_formats[i].fourcc == pixel_format)
> >+ format = &supported_formats[i];
> >+ }
> >+
> >+ if (WARN_ON(!format)) {
> >+ return 0;
> >+ }
>
> nit: unnecessary braces.
>
> >+ /* HDLCD uses 'bytes per pixel', zero means 1 byte */
> >+ btpp = (format->bits_per_pixel + 7) / 8;
> >+ hdlcd_write(hdlcd, HDLCD_REG_PIXEL_FORMAT, (btpp - 1) << 3);
> >+
> >+ /*
> >+ * The format of the HDLCD_REG_<color>_SELECT register is:
> >+ * - bits[23:16] - default value for that color component
> >+ * - bits[11:8] - number of bits to extract for each color component
> >+ * - bits[4:0] - index of the lowest bit to extract
> >+ *
> >+ * The default color value is used when bits[11:8] are zero, when the
> >+ * pixel is outside the visible frame area or when there is a
> >+ * buffer underrun.
> >+ */
> >+ hdlcd_write(hdlcd, HDLCD_REG_RED_SELECT, default_color |
> >+ format->red.offset | (format->red.length & 0xf) << 8);
> >+ hdlcd_write(hdlcd, HDLCD_REG_GREEN_SELECT, default_color |
> >+ format->green.offset | (format->green.length & 0xf) << 8);
> >+ hdlcd_write(hdlcd, HDLCD_REG_BLUE_SELECT, default_color |
> >+ format->blue.offset | (format->blue.length & 0xf) << 8);
>
> These would seem to be putting bits 23:16 from default_color into the
> default field of every register, and indeed underruns show up as a very
> white-looking shade of red for me ;)
Ooops, I better change that. Could you tell me how you trigger underruns
in your setup?
>
> >+ return 0;
> >+}
>
> [...]
>
> >+static void hdlcd_fb_output_poll_changed(struct drm_device *drm)
> >+{
> >+ struct hdlcd_drm_private *hdlcd = drm->dev_private;
> >+
> >+ if (hdlcd->fbdev) {
> >+ drm_fbdev_cma_hotplug_event(hdlcd->fbdev);
> >+ }
>
> nit: braces.
>
> >+}
>
> [...]
>
> >+static irqreturn_t hdlcd_irq(int irq, void *arg)
> >+{
> >+ struct drm_device *drm = arg;
> >+ struct hdlcd_drm_private *hdlcd = drm->dev_private;
> >+ unsigned long irq_status;
> >+
> >+ irq_status = hdlcd_read(hdlcd, HDLCD_REG_INT_STATUS);
> >+
> >+#ifdef CONFIG_DEBUG_FS
> >+ if (irq_status & HDLCD_INTERRUPT_UNDERRUN) {
> >+ atomic_inc(&hdlcd->buffer_underrun_count);
> >+ }
> >+ if (irq_status & HDLCD_INTERRUPT_DMA_END) {
> >+ atomic_inc(&hdlcd->dma_end_count);
> >+ }
> >+ if (irq_status & HDLCD_INTERRUPT_BUS_ERROR) {
> >+ atomic_inc(&hdlcd->bus_error_count);
> >+ }
> >+ if (irq_status & HDLCD_INTERRUPT_VSYNC) {
> >+ atomic_inc(&hdlcd->vsync_count);
> >+ }
>
> nit: braces again (it's only because I'm too lazy to remove the newbie
> checkpatch commit hook, and a manual merge of this into my SMMU dev tree
> made that throw a fit)
>
> >+#endif
> >+ if (irq_status & HDLCD_INTERRUPT_VSYNC) {
> >+ bool events_sent = false;
> >+ unsigned long flags;
> >+ struct drm_pending_vblank_event *e, *t;
> >+
> >+ drm_crtc_handle_vblank(&hdlcd->crtc);
> >+
> >+ spin_lock_irqsave(&drm->event_lock, flags);
> >+ list_for_each_entry_safe(e, t, &hdlcd->event_list, base.link) {
> >+ list_del(&e->base.link);
> >+ drm_crtc_send_vblank_event(&hdlcd->crtc, e);
> >+ events_sent = true;
> >+ }
> >+ if (events_sent)
> >+ drm_crtc_vblank_put(&hdlcd->crtc);
> >+ spin_unlock_irqrestore(&drm->event_lock, flags);
> >+ }
> >+
> >+ /* acknowledge interrupt(s) */
> >+ hdlcd_write(hdlcd, HDLCD_REG_INT_CLEAR, irq_status);
> >+
> >+ return IRQ_HANDLED;
> >+}
>
> Other than that though, it seems to do the job. I get a usable framebuffer
> console and can boot to an X desktop with at least the ancient 1600x1200 DVI
> monitor I have handy - the 1920x1080 HDMI one seems to get recognised OK but
> the monitor itself doesn't like the signal and just locks up until I unplug
> it, although I know that's more of a clock driver/firmware issue.
I have a TV that does the same. Yes, the SCPI clock that was picked for this
resolution is a standard one, but I bet that these monitors are slightly out
of spec. At least my TV lists two options for 1080p: one with 145MHz pixel
clock and another with 145.382MHz. But Linux decides to go interlaced anyway,
so I can't test without a hack in tda998x_drv.c.
Thanks for testing this.
Best regards,
Liviu
>
> Robin.
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists