| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20151213070800.GA3832@kroah.com>
Date: Sat, 12 Dec 2015 23:08:00 -0800
From: Greg KH <gregkh@...uxfoundation.org>
To: Frederik Völkel <frederik.voelkel@....de>
Cc: linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org,
jslaby@...e.com, linux-kernel@...cs.fau.de,
Lukas Braun <lukas.braun@....de>
Subject: Re: [PATCH 6/9] drivers: tty: 68328serial.c: Use tabs for indentation
On Fri, Dec 11, 2015 at 11:36:06AM +0100, Frederik Völkel wrote:
> The patch replaces the spaces used for indentation at some points with
> tabs.
>
> Signed-off-by: Frederik Völkel <frederik.voelkel@....de>
> Signed-off-by: Lukas Braun <lukas.braun@....de>
> ---
> drivers/tty/serial/68328serial.c | 82 ++++++++++++++++++++--------------------
> 1 file changed, 41 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
> index 0982c1a..22f52e0 100644
> --- a/drivers/tty/serial/68328serial.c
> +++ b/drivers/tty/serial/68328serial.c
> @@ -228,17 +228,17 @@ static int rs_put_char(char ch)
> unsigned long flags;
> int loops = 0;
>
> - local_irq_save(flags);
> + local_irq_save(flags);
>
> while (!(UTX & UTX_TX_AVAIL) && (loops < 1000)) {
> - loops++;
> - udelay(5);
> - }
> + loops++;
> + udelay(5);
> + }
>
> UTX_TXDATA = ch;
> - udelay(5);
> - local_irq_restore(flags);
> - return 1;
> + udelay(5);
> + local_irq_restore(flags);
> + return 1;
> }
>
> static void rs_start(struct tty_struct *tty)
> @@ -268,7 +268,7 @@ static void receive_chars(struct m68k_serial *info, unsigned short rx)
>
> /*
> * This do { } while() loop will get ALL chars out of Rx FIFO
> - */
> + */
> #ifndef CONFIG_XCOPILOT_BUGS
> do {
> #endif
> @@ -400,7 +400,7 @@ static int startup(struct m68k_serial *info, struct tty_struct *tty)
> */
> #ifdef USE_INTS
> uart->ustcnt = USTCNT_UEN | USTCNT_RXEN |
> - USTCNT_RX_INTR_MASK | USTCNT_TX_INTR_MASK;
> + USTCNT_RX_INTR_MASK | USTCNT_TX_INTR_MASK;
> #else
> uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK;
> #endif
> @@ -473,24 +473,24 @@ struct {
> };
> #else
> hw_baud_table[18] = {
> - {0, 0}, /* 0 */
> - {0, 0}, /* 50 */
> - {0, 0}, /* 75 */
> - {0, 0}, /* 110 */
> - {0, 0}, /* 134 */
> - {0, 0}, /* 150 */
> - {0, 0}, /* 200 */
> - {0, 0}, /* 300 */
> - {7, 0x26}, /* 600 */
> - {6, 0x26}, /* 1200 */
> - {0, 0}, /* 1800 */
> - {5, 0x26}, /* 2400 */
> - {4, 0x26}, /* 4800 */
> - {3, 0x26}, /* 9600 */
> - {2, 0x26}, /* 19200 */
> - {1, 0x26}, /* 38400 */
> - {0, 0x26}, /* 57600 */
> - {1, 0x38}, /* 115200 */
> + {0, 0}, /* 0 */
> + {0, 0}, /* 50 */
> + {0, 0}, /* 75 */
> + {0, 0}, /* 110 */
> + {0, 0}, /* 134 */
> + {0, 0}, /* 150 */
> + {0, 0}, /* 200 */
> + {0, 0}, /* 300 */
> + {7, 0x26}, /* 600 */
> + {6, 0x26}, /* 1200 */
> + {0, 0}, /* 1800 */
> + {5, 0x26}, /* 2400 */
> + {4, 0x26}, /* 4800 */
> + {3, 0x26}, /* 9600 */
> + {2, 0x26}, /* 19200 */
> + {1, 0x26}, /* 38400 */
> + {0, 0x26}, /* 57600 */
> + {1, 0x38}, /* 115200 */
> };
> #endif
> /* rate = 1036800 / ((65 - prescale) * (1<<divider)) */
> @@ -516,9 +516,9 @@ static void change_speed(struct m68k_serial *info, struct tty_struct *tty)
> uart->ustcnt = ustcnt & ~USTCNT_TXEN;
>
> i = cflag & CBAUD;
> - if (i & CBAUDEX) {
> - i = (i & ~CBAUDEX) + B38400;
> - }
> + if (i & CBAUDEX) {
> + i = (i & ~CBAUDEX) + B38400;
> + }
>
> uart->ubaud = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) |
> PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale);
> @@ -907,16 +907,16 @@ static int get_lsr_info(struct m68k_serial *info, unsigned int *value)
> static void send_break(struct m68k_serial *info, unsigned int duration)
> {
> m68328_uart *uart = &uart_addr[info->line];
> - unsigned long flags;
> - if (!info->port)
> - return;
> - local_irq_save(flags);
> + unsigned long flags;
> + if (!info->port)
> + return;
> + local_irq_save(flags);
> #ifdef USE_INTS
> uart->utx.w |= UTX_SEND_BREAK;
> msleep_interruptible(duration);
> uart->utx.w &= ~UTX_SEND_BREAK;
> #endif
> - local_irq_restore(flags);
> + local_irq_restore(flags);
> }
>
> static int rs_ioctl(struct tty_struct *tty,
> @@ -1206,7 +1206,7 @@ rs68328_init(void)
> rs_interrupt,
> 0,
> "M68328_UART", info))
> - panic("Unable to attach 68328 serial interrupt\n");
> + panic("Unable to attach 68328 serial interrupt\n");
>
> tty_port_link_device(&info->tport, serial_driver, i);
> }
> @@ -1295,11 +1295,11 @@ void m68328_console_write (struct console *co, const char *str,
> {
> if (!m68328_console_initted)
> m68328_set_baud();
> - while (count--) {
> - if (*str == '\n')
> - rs_put_char('\r');
> - rs_put_char(*str++);
> - }
> + while (count--) {
> + if (*str == '\n')
> + rs_put_char('\r');
> + rs_put_char(*str++);
This line should also be indented one more tab, right?
> + }
Please fix up and resend.
thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists