| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <A765B125120D1346A63912DDE6D8B6310BF54200@NTXXIAMBX02.xacn.micron.com>
Date: Mon, 14 Dec 2015 03:55:51 +0000
From: Bean Huo 霍斌斌 (beanhuo)
<beanhuo@...ron.com>
To: Richard Weinberger <richard@....at>,
Artem Bityutskiy <dedekind1@...il.com>,
Adrian Hunter <adrian.hunter@...el.com>,
Brian Norris <computersforpeace@...il.com>
CC: "linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Boris Brezillon" <boris.brezillon@...e-electrons.com>
Subject: RE: [PATCH 1/1] fs:ubifs:recovery:fixup UBIFS cannot recover master
node issue
Dear Richard
> Bean,
>
> Am 11.12.2015 um 09:26 schrieb Bean Huo 霍斌斌 (beanhuo):
> > For MLC NAND, paired page issue is now a common known issue.
> > This patch is just for master node cannot be recovered while there
> > will two pages be damaged in one single master node block.
> > As for this patch, if there are more than one page data in master node
> > block being damaged, and as long as exist one uncorrupted master node
> > block, master node will be recovered.
>
> So, this patch is part if a larger patch series to make UBIFS MLC aware?
No, this is not one part of my path series, just a single and dedicated to
Master node.
> > This patch has been tested on Micron MLC NAND MT29F32G08CBADAWP.
> > Issue descripted:
> > http://lists.infradead.org/pipermail/linux-mtd/2015-November/063016.ht
> > ml
> >
> > Signed-off-by: Bean Huo <beanhuo@...ron.com>
> > ---
> > fs/ubifs/recovery.c | 75
> > ++++++++++++++++++++++++++++++++++-------------------
> > 1 file changed, 49 insertions(+), 26 deletions(-)
> >
> > diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c index
> > 695fc71..e3154e6 100644
> > --- a/fs/ubifs/recovery.c
> > +++ b/fs/ubifs/recovery.c
> > @@ -128,7 +128,7 @@ static int get_master_node(const struct ubifs_info
> *c, int lnum, void **pbuf,
> > while (offs + UBIFS_MST_NODE_SZ <= c->leb_size) {
> > struct ubifs_ch *ch = buf;
> >
> > - if (le32_to_cpu(ch->magic) != UBIFS_NODE_MAGIC)
> > + if (le32_to_cpu(ch->magic) == 0xFFFFFFFF)
>
> The purpose of this check was to trigger upon garbage data (including 0xFF).
> Now you only check for 0xFF bytes.
>
For Master node block, just last page data is valid, so I think( I am limited on UBIFS knowledge, maybe I am wrong),
UBIFS should search for last page that not be programed, then search last valid master node page.
In case of there is one random data page, but last page of master block is a valid master node.
unless we can make sure that don't exist this scenario.
> > break;
> > offs += sz;
> > buf += sz;
> > @@ -137,37 +137,40 @@ static int get_master_node(const struct
> ubifs_info *c, int lnum, void **pbuf,
> > /* See if there was a valid master node before that */
> > if (offs) {
> > int ret;
> > -
> > +retry:
> > offs -= sz;
> > buf -= sz;
> > len += sz;
> > ret = ubifs_scan_a_node(c, buf, len, lnum, offs, 1);
> > - if (ret != SCANNED_A_NODE && offs) {
> > - /* Could have been corruption so check one place back */
> > - offs -= sz;
> > - buf -= sz;
> > - len += sz;
> > - ret = ubifs_scan_a_node(c, buf, len, lnum, offs, 1);
> > - if (ret != SCANNED_A_NODE)
> > - /*
> > - * We accept only one area of corruption because
> > - * we are assuming that it was caused while
> > - * trying to write a master node.
> > - */
> > - goto out_err;
> > - }
> > - if (ret == SCANNED_A_NODE) {
> > - struct ubifs_ch *ch = buf;
> > -
> > - if (ch->node_type != UBIFS_MST_NODE)
> > + if (ret != SCANNED_A_NODE) {
> > + /* Could have been corruption so check more
> > + * place back. We accept two areas of corruption
> > + * because we are assuming that for MLC NAND,it
> > + * was caused while trying to write a lower
> > + * page, upper page being damaged.
> > + */
> > + if (offs > 0)
> > + goto retry;
> > + else
> > goto out_err;
> > + }
> > + if (ret == SCANNED_A_NODE) {
> > + struct ubifs_ch *ch = buf;
> > +
> > + if (ch->node_type != UBIFS_MST_NODE) {
> > + if (offs)
> > + goto retry;
> > + else
> > + goto out_err;
> > + }
>
> Here you kill another sanity check.
Here should be what type of check? Can you give me some suggestions?
> > dbg_rcvry("found a master node at %d:%d", lnum, offs);
> > *mst = buf;
> > offs += sz;
> > buf += sz;
> > len -= sz;
> > - }
> > + }
> > }
> > +
>
> Useless line break. :)
This will be improved in next version.
> > /* Check for corruption */
> > if (offs < c->leb_size) {
> > if (!is_empty(buf, min_t(int, len, sz))) { @@ -178,10 +181,6 @@
> > static int get_master_node(const struct ubifs_info *c, int lnum, void **pbuf,
> > buf += sz;
> > len -= sz;
> > }
> > - /* Check remaining empty space */
> > - if (offs < c->leb_size)
> > - if (!is_empty(buf, len))
> > - goto out_err;
>
> Another check gone. :(
Yes, this check should add again, that is be more reasonable.
> > *pbuf = sbuf;
> > return 0;
> >
> > @@ -236,7 +235,7 @@ out:
> > int ubifs_recover_master_node(struct ubifs_info *c) {
> > void *buf1 = NULL, *buf2 = NULL, *cor1 = NULL, *cor2 = NULL;
> > - struct ubifs_mst_node *mst1 = NULL, *mst2 = NULL, *mst;
> > + struct ubifs_mst_node *mst1 = NULL, *mst2 = NULL, *mst = NULL;
> > const int sz = c->mst_node_alsz;
> > int err, offs1, offs2;
> >
> > @@ -280,6 +279,28 @@ int ubifs_recover_master_node(struct ubifs_info
> *c)
> > if (cor1)
> > goto out_err;
> > mst = mst1;
> > + } else if (offs2 + sz != offs1) {
> > + if (le32_to_cpu(mst1->ch.sqnum) >
> > + le32_to_cpu(mst2->ch.sqnum)) {
> > + /*
> > + * 1st LEB written, occurred power
> > + * loss while writing 2nd LEB.
> > + */
> > + if (cor1)
> > + goto out_err;
> > + mst = mst1;
> > + } else if (le32_to_cpu(mst1->ch.sqnum) <
> > + le32_to_cpu(mst2->ch.sqnum)) {
> > + /* While writing 1st LEB, occurred power loss */
> > + if (!cor2) {
> > + if (mst2->flags &
> > + cpu_to_le32(UBIFS_MST_DIRTY))
> > + mst = mst2;
> > + else
> > + goto out_err;
> > + } else
> > + goto out_err;
> > + }
> > } else
> > goto out_err;
> > } else {
> > @@ -305,6 +326,8 @@ int ubifs_recover_master_node(struct ubifs_info *c)
> > mst = mst2;
> > }
> >
> > + if (mst == NULL)
> > + goto out_err;
> > ubifs_msg(c, "recovered master node from LEB %d",
> > (mst == mst1 ? UBIFS_MST_LNUM : UBIFS_MST_LNUM + 1));
>
> That said, please explain your patch in more detail. i.e. Why do you remove
> these checks?
> Why is this correct to do so?
> To me it looks like an ad-hoc solution to make UBIFS not abort on your MLC
> by removing well-established checks.
> I agree that UBIFS's master node checks are very picky but for SLC they are
> correct and make a lot of sense.
> Adding MLC support must not hurt UBIFS's SLC robustness.
Currently, we get more feedbacks from our customers who are using MLC NAND,
They more like UBIFS more reliable, Even can tolerate to discard some user
Data after next power on. Means that they don't want to UBIFS mount failed just
Because of power loss, If to discard the data for the stability of the system, they
prefer to choose the latter.
For UBIFS master node on MLC NAND, I often found that one of master node block is OK,
But because of second master node block exist two pages damaged data, recovery always
Fails. Not matter SLC or MLC, as long as there is a good master node, recovery must be
Successful.
> Thanks,
> //richard
Powered by blists - more mailing lists