lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <566896B6.9010204@gmail.com>
Date:	Wed, 9 Dec 2015 13:01:42 -0800
From:	Florian Fainelli <f.fainelli@...il.com>
To:	Simon Arlott <simon@...e.lp0.eu>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	Brian Norris <computersforpeace@...il.com>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	David Woodhouse <dwmw2@...radead.org>,
	linux-mtd@...ts.infradead.org
Cc:	Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	bcm-kernel-feedback-list@...adcom.com,
	Kamal Dasu <kdasu.kdev@...il.com>,
	Jonas Gorski <jogo@...nwrt.org>
Subject: Re: [PATCH linux-next (v2) 1/3] mtd: brcmnand: Add brcm,bcm6368-nand
 device tree binding

Le 09/12/2015 12:40, Simon Arlott a écrit :
> Add device tree binding for NAND on the BCM6368.
> 
> The BCM6368 has a NAND interrupt register with combined status and enable
> registers. It also requires a clock, so add an optional clock to the
> common brcmnand binding.
> 

Reviewed-by: Florian Fainelli <f.fainelli@...il.com>

> Signed-off-by: Simon Arlott <simon@...e.lp0.eu>
> ---
> Changed "nand-intr-base" reg name to "nand-int-base".
> 
>  .../devicetree/bindings/mtd/brcm,brcmnand.txt      | 32 ++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
> index 4ff7128..ebfa6fc 100644
> --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
> +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
> @@ -45,6 +45,8 @@ Required properties:
>  - #size-cells      : <0>
>  
>  Optional properties:
> +- clock                     : reference to the clock for the NAND controller
> +- clock-names               : "nand" (required for the above clock)
>  - brcm,nand-has-wp          : Some versions of this IP include a write-protect
>                                (WP) control bit. It is always available on >=
>                                v7.0. Use this property to describe the rare
> @@ -72,6 +74,12 @@ we define additional 'compatible' properties and associated register resources w
>         and enable registers
>       - reg-names: (required) "nand-int-base"
>  
> +   * "brcm,nand-bcm6368"
> +     - compatible: should contain "brcm,nand-bcm<soc>", "brcm,nand-bcm6368"
> +     - reg: (required) the 'NAND_INTR_BASE' register range, with combined status
> +       and enable registers, and boot address registers
> +     - reg-names: (required) "nand-int-base"
> +
>     * "brcm,nand-iproc"
>       - reg: (required) the "IDM" register range, for interrupt enable and APB
>         bus access endianness configuration, and the "EXT" register range,
> @@ -148,3 +156,27 @@ nand@...42800 {
>  		};
>  	};
>  };
> +
> +nand@...00200 {
> +	compatible = "brcm,nand-bcm63168", "brcm,nand-bcm6368",
> +		"brcm,brcmnand-v4.0", "brcm,brcmnand";
> +	reg = <0x10000200 0x180>,
> +	      <0x10000600 0x200>,
> +	      <0x100000b0 0x10>;
> +	reg-names = "nand", "nand-cache", "nand-intr-base";
> +	interrupt-parent = <&periph_intc>;
> +	interrupts = <50>;
> +	clocks = <&periph_clk 20>;
> +	clock-names = "nand";
> +
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	nand0: nandcs@0 {
> +		compatible = "brcm,nandcs";
> +		reg = <0>;
> +		nand-on-flash-bbt;
> +		nand-ecc-strength = <1>;
> +		nand-ecc-step-size = <512>;
> +	};
> +};
> 


-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ