| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1449766729-435-4-git-send-email-b.zolnierkie@samsung.com>
Date: Thu, 10 Dec 2015 17:58:45 +0100
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: Thomas Abraham <thomas.ab@...sung.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Mike Turquette <mturquette@...libre.com>,
Kukjin Kim <kgene.kim@...sung.com>,
Kukjin Kim <kgene@...nel.org>,
Viresh Kumar <viresh.kumar@...aro.org>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Ben Gamari <ben@...rt-cactus.org>
Cc: Tomasz Figa <tomasz.figa@...il.com>,
Lukasz Majewski <l.majewski@...sung.com>,
Heiko Stuebner <heiko@...ech.de>,
Chanwoo Choi <cw00.choi@...sung.com>,
Kevin Hilman <khilman@...aro.org>,
Javier Martinez Canillas <javier@....samsung.com>,
Tobias Jakobi <tjakobi@...h.uni-bielefeld.de>,
Anand Moon <linux.amoon@...il.com>,
linux-samsung-soc@...r.kernel.org, linux-pm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
b.zolnierkie@...sung.com, Doug Anderson <dianders@...omium.org>,
Andreas Faerber <afaerber@...e.de>
Subject: [PATCH v5 3/7] ARM: dts: Exynos542x/5800: add CPU OPP properties
From: Thomas Abraham <thomas.ab@...sung.com>
For Exynos542x/5800 platforms, add CPU operating points
for migrating from Exynos specific cpufreq driver to using
generic cpufreq driver.
Changes by Bartlomiej:
- split Exynos5420 support from the original patch
- merged Exynos5422 fixes from Ben
Changes by Ben Gamari:
- Port to operating-points-v2
Cc: Kukjin Kim <kgene.kim@...sung.com>
Cc: Doug Anderson <dianders@...omium.org>
Cc: Javier Martinez Canillas <javier@....samsung.com>
Cc: Andreas Faerber <afaerber@...e.de>
Signed-off-by: Thomas Abraham <thomas.ab@...sung.com>
Signed-off-by: Ben Gamari <ben@...rt-cactus.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
---
arch/arm/boot/dts/exynos5420.dtsi | 122 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos5422-cpus.dtsi | 10 +++
2 files changed, 132 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 48a0a55..616c2d0 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -50,6 +50,116 @@
usbdrdphy1 = &usbdrd_phy1;
};
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+ opp@...0000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1250000>;
+ clock-latency-ns = <140000>;
+ };
+ opp@...0000000 {
+ opp-hz = /bits/ 64 <1700000000>;
+ opp-microvolt = <1212500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@...0000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <1175000>;
+ clock-latency-ns = <140000>;
+ };
+ opp@...0000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1137500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@...0000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt = <1112500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@...0000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1062500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@...0000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1037500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@...0000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1012500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@...0000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = < 987500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@...000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = < 962500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@...000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = < 937500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@...000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = < 912500>;
+ clock-latency-ns = <140000>;
+ };
+ };
+
+ cpu1_opp_table: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+ opp@...0000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1275000>;
+ clock-latency-ns = <140000>;
+ };
+ opp@...0000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1212500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@...0000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1162500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@...0000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1112500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@...000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = <1062500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@...000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1025000>;
+ clock-latency-ns = <140000>;
+ };
+ opp@...000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <975000>;
+ clock-latency-ns = <140000>;
+ };
+ opp@...000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <937500>;
+ clock-latency-ns = <140000>;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -58,8 +168,11 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x0>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu-cluster.0";
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu1: cpu@1 {
@@ -68,6 +181,7 @@
reg = <0x1>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu2: cpu@2 {
@@ -76,6 +190,7 @@
reg = <0x2>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu3: cpu@3 {
@@ -84,14 +199,18 @@
reg = <0x3>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu4: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x100>;
+ clocks = <&clock CLK_KFC_CLK>;
+ clock-names = "cpu-cluster.1";
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
+ operating-points-v2 = <&cpu1_opp_table>;
};
cpu5: cpu@101 {
@@ -100,6 +219,7 @@
reg = <0x101>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
+ operating-points-v2 = <&cpu1_opp_table>;
};
cpu6: cpu@102 {
@@ -108,6 +228,7 @@
reg = <0x102>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
+ operating-points-v2 = <&cpu1_opp_table>;
};
cpu7: cpu@103 {
@@ -116,6 +237,7 @@
reg = <0x103>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
+ operating-points-v2 = <&cpu1_opp_table>;
};
};
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
index b7f60c8..9a5131d 100644
--- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -20,8 +20,10 @@
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x100>;
+ clocks = <&clock CLK_KFC_CLK>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
+ operating-points-v2 = <&cpu1_opp_table>;
};
&cpu1 {
@@ -30,6 +32,7 @@
reg = <0x101>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
+ operating-points-v2 = <&cpu1_opp_table>;
};
&cpu2 {
@@ -38,6 +41,7 @@
reg = <0x102>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
+ operating-points-v2 = <&cpu1_opp_table>;
};
&cpu3 {
@@ -46,14 +50,17 @@
reg = <0x103>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
+ operating-points-v2 = <&cpu1_opp_table>;
};
&cpu4 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x0>;
+ clocks = <&clock CLK_ARM_CLK>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
&cpu5 {
@@ -62,6 +69,7 @@
reg = <0x1>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
&cpu6 {
@@ -70,6 +78,7 @@
reg = <0x2>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
&cpu7 {
@@ -78,4 +87,5 @@
reg = <0x3>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists