| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1450133093-7053-13-git-send-email-joshua.henderson@microchip.com>
Date: Mon, 14 Dec 2015 15:42:14 -0700
From: Joshua Henderson <joshua.henderson@...rochip.com>
To: <linux-kernel@...r.kernel.org>
CC: <linux-mips@...ux-mips.org>, <ralf@...ux-mips.org>,
Andrei Pistirica <andrei.pistirica@...rochip.com>,
Joshua Henderson <joshua.henderson@...rochip.com>,
Ulf Hansson <ulf.hansson@...aro.org>,
Jean Delvare <jdelvare@...e.de>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Corneliu Doban <cdoban@...adcom.com>,
Haojian Zhuang <haojian.zhuang@...il.com>,
Luis de Bethencourt <luisbg@....samsung.com>,
Weijun Yang <Weijun.Yang@....com>,
Lokesh Vutla <lokeshvutla@...com>,
Scott Branden <sbranden@...adcom.com>,
Vincent Yang <vincent.yang.fujitsu@...il.com>,
Chaotian Jing <chaotian.jing@...iatek.com>,
"ludovic.desroches@...el.com" <ludovic.desroches@...el.com>,
Shawn Lin <shawn.lin@...k-chips.com>,
Stephen Boyd <sboyd@...eaurora.org>,
yangbo lu <yangbo.lu@...escale.com>,
Kevin Hao <haokexin@...il.com>,
Ben Hutchings <ben@...adent.org.uk>,
Andy Green <andy.green@...aro.org>, <linux-mmc@...r.kernel.org>
Subject: [PATCH v2 12/14] mmc: sdhci-pic32: Add PIC32 SDHCI host controller driver
From: Andrei Pistirica <andrei.pistirica@...rochip.com>
This driver supports the SDHCI host controller found on a PIC32.
Signed-off-by: Andrei Pistirica <andrei.pistirica@...rochip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@...rochip.com>
Cc: Ralf Baechle <ralf@...ux-mips.org>
---
drivers/mmc/host/Kconfig | 11 ++
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sdhci-pic32.c | 291 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 303 insertions(+)
create mode 100644 drivers/mmc/host/sdhci-pic32.c
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 1dee533..1a3a42b 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -785,3 +785,14 @@ config MMC_MTK
If you have a machine with a integrated SD/MMC card reader, say Y or M here.
This is needed if support for any SD/SDIO/MMC devices is required.
If unsure, say N.
+
+config MMC_SDHCI_MICROCHIP_PIC32
+ tristate "Microchip PIC32MZDA SDHCI support"
+ depends on MMC_SDHCI && PIC32MZDA
+ help
+ This selects the Secure Digital Host Controller Interface (SDHCI)
+ for PIC32MZDA platform.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 3595f83..af918d2 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -75,6 +75,7 @@ obj-$(CONFIG_MMC_SDHCI_BCM2835) += sdhci-bcm2835.o
obj-$(CONFIG_MMC_SDHCI_IPROC) += sdhci-iproc.o
obj-$(CONFIG_MMC_SDHCI_MSM) += sdhci-msm.o
obj-$(CONFIG_MMC_SDHCI_ST) += sdhci-st.o
+obj-$(CONFIG_MMC_SDHCI_MICROCHIP_PIC32) += sdhci-pic32.o
ifeq ($(CONFIG_CB710_DEBUG),y)
CFLAGS-cb710-mmc += -DDEBUG
diff --git a/drivers/mmc/host/sdhci-pic32.c b/drivers/mmc/host/sdhci-pic32.c
new file mode 100644
index 0000000..b7d7da2
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pic32.c
@@ -0,0 +1,291 @@
+/*
+ * Support of SDHCI platform devices for Microchip PIC32.
+ *
+ * Copyright (C) 2015 Microchip
+ * Andrei Pistirica, Paul Thacker
+ *
+ * Inspired by sdhci-pltfm.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/mmc/host.h>
+#include <linux/io.h>
+#include "sdhci.h"
+#include <linux/platform_data/sdhci-pic32.h>
+
+#define SDH_SHARED_BUS_CTRL 0x000000E0
+#define SDH_SHARED_BUS_NR_CLK_PINS_MASK 0x7
+#define SDH_SHARED_BUS_NR_IRQ_PINS_MASK 0x30
+#define SDH_SHARED_BUS_CLK_PINS 0x10
+#define SDH_SHARED_BUS_IRQ_PINS 0x14
+#define SDH_CAPS_SDH_SLOT_TYPE_MASK 0xC0000000
+#define SDH_SLOT_TYPE_REMOVABLE 0x0
+#define SDH_SLOT_TYPE_EMBEDDED 0x1
+#define SDH_SLOT_TYPE_SHARED_BUS 0x2
+#define SDHCI_CTRL_CDSSEL 0x80
+#define SDHCI_CTRL_CDTLVL 0x40
+
+#define ADMA_FIFO_RD_THSHLD 512
+#define ADMA_FIFO_WR_THSHLD 512
+
+#define DEV_NAME "pic32-sdhci"
+
+struct pic32_sdhci_pdata {
+ struct platform_device *pdev;
+ struct clk *sys_clk;
+ struct clk *base_clk;
+};
+
+static unsigned int pic32_sdhci_get_max_clock(struct sdhci_host *host)
+{
+ struct pic32_sdhci_pdata *sdhci_pdata = sdhci_priv(host);
+
+ return clk_get_rate(sdhci_pdata->base_clk);
+}
+
+static void pic32_sdhci_set_bus_width(struct sdhci_host *host, int width)
+{
+ u8 ctrl;
+
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ if (width == MMC_BUS_WIDTH_8) {
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ if (host->version >= SDHCI_SPEC_300)
+ ctrl |= SDHCI_CTRL_8BITBUS;
+ } else {
+ if (host->version >= SDHCI_SPEC_300)
+ ctrl &= ~SDHCI_CTRL_8BITBUS;
+ if (width == MMC_BUS_WIDTH_4)
+ ctrl |= SDHCI_CTRL_4BITBUS;
+ else
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ }
+ /*
+ * SDHCI will not work if JTAG is not Connected.As a workaround fix,
+ * set Card Detect Signal Selection bit in SDHCI Host Control
+ * register and clear Card Detect Test Level bit in SDHCI Host
+ * Control register.
+ */
+ ctrl &= ~SDHCI_CTRL_CDTLVL;
+ ctrl |= SDHCI_CTRL_CDSSEL;
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+}
+
+static unsigned int pic32_sdhci_get_ro(struct sdhci_host *host)
+{
+ /*
+ * The SDHCI_WRITE_PROTECT bit is unstable on current hardware so we
+ * can't depend on its value in any way.
+ */
+ return 0;
+}
+
+static const struct sdhci_ops pic32_sdhci_ops = {
+ .get_max_clock = pic32_sdhci_get_max_clock,
+ .set_clock = sdhci_set_clock,
+ .set_bus_width = pic32_sdhci_set_bus_width,
+ .reset = sdhci_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .get_ro = pic32_sdhci_get_ro,
+};
+
+static void pic32_sdhci_shared_bus(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ u32 bus = readl(host->ioaddr + SDH_SHARED_BUS_CTRL);
+ u32 clk_pins = (bus & SDH_SHARED_BUS_NR_CLK_PINS_MASK) >> 0;
+ u32 irq_pins = (bus & SDH_SHARED_BUS_NR_IRQ_PINS_MASK) >> 4;
+
+ /* select first clock */
+ if (clk_pins & 0x1)
+ bus |= (0x1 << SDH_SHARED_BUS_CLK_PINS);
+
+ /* select first interrupt */
+ if (irq_pins & 0x1)
+ bus |= (0x1 << SDH_SHARED_BUS_IRQ_PINS);
+
+ writel(bus, host->ioaddr + SDH_SHARED_BUS_CTRL);
+}
+
+static int pic32_sdhci_probe_platform(struct platform_device *pdev,
+ struct pic32_sdhci_pdata *pdata)
+{
+ int ret = 0;
+ u32 caps_slot_type;
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+
+ /* Check card slot connected on shared bus. */
+ host->caps = readl(host->ioaddr + SDHCI_CAPABILITIES);
+ caps_slot_type = (host->caps & SDH_CAPS_SDH_SLOT_TYPE_MASK) >> 30;
+ if (caps_slot_type == SDH_SLOT_TYPE_SHARED_BUS)
+ pic32_sdhci_shared_bus(pdev);
+
+ return ret;
+}
+
+static int pic32_sdhci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sdhci_host *host;
+ struct resource *iomem;
+ struct pic32_sdhci_pdata *sdhci_pdata;
+ struct pic32_sdhci_platform_data *plat_data;
+ unsigned int clk_rate = 0;
+ int ret;
+ struct pinctrl *pinctrl;
+
+ host = sdhci_alloc_host(dev, sizeof(*sdhci_pdata));
+ if (IS_ERR(host)) {
+ ret = PTR_ERR(host);
+ dev_err(&pdev->dev, "cannot allocate memory for sdhci\n");
+ goto err;
+ }
+
+ sdhci_pdata = sdhci_priv(host);
+ sdhci_pdata->pdev = pdev;
+ platform_set_drvdata(pdev, host);
+
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ host->ioaddr = devm_ioremap_resource(&pdev->dev, iomem);
+ if (IS_ERR(host->ioaddr)) {
+ ret = PTR_ERR(host->ioaddr);
+ dev_err(&pdev->dev, "unable to map iomem: %d\n", ret);
+ goto err_host;
+ }
+
+ plat_data = pdev->dev.platform_data;
+ if (plat_data && plat_data->setup_dma) {
+ ret = plat_data->setup_dma(ADMA_FIFO_RD_THSHLD,
+ ADMA_FIFO_WR_THSHLD);
+ if (ret)
+ goto err_host;
+ }
+
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl)) {
+ ret = PTR_ERR(pinctrl);
+ dev_warn(&pdev->dev, "No pinctrl provided %d\n", ret);
+ if (ret == -EPROBE_DEFER)
+ goto err_host;
+ }
+
+ host->ops = &pic32_sdhci_ops;
+ host->irq = platform_get_irq(pdev, 0);
+
+ sdhci_pdata->sys_clk = devm_clk_get(&pdev->dev, "sys_clk");
+ if (IS_ERR(sdhci_pdata->sys_clk)) {
+ ret = PTR_ERR(sdhci_pdata->sys_clk);
+ dev_err(&pdev->dev, "Error getting clock\n");
+ goto err_host;
+ }
+
+ /* Enable clock when available! */
+ ret = clk_prepare_enable(sdhci_pdata->sys_clk);
+ if (ret) {
+ dev_dbg(&pdev->dev, "Error enabling clock\n");
+ goto err_host;
+ }
+
+ /* SDH CLK enable */
+ sdhci_pdata->base_clk = devm_clk_get(&pdev->dev, "base_clk");
+ if (IS_ERR(sdhci_pdata->base_clk)) {
+ ret = PTR_ERR(sdhci_pdata->base_clk);
+ dev_err(&pdev->dev, "Error getting clock\n");
+ goto err_host;
+ }
+
+ /* Enable clock when available! */
+ ret = clk_prepare_enable(sdhci_pdata->base_clk);
+ if (ret) {
+ dev_dbg(&pdev->dev, "Error enabling clock\n");
+ goto err_host;
+ }
+
+ clk_rate = clk_get_rate(sdhci_pdata->base_clk);
+ dev_dbg(&pdev->dev, "base clock at: %u\n", clk_rate);
+ clk_rate = clk_get_rate(sdhci_pdata->sys_clk);
+ dev_dbg(&pdev->dev, "sys clock at: %u\n", clk_rate);
+
+ host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
+
+ host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
+
+ ret = mmc_of_parse(host->mmc);
+ if (ret)
+ goto err_host;
+
+ ret = pic32_sdhci_probe_platform(pdev, sdhci_pdata);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to probe platform!\n");
+ goto err_host;
+ }
+
+ ret = sdhci_add_host(host);
+ if (ret) {
+ dev_dbg(&pdev->dev, "error adding host\n");
+ goto err_host;
+ }
+
+ dev_info(&pdev->dev, "Successfully added sdhci host\n");
+ return 0;
+
+err_host:
+ sdhci_free_host(host);
+err:
+ dev_err(&pdev->dev, "pic32-sdhci probe failed: %d\n", ret);
+ return ret;
+}
+
+static int pic32_sdhci_remove(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct pic32_sdhci_pdata *sdhci_pdata = sdhci_priv(host);
+ int dead = 0;
+ u32 scratch;
+
+ scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
+ if (scratch == (u32)-1)
+ dead = 1;
+
+ sdhci_remove_host(host, dead);
+ clk_disable_unprepare(sdhci_pdata->base_clk);
+ clk_disable_unprepare(sdhci_pdata->sys_clk);
+ sdhci_free_host(host);
+
+ return 0;
+}
+
+static const struct of_device_id pic32_sdhci_id_table[] = {
+ { .compatible = "microchip,pic32mzda-sdhci" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, pic32_sdhci_id_table);
+
+static struct platform_driver pic32_sdhci_driver = {
+ .driver = {
+ .name = DEV_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(pic32_sdhci_id_table),
+ },
+ .probe = pic32_sdhci_probe,
+ .remove = pic32_sdhci_remove,
+};
+
+module_platform_driver(pic32_sdhci_driver);
+
+MODULE_DESCRIPTION("Microchip PIC32 SDHCI driver");
+MODULE_AUTHOR("Pistirica Sorin Andrei & Sandeep Sheriker");
+MODULE_LICENSE("GPL v2");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists