lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Tue, 8 Dec 2015 21:44:13 -0800
From:	Doug Anderson <dianders@...omium.org>
To:	Julius Werner <jwerner@...omium.org>
Cc:	Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
	Andrew Morton <akpm@...ux-foundation.org>,
	Alessandro Zummo <a.zummo@...ertech.it>,
	Sonny Rao <sonnyrao@...omium.org>,
	Chris Zhong <zyw@...k-chips.com>,
	Heiko Stuebner <heiko@...ech.de>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	rtc-linux@...glegroups.com
Subject: Re: [PATCH v2] RTC: RK808: Work around hardware bug on November 31st

Julius,

On Mon, Dec 7, 2015 at 9:21 PM, Julius Werner <jwerner@...omium.org> wrote:
> In Fuzhou, China, the month of November seems to be having 31 days.
> That's nice and all (I'm sure you can get a lot more done in a year that
> way), but back here in other parts of the world we are not so lucky.
> Therefore, we need to compensate for these extra days existing only in
> the RTC's imagination when reading the time and dealing with alarms.
>
> This patch is not a perfect workaround -- it only keeps the time stable
> as long as the system is running or suspended. If the system is fully
> shut down in November and only booted back up in December, the system
> time may be incorrect and alarms that had been set before the shutdown
> may fire on the wrong day. We're trying to catch and recover from this
> by reading the RTC's last "shadow timestamp" (which only gets resynced
> when transitioning the GET_TIME control bit) to figure out when the
> system was shut down, but this is only reliable if no other code (e.g.
> firmware) has read the RTC in-between.
>
> Basic idea for the workaround:
>
> - Whenever we set the time, we assume that timestamp to be correct
>   (synced to the real world). We store a copy of it in memory as an
>   anchor point (where we know our calendar matched the real world).
> - Whenever we read the time, we can tell how many days of desync we have
>   by counting November/December transitions between the anchor timestamp
>   and the time read from the hardware. We adjust the hardware clock
>   accordingly to get back in sync (which also resets the anchor time).
> - Whenever we set an alarm, we adjust the alarm time backwards by the
>   amount of days that we know we will lag behind at that point (by
>   counting the November/December transitions between our anchor point
>   and the alarm). This way, we will wake up on the right real world date
>   even though we cannot make adjustments while suspended.
> - Whenever we read an alarm, we do the opposite (forward) adjustment for
>   the returned result to keep our outside interface free from this
>   madness (callers expect to be able to read back the alarm they wrote).
> - Whenever we set the system time (which adjusts the anchor point), we
>   read out the (adjusted) alarm time beforehand and write it (newly
>   adjusted) back afterwards. This way, system time and alarm time will
>   always stay on the same calendar (as long as we're able to keep track
>   of our anchor point, at least).

Thinking about all this: these's actually a totally different
alternative approach we could take if you wanted.  It would fix S5 and
avoid all the anchor stuff, unless I'm crazy.

Basically totally give up on the RTC time reflecting reality.  Add a
"real time to rk808" and "rk808 time to real time" function.  Always
use it when reading from rk808 and always use it when writing to
rk808.  Choose 2015 as the "truth" year if you want (or pick another
year).  In early 2016 the rk808 always contains 1 day back.  In 2017
the rk808 always contains 2 days back.  Etc, etc, etc.

The firmware would get confused, but ...


> Signed-off-by: Julius Werner <jwerner@...omium.org>
> ---
>  drivers/rtc/rtc-rk808.c | 282 ++++++++++++++++++++++++++++++++----------------
>  1 file changed, 190 insertions(+), 92 deletions(-)
>
> diff --git a/drivers/rtc/rtc-rk808.c b/drivers/rtc/rtc-rk808.c
> index 91ca0bc..2a6cd6f 100644
> --- a/drivers/rtc/rtc-rk808.c
> +++ b/drivers/rtc/rtc-rk808.c
> @@ -54,103 +54,30 @@ struct rk808_rtc {
>         struct rk808 *rk808;
>         struct rtc_device *rtc;
>         int irq;
> +       struct rtc_time anchor_time;    /* Last sync point with real world */

Is this ever Nov 31st?  Looks like it never is...

>  };
>
> -/* Read current time and date in RTC */
> -static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
> +/*
> + * RK808 has a hardware bug causing it to count 31 days in November. This
> + * function can calculate the amount of days that code needs to adjust for
> + * between two timestamps to compensate for this.

Document what this does if "from" is Nov 31st or if "to" is Nov 31st.


> + */
> +static int nov31st_transitions(struct rtc_time *from, struct rtc_time *to)

Review will be significantly easier if we break this up into two patches:

1. Brain-dead code movement.  Move rk808_rtc_readtime() and
rk808_rtc_set_time() with no functional changes.

2. This actual change.

That changed the diffstat of the important patch from:

 1 file changed, 190 insertions(+), 92 deletions(-)

...to...

 1 file changed, 118 insertions(+), 20 deletions(-)


...possibly you could even add a 3rd patch splitting out raw_read.  Not sure...


>  {
> -       struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
> -       struct rk808 *rk808 = rk808_rtc->rk808;
> -       u8 rtc_data[NUM_TIME_REGS];
> -       int ret;
> -
> -       /* Force an update of the shadowed registers right now */
> -       ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
> -                                BIT_RTC_CTRL_REG_RTC_GET_TIME,
> -                                BIT_RTC_CTRL_REG_RTC_GET_TIME);
> -       if (ret) {
> -               dev_err(dev, "Failed to update bits rtc_ctrl: %d\n", ret);
> -               return ret;
> -       }
> -
> -       /*
> -        * After we set the GET_TIME bit, the rtc time can't be read
> -        * immediately. So we should wait up to 31.25 us, about one cycle of
> -        * 32khz. If we clear the GET_TIME bit here, the time of i2c transfer
> -        * certainly more than 31.25us: 16 * 2.5us at 400kHz bus frequency.
> -        */
> -       ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
> -                                BIT_RTC_CTRL_REG_RTC_GET_TIME,
> -                                0);
> -       if (ret) {
> -               dev_err(dev, "Failed to update bits rtc_ctrl: %d\n", ret);
> -               return ret;
> -       }
> +       int extra_days = to->tm_year - from->tm_year;
>
> -       ret = regmap_bulk_read(rk808->regmap, RK808_SECONDS_REG,
> -                              rtc_data, NUM_TIME_REGS);
> -       if (ret) {
> -               dev_err(dev, "Failed to bulk read rtc_data: %d\n", ret);
> -               return ret;
> -       }
> +       /* Avoid adjusting anything for uninitialized timestamps */
> +       if (from->tm_mday == 0 || to->tm_mday == 0)
> +               return 0;
>
> -       tm->tm_sec = bcd2bin(rtc_data[0] & SECONDS_REG_MSK);
> -       tm->tm_min = bcd2bin(rtc_data[1] & MINUTES_REG_MAK);
> -       tm->tm_hour = bcd2bin(rtc_data[2] & HOURS_REG_MSK);
> -       tm->tm_mday = bcd2bin(rtc_data[3] & DAYS_REG_MSK);
> -       tm->tm_mon = (bcd2bin(rtc_data[4] & MONTHS_REG_MSK)) - 1;
> -       tm->tm_year = (bcd2bin(rtc_data[5] & YEARS_REG_MSK)) + 100;
> -       tm->tm_wday = bcd2bin(rtc_data[6] & WEEKS_REG_MSK);
> -       dev_dbg(dev, "RTC date/time %4d-%02d-%02d(%d) %02d:%02d:%02d\n",
> -               1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday,
> -               tm->tm_wday, tm->tm_hour , tm->tm_min, tm->tm_sec);
> +       if (from->tm_mon > 10)
> +               extra_days--;


Hmm, need to think about this a bit.  I'm bad at math like this, but
let me try an example

from = Nov (AKA 10) 30, 2015
to = Dec (AKA 11) 1, 2020

extra days = 6:
  Nov 31, 2015
  Nov 31, 2016
  Nov 31, 2017
  Nov 31, 2018
  Nov 31, 2019
  Nov 31, 2020

I think you'll do 20 - 15 + 1 = 6.  OK, good.

from = Nov (AKA 10) 30, 2015
to = Nov (AKA 10) 30, 2020

extra days = 5:
  Nov 31, 2015
  Nov 31, 2016
  Nov 31, 2017
  Nov 31, 2018
  Nov 31, 2019

You'll do 20 - 15 = 5.  OK Good.

from = Nov (AKA 10) 30, 2015
to = Nov (AKA 10) 31, 2015

You'll do 15 - 15 = 0.  Document.  I think this is OK.

from = Nov (AKA 10) 31, 2015
to = Dec (AKA 11) 1, 2015

You'll do 15 - 15 + 1= 1.  Document, though I think code never
actually does this because anchor is never Nov 31st.

from = Dec (AKA 11) 1, 2015
to = Nov (AKA 10) 31, 2016

You'll do 16 - 15 - 1 = 0.  Matches above.


>
> -       return ret;
> -}
> +       if (to->tm_mon > 10)
> +               extra_days++;
>
> -/* Set current time and date in RTC */
> -static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
> -{
> -       struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
> -       struct rk808 *rk808 = rk808_rtc->rk808;
> -       u8 rtc_data[NUM_TIME_REGS];
> -       int ret;
> -
> -       rtc_data[0] = bin2bcd(tm->tm_sec);
> -       rtc_data[1] = bin2bcd(tm->tm_min);
> -       rtc_data[2] = bin2bcd(tm->tm_hour);
> -       rtc_data[3] = bin2bcd(tm->tm_mday);
> -       rtc_data[4] = bin2bcd(tm->tm_mon + 1);
> -       rtc_data[5] = bin2bcd(tm->tm_year - 100);
> -       rtc_data[6] = bin2bcd(tm->tm_wday);
> -       dev_dbg(dev, "set RTC date/time %4d-%02d-%02d(%d) %02d:%02d:%02d\n",
> -               1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday,
> -               tm->tm_wday, tm->tm_hour , tm->tm_min, tm->tm_sec);
> -
> -       /* Stop RTC while updating the RTC registers */
> -       ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
> -                                BIT_RTC_CTRL_REG_STOP_RTC_M,
> -                                BIT_RTC_CTRL_REG_STOP_RTC_M);
> -       if (ret) {
> -               dev_err(dev, "Failed to update RTC control: %d\n", ret);
> -               return ret;
> -       }
> -
> -       ret = regmap_bulk_write(rk808->regmap, RK808_SECONDS_REG,
> -                               rtc_data, NUM_TIME_REGS);
> -       if (ret) {
> -               dev_err(dev, "Failed to bull write rtc_data: %d\n", ret);
> -               return ret;
> -       }
> -       /* Start RTC again */
> -       ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
> -                                BIT_RTC_CTRL_REG_STOP_RTC_M, 0);
> -       if (ret) {
> -               dev_err(dev, "Failed to update RTC control: %d\n", ret);
> -               return ret;
> -       }
> -       return 0;
> -}
> +       return extra_days;
> +};
>
>  /* Read alarm time and date in RTC */
>  static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
> @@ -159,7 +86,7 @@ static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
>         struct rk808 *rk808 = rk808_rtc->rk808;
>         u8 alrm_data[NUM_ALARM_REGS];
>         uint32_t int_reg;
> -       int ret;
> +       int ret, extra_days;
>
>         ret = regmap_bulk_read(rk808->regmap, RK808_ALARM_SECONDS_REG,
>                                alrm_data, NUM_ALARM_REGS);
> @@ -171,6 +98,19 @@ static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
>         alrm->time.tm_mon = (bcd2bin(alrm_data[4] & MONTHS_REG_MSK)) - 1;
>         alrm->time.tm_year = (bcd2bin(alrm_data[5] & YEARS_REG_MSK)) + 100;
>
> +       extra_days = nov31st_transitions(&rk808_rtc->anchor_time, &alrm->time);
> +       if (alrm->time.tm_mon == 10 && alrm->time.tm_mday == 31) {
> +               dev_warn(dev, "read HW alarm date as Nov 31, compensating\n");
> +               alrm->time.tm_mon = 11;
> +               alrm->time.tm_mday = 1 + extra_days;

But what is it's been 30+ years?!?!  :-P  Not that this is seriously a
problem, but you already handle this in the "else" case.  Why not just
set to 11/1 and get rid of the "else" below, so:

   ...
   alrm->time.tm_mon = 11;
   alrm->time.tm_mday = 1;
 }
 if (extra_days) {
   ...


> +       } else if (extra_days) {
> +               unsigned long time;
> +               dev_warn(dev, "compensating for %d Nov31 until HW alarm date\n",
> +                        extra_days);
> +               rtc_tm_to_time(&alrm->time, &time);
> +               rtc_time_to_tm(time + extra_days * 86400, &alrm->time);
> +       }
> +
>         ret = regmap_read(rk808->regmap, RK808_RTC_INT_REG, &int_reg);
>         if (ret) {
>                 dev_err(dev, "Failed to read RTC INT REG: %d\n", ret);
> @@ -215,7 +155,7 @@ static int rk808_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
>         struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
>         struct rk808 *rk808 = rk808_rtc->rk808;
>         u8 alrm_data[NUM_ALARM_REGS];
> -       int ret;
> +       int ret, extra_days;
>
>         ret = rk808_rtc_stop_alarm(rk808_rtc);
>         if (ret) {
> @@ -227,6 +167,19 @@ static int rk808_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
>                 alrm->time.tm_mday, alrm->time.tm_wday, alrm->time.tm_hour,
>                 alrm->time.tm_min, alrm->time.tm_sec);
>
> +       extra_days = nov31st_transitions(&rk808_rtc->anchor_time, &alrm->time);
> +       if (extra_days) {
> +               unsigned long time;
> +               dev_warn(dev, "writing HW alarm date adjusted for %d Nov31\n",
> +                        extra_days);
> +               rtc_tm_to_time(&alrm->time, &time);
> +               rtc_time_to_tm(time - extra_days * 86400, &alrm->time);
> +               /* Compensate in case the subtraction went back over Nov 31st */
> +               if (alrm->time.tm_mon == 10 &&
> +                   alrm->time.tm_mday == 31 - extra_days)
> +                       alrm->time.tm_mday++;   /* This can result in 31! */

Seems fishy somehow.  You should be able to come up with scenarios
where you need an alarm on 11/31 on each future year.  Here I think
you can only possibly get 11/31 if extra days == 1, right?

So if it is Nov 30, 2015 and we want alarm on Dec 6, 2020
extra days = 6:
  Nov 31, 2015
  Nov 31, 2016
  Nov 31, 2017
  Nov 31, 2018
  Nov 31, 2019
  Nov 31, 2020

I think we need to set the alarm for Nov 31st 2020, right?  Your
subtraction should get you to Nov 30th and you need to add an extra
day for that, but I don't _think_ your if test will.  Did I mess up?
As I said, I'm bad at this...


> +       }
> +
>         alrm_data[0] = bin2bcd(alrm->time.tm_sec);
>         alrm_data[1] = bin2bcd(alrm->time.tm_min);
>         alrm_data[2] = bin2bcd(alrm->time.tm_hour);
> @@ -250,6 +203,141 @@ static int rk808_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
>         return 0;
>  }
>
> +/* Set current time and date in RTC */
> +static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
> +{
> +       struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
> +       struct rk808 *rk808 = rk808_rtc->rk808;
> +       struct rtc_wkalrm alrm;
> +       u8 rtc_data[NUM_TIME_REGS];
> +       int ret;
> +
> +       /* Read out wake alarm with old Nov 31st adjustment */
> +       rk808_rtc_readalarm(dev, &alrm);
> +
> +       rtc_data[0] = bin2bcd(tm->tm_sec);
> +       rtc_data[1] = bin2bcd(tm->tm_min);
> +       rtc_data[2] = bin2bcd(tm->tm_hour);
> +       rtc_data[3] = bin2bcd(tm->tm_mday);
> +       rtc_data[4] = bin2bcd(tm->tm_mon + 1);
> +       rtc_data[5] = bin2bcd(tm->tm_year - 100);
> +       rtc_data[6] = bin2bcd(tm->tm_wday);
> +       dev_dbg(dev, "set RTC date/time %4d-%02d-%02d(%d) %02d:%02d:%02d\n",
> +               1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday,
> +               tm->tm_wday, tm->tm_hour , tm->tm_min, tm->tm_sec);
> +
> +       /* Stop RTC while updating the RTC registers */
> +       ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
> +                                BIT_RTC_CTRL_REG_STOP_RTC_M,
> +                                BIT_RTC_CTRL_REG_STOP_RTC_M);
> +       if (ret) {
> +               dev_err(dev, "Failed to update RTC control: %d\n", ret);
> +               return ret;
> +       }
> +
> +       ret = regmap_bulk_write(rk808->regmap, RK808_SECONDS_REG,
> +                               rtc_data, NUM_TIME_REGS);
> +       if (ret) {
> +               dev_err(dev, "Failed to bull write rtc_data: %d\n", ret);
> +               return ret;
> +       }
> +       /* Start RTC again */
> +       ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
> +                                BIT_RTC_CTRL_REG_STOP_RTC_M, 0);
> +       if (ret) {
> +               dev_err(dev, "Failed to update RTC control: %d\n", ret);
> +               return ret;
> +       }
> +
> +       /* Assume a newly set time is always correct (regardless of source) */
> +       rk808_rtc->anchor_time = *tm;
> +
> +       /* Write back wake alarm with new Nov 31st adjustment */
> +       rk808_rtc_setalarm(dev, &alrm);
> +
> +       return 0;
> +}
> +
> +/* Read time from static shadow registers (without updating) */
> +static int rk808_rtc_raw_read(struct device *dev, struct rtc_time *tm)
> +{
> +       struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
> +       struct rk808 *rk808 = rk808_rtc->rk808;
> +       u8 rtc_data[NUM_TIME_REGS];
> +       int ret;
> +
> +       ret = regmap_bulk_read(rk808->regmap, RK808_SECONDS_REG,
> +                              rtc_data, NUM_TIME_REGS);
> +       if (ret) {
> +               dev_err(dev, "Failed to bulk read rtc_data: %d\n", ret);
> +               return ret;
> +       }
> +
> +       tm->tm_sec = bcd2bin(rtc_data[0] & SECONDS_REG_MSK);
> +       tm->tm_min = bcd2bin(rtc_data[1] & MINUTES_REG_MAK);
> +       tm->tm_hour = bcd2bin(rtc_data[2] & HOURS_REG_MSK);
> +       tm->tm_mday = bcd2bin(rtc_data[3] & DAYS_REG_MSK);
> +       tm->tm_mon = (bcd2bin(rtc_data[4] & MONTHS_REG_MSK)) - 1;
> +       tm->tm_year = (bcd2bin(rtc_data[5] & YEARS_REG_MSK)) + 100;
> +       tm->tm_wday = bcd2bin(rtc_data[6] & WEEKS_REG_MSK);
> +       dev_dbg(dev, "RTC date/time %4d-%02d-%02d(%d) %02d:%02d:%02d\n",
> +               1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday,
> +               tm->tm_wday, tm->tm_hour , tm->tm_min, tm->tm_sec);
> +
> +       return ret;
> +}
> +
> +/* Read current time and date in RTC */
> +static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
> +{
> +       struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
> +       struct rk808 *rk808 = rk808_rtc->rk808;
> +       int ret, extra_days;
> +
> +       /* Force an update of the shadowed registers right now */
> +       ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
> +                                BIT_RTC_CTRL_REG_RTC_GET_TIME,
> +                                BIT_RTC_CTRL_REG_RTC_GET_TIME);
> +       if (ret) {
> +               dev_err(dev, "Failed to update bits rtc_ctrl: %d\n", ret);
> +               return ret;
> +       }
> +
> +       /*
> +        * After we set the GET_TIME bit, the rtc time can't be read
> +        * immediately. So we should wait up to 31.25 us, about one cycle of
> +        * 32khz. If we clear the GET_TIME bit here, the time of i2c transfer
> +        * certainly more than 31.25us: 16 * 2.5us at 400kHz bus frequency.
> +        */
> +       ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
> +                                BIT_RTC_CTRL_REG_RTC_GET_TIME,
> +                                0);
> +       if (ret) {
> +               dev_err(dev, "Failed to update bits rtc_ctrl: %d\n", ret);
> +               return ret;
> +       }
> +
> +       ret = rk808_rtc_raw_read(dev, tm);
> +       if (ret)
> +               return ret;
> +
> +       extra_days = nov31st_transitions(&rk808_rtc->anchor_time, tm);
> +       if (tm->tm_mon == 10 && tm->tm_mday == 31) {
> +               dev_warn(dev, "read Nov 31, correcting to Dec 1 (HW bug)\n");
> +               tm->tm_mon = 11;
> +               tm->tm_mday = 1 + extra_days; /* don't S2R for over 30 years! */
> +               rk808_rtc_set_time(dev, tm);
> +       } else if (extra_days) {
> +               unsigned long time;
> +               dev_warn(dev, "compensating for %d skips over Nov 31\n",
> +                        extra_days);
> +               rtc_tm_to_time(tm, &time);
> +               rtc_time_to_tm(time + extra_days * 86400, tm);
> +               rk808_rtc_set_time(dev, tm);
> +       }
> +       return ret;
> +}
> +
>  static int rk808_rtc_alarm_irq_enable(struct device *dev,
>                                       unsigned int enabled)
>  {
> @@ -364,6 +452,16 @@ static int rk808_rtc_probe(struct platform_device *pdev)
>                         return ret;
>         }
>
> +       /*
> +        * Try to initialize anchor point by reading "last read" shadow
> +        * timestamp, to catch Nov 31st transitions that happened while shut
> +        * down. This only works if no other code (e.g. firmware) has
> +        * transitioned GET_TIME before this point.
> +        */
> +       ret = rk808_rtc_raw_read(&pdev->dev, &rk808_rtc->anchor_time);
> +       if (ret || rtc_valid_tm(&rk808_rtc->anchor_time))
> +               rk808_rtc->anchor_time.tm_mday = 0;     /* invalidate */

Ah, the rtc_valid_tm() keeps the anchor from every being Nov 31st.  Got it.

> +
>         /* set init time */
>         ret = rk808_rtc_readtime(&pdev->dev, &tm);
>         if (ret) {

OK, that's a first pass anyway...

Thanks for taking this on!  :)

-Doug
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists