[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20151210073756.GA11966@pengutronix.de>
Date: Thu, 10 Dec 2015 08:37:56 +0100
From: Sascha Hauer <s.hauer@...gutronix.de>
To: Gregory CLEMENT <gregory.clement@...e-electrons.com>
Cc: "David S. Miller" <davem@...emloft.net>,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
Nicolas Ferre <nicolas.ferre@...el.com>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>
Subject: Re: [PATCH] net/macb: add support for resetting PHY using GPIO
Hi Gregory,
On Wed, Dec 09, 2015 at 06:49:43PM +0100, Gregory CLEMENT wrote:
> With device tree it is no more possible to reset the PHY at board
> level. Furthermore, doing in the driver allow to power down the PHY when
> the network interface is no more used.
>
> The patch introduces a new optional property "phy-reset-gpio" inspired
> from the one use for the FEC.
I don't think it's a good idea to further extend the usage of this
binding. The driver should use the phy-handle property and
of_phy_connect() which gives you a proper device node for the phy. Then
the phy device node should get the reset gpio. I know it's more work,
but doing it like this gives you additional goodies like proper handling
of the max-speed property, a fixed-link if necessary and picking the
correct phy if there are muliple phys on the bus.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists