linux-kernel - Re: [PATCH linux-next] mtd: part: Add BCM962368 CFE partitioning support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <5669B965.5030105@gmail.com>
Date:	Thu, 10 Dec 2015 09:41:57 -0800
From:	Florian Fainelli <f.fainelli@...il.com>
To:	Simon Arlott <simon@...e.lp0.eu>,
	David Woodhouse <dwmw2@...radead.org>,
	Brian Norris <computersforpeace@...il.com>
Cc:	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	MTD Maling List <linux-mtd@...ts.infradead.org>,
	Jonas Gorski <jogo@...nwrt.org>,
	bcm-kernel-feedback-list <bcm-kernel-feedback-list@...adcom.com>
Subject: Re: [PATCH linux-next] mtd: part: Add BCM962368 CFE partitioning
 support

Le 09/12/2015 13:55, Simon Arlott a écrit :
> Add partitioning support for BCM963268 boards with CFE bootloaders.
> The following partitions are defined:
>   "boot":           CFE and nvram data
>   "rootfs":         Currently selected rootfs
>   "data":           Configuration data
>   "rootfs1_update": Container for the whole flash area used
>                     for the first rootfs to allow it to be
>                     updated.
>   "rootfs2_update": Container for the whole flash area used
>                     for the second rootfs to allow it to be
>                     updated.
>   "rootfs_other":   The other (not currently selected) rootfs
> 
> Example:
> [    1.904302] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
> [    1.911000] nand: Macronix NAND 128MiB 3,3V 8-bit
> [    1.915855] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
> [    1.923797] bcm6368_nand 10000200.nand: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
> [    1.936994] Bad block table found at page 65472, version 0x01
> [    1.944121] Bad block table found at page 65408, version 0x01
> [    1.951166] nand_read_bbt: bad block at 0x000007480000
> [    1.990043] bcm963268part: rootfs1: CFE boot tag found at 0x20000 with version 6, board type 963168VX and sequence number 2
> [    2.003060] bcm963268part: rootfs2: CFE boot tag found at 0x4000000 with version 6, board type 963168VX and sequence number 1
> [    2.015159] bcm963268part: CFE bootline selected latest image rootfs1
> [    2.022080] 6 bcm963268part partitions found on MTD device brcmnand.0
> [    2.042659] Creating 6 MTD partitions on "brcmnand.0":
> [    2.048025] 0x000000000000-0x000000020000 : "boot"
> [    2.062134] 0x000000040000-0x000001120000 : "rootfs"
> [    2.077632] 0x000007b00000-0x000007f00000 : "data"
> [    2.091363] 0x000000020000-0x000003ac0000 : "rootfs1_update"
> [    2.106228] 0x000004000000-0x000007ac0000 : "rootfs2_update"
> [    2.121093] 0x000004020000-0x000005060000 : "rootfs_other"
> 
> The nvram contains the offset and size of the boot, rootfs1, rootfs2
> and data partitions. The presence of CFE and nvram is verified by
> reading from the boot partition which is assumed to be at offset 0
> and the process aborts if the nvram read indicates that this is not
> the case.
> 
> There is bcm_tag information at the start of each rootfs that is used
> to determine which rootfs is newer and what its real offset/size is.
> 
> The CFE bootline or nvram partition number is used to select a rootfs.
> 
> Signed-off-by: Simon Arlott <simon@...e.lp0.eu>
> ---
> I'm aware that this is not compatible with the mtd partition/device tree
> reorganisation patches and will rework the patch when this is committed.
> 
> Should I try to put the "struct bcm963268_nvram" in a common header file
> for all 63xx SoCs? It's hard to know if there is only one purpose for
> each byte in the nvram across all SoCs or whether it would be a complex
> type involving unions for different SoCs.

Even harder is knowing what vendors ended up using in the reserved
fields when they decided on a particular reference design and started to
build their product...

I would look at what exists in the OpenWrt tree and create e.g:
include/uapi/linux/bcm963xx_nvram.h or something along these lines so we
have at least a central location where the (potentially) different NVRAM
formats for imagetag are there.

> 
> The partitioning needs to match what exists already for this board so
> that it's practical to swap between an flash image released by the
> manufacturer/distributor of the hardware, and a custom image based on
> the latest vanilla kernel.
> 
>  drivers/mtd/Kconfig         |  21 +++
>  drivers/mtd/Makefile        |   1 +
>  drivers/mtd/bcm963268part.c | 373 ++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 395 insertions(+)
>  create mode 100644 drivers/mtd/bcm963268part.c

What motivated created a separate partition parser rather then using the
extended the existing one?

I would imagine that, at some point, the partition parser could know
what kind of flash it needs to parse: SPI/P-NOR or NAND, and based on
that, do an appropriate definition?
-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/