[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1449819921-18464-3-git-send-email-xuejiancheng@huawei.com>
Date: Fri, 11 Dec 2015 15:45:16 +0800
From: Jiancheng Xue <xuejiancheng@...wei.com>
To: <mturquette@...libre.com>, <sboyd@...eaurora.org>,
<robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<linux@....linux.org.uk>, <khilman@...aro.org>, <arnd@...db.de>,
<olof@...om.net>, <xuwei5@...ilicon.com>,
<haojian.zhuang@...aro.org>, <zhangfei.gao@...aro.org>,
<bintian.wang@...wei.com>
CC: <linux-kernel@...r.kernel.org>, <linux-clk@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <yanhaifeng@...ilicon.com>,
<yanghongwei@...ilicon.com>, <suwenping@...ilicon.com>,
<ml.yang@...ilicon.com>, <gaofei@...ilicon.com>,
<zhangzhenxing@...ilicon.com>, <xuejiancheng@...ilicon.com>,
Jiancheng Xue <xuejiancheng@...wei.com>
Subject: [PATCH v3 2/7] clk: hisilicon: add dt-binding document for Hi3519 CRG
add dt-binding document for Hi3519 CRG block
Signed-off-by: Jiancheng Xue <xuejiancheng@...wei.com>
---
.../devicetree/bindings/clock/hi3519-crg.txt | 46 ++++++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/hi3519-crg.txt
diff --git a/Documentation/devicetree/bindings/clock/hi3519-crg.txt b/Documentation/devicetree/bindings/clock/hi3519-crg.txt
new file mode 100644
index 0000000..e0d30a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hi3519-crg.txt
@@ -0,0 +1,46 @@
+* Hisilicon Hi3519 Clock and Reset Generator(CRG)
+
+The Hi3519 CRG module provides clock and reset signals to various
+controllers within the SoC.
+
+This binding uses the following bindings:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+ Documentation/devicetree/bindings/reset/reset.txt
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "hisilicon,hi3519-crg" - controller compatible with Hi3519 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3519-clock.h>.
+
+- #reset-cells: should be 2.
+
+A reset signal can be controlled by writing a bit register in the CRG module.
+The reset specifier consists of two cells. The first cell represents the
+register offset relative to the base address. The second cell represents the
+bit index in the register.
+
+Example: CRG nodes
+CRG: clock-reset-controller {
+ compatible = "hisilicon,hi3519-crg";
+ reg = <0x12010000 0x10000>;
+ #clock-cells = <1>;
+ #reset-cells = <2>;
+};
+
+Example: consumer nodes
+i2c0: i2c@...2110000 {
+ compatible = "hisilicon,hi3519-i2c";
+ reg = <0x12110000 0x1000>;
+ clocks = <&CRG HI3519_I2C0_RST>;*/
+ resets = <&CRG 0xE4 0>;
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists