| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1450165058-2977-1-git-send-email-peter.ujfalusi@ti.com>
Date: Tue, 15 Dec 2015 09:37:38 +0200
From: Peter Ujfalusi <peter.ujfalusi@...com>
To: <kyungmin.park@...sung.com>, <dwmw2@...radead.org>,
<computersforpeace@...il.com>
CC: <linux-mtd@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
<linux-omap@...r.kernel.org>
Subject: [PATCH] mtd: onenand: omap2: Convert to use dmaengine for memcpy
Do not use the legacy and deprecated omap-dma interface for setting up the
memcpy.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@...com>
---
Hi,
this patch depends on the dma setup simplification patch:
https://www.mail-archive.com/linux-omap@vger.kernel.org/msg122375.html
We could try to enable the DMA memcpy without condition I believe, but I have
decided to not do it since the code had comments regarding to PM (?) when using
DMA.
Regards,
Peter
drivers/mtd/onenand/omap2.c | 84 ++++++++++++++++++++++-----------------------
1 file changed, 41 insertions(+), 43 deletions(-)
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 58576c9babb0..b747217d5e73 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -32,6 +32,7 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/regulator/consumer.h>
@@ -40,8 +41,6 @@
#include <linux/platform_data/mtd-onenand-omap2.h>
#include <asm/gpio.h>
-#include <linux/omap-dma.h>
-
#define DRIVER_NAME "omap2-onenand"
#define ONENAND_BUFRAM_SIZE (1024 * 5)
@@ -56,18 +55,16 @@ struct omap2_onenand {
struct onenand_chip onenand;
struct completion irq_done;
struct completion dma_done;
- int dma_channel;
+ struct dma_chan *dma_chan;
int freq;
int (*setup)(void __iomem *base, int *freq_ptr);
struct regulator *regulator;
u8 flags;
};
-static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
+static void omap2_onenand_dma_complete_func(void *completion)
{
- struct omap2_onenand *c = data;
-
- complete(&c->dma_done);
+ complete(completion);
}
static irqreturn_t omap2_onenand_interrupt(int irq, void *dev_id)
@@ -295,23 +292,33 @@ static inline int omap2_onenand_dma_transfer(struct omap2_onenand *c,
dma_addr_t src, dma_addr_t dst,
size_t count)
{
- int data_type = __ffs((src | dst | count));
+ struct dma_device *dma_dev = c->dma_chan->device;
+ struct dma_async_tx_descriptor *tx = NULL;
+ dma_cookie_t cookie;
- if (data_type > OMAP_DMA_DATA_TYPE_S32)
- data_type = OMAP_DMA_DATA_TYPE_S32;
-
- omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
- count / BIT(data_type), 1, 0, 0, 0);
- omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
- src, 0, 0);
- omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
- dst, 0, 0);
+ tx = dma_dev->device_prep_dma_memcpy(c->dma_chan, dst, src, count, 0);
+ if (!tx) {
+ dev_err(&c->pdev->dev, "Failed to prepare DMA memcpy\n");
+ return -EIO;
+ }
reinit_completion(&c->dma_done);
- omap_start_dma(c->dma_channel);
+ tx->callback = omap2_onenand_dma_complete_func;
+ tx->callback_param = &c->dma_done;
+
+ cookie = tx->tx_submit(tx);
+ if (dma_submit_error(cookie)) {
+ dev_err(&c->pdev->dev, "Failed to do DMA tx_submit\n");
+ return -EIO;
+ }
+
+ dma_async_issue_pending(c->dma_chan);
+
if (wait_for_completion_timeout(&c->dma_done, msecs_to_jiffies(20)))
return -ETIMEDOUT;
+ dmaengine_terminate_all(c->dma_chan);
+
return 0;
}
@@ -465,7 +472,7 @@ static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
/* DMA is not used. Revisit PM requirements before enabling it. */
- if (1 || (c->dma_channel < 0) ||
+ if (1 || !c->dma_chan ||
((void *) buffer >= (void *) high_memory) || (bram_offset & 3) ||
(((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) {
memcpy(buffer, (__force void *)(this->base + bram_offset),
@@ -503,7 +510,7 @@ static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
/* DMA is not used. Revisit PM requirements before enabling it. */
- if (1 || (c->dma_channel < 0) ||
+ if (1 || !c->dma_chan ||
((void *) buffer >= (void *) high_memory) || (bram_offset & 3) ||
(((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) {
memcpy((__force void *)(this->base + bram_offset), buffer,
@@ -608,8 +615,7 @@ static int omap2_onenand_probe(struct platform_device *pdev)
c->flags = pdata->flags;
c->gpmc_cs = pdata->cs;
c->gpio_irq = pdata->gpio_irq;
- c->dma_channel = pdata->dma_channel;
- if (c->dma_channel < 0) {
+ if (pdata->dma_channel < 0) {
/* if -1, don't use DMA */
c->gpio_irq = 0;
}
@@ -661,25 +667,17 @@ static int omap2_onenand_probe(struct platform_device *pdev)
goto err_release_gpio;
}
- if (c->dma_channel >= 0) {
- r = omap_request_dma(0, pdev->dev.driver->name,
- omap2_onenand_dma_cb, (void *) c,
- &c->dma_channel);
- if (r == 0) {
- omap_set_dma_write_mode(c->dma_channel,
- OMAP_DMA_WRITE_NON_POSTED);
- omap_set_dma_src_data_pack(c->dma_channel, 1);
- omap_set_dma_src_burst_mode(c->dma_channel,
- OMAP_DMA_DATA_BURST_8);
- omap_set_dma_dest_data_pack(c->dma_channel, 1);
- omap_set_dma_dest_burst_mode(c->dma_channel,
- OMAP_DMA_DATA_BURST_8);
- } else {
+ if (pdata->dma_channel >= 0) {
+ dma_cap_mask_t mask;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_MEMCPY, mask);
+
+ c->dma_chan = dma_request_channel(mask, NULL, NULL);
+ if (!c->dma_chan)
dev_info(&pdev->dev,
"failed to allocate DMA for OneNAND, "
"using PIO instead\n");
- c->dma_channel = -1;
- }
}
dev_info(&pdev->dev, "initializing on CS%d, phys base 0x%08lx, virtual "
@@ -693,7 +691,7 @@ static int omap2_onenand_probe(struct platform_device *pdev)
mtd_set_of_node(&c->mtd, pdata->of_node);
this = &c->onenand;
- if (c->dma_channel >= 0) {
+ if (c->dma_chan) {
this->wait = omap2_onenand_wait;
if (c->flags & ONENAND_IN_OMAP34XX) {
this->read_bufferram = omap3_onenand_read_bufferram;
@@ -735,8 +733,8 @@ err_release_onenand:
err_release_regulator:
regulator_put(c->regulator);
err_release_dma:
- if (c->dma_channel != -1)
- omap_free_dma(c->dma_channel);
+ if (c->dma_chan)
+ dma_release_channel(c->dma_chan);
if (c->gpio_irq)
free_irq(gpio_to_irq(c->gpio_irq), c);
err_release_gpio:
@@ -758,8 +756,8 @@ static int omap2_onenand_remove(struct platform_device *pdev)
onenand_release(&c->mtd);
regulator_put(c->regulator);
- if (c->dma_channel != -1)
- omap_free_dma(c->dma_channel);
+ if (c->dma_chan)
+ dma_release_channel(c->dma_chan);
omap2_onenand_shutdown(pdev);
if (c->gpio_irq) {
free_irq(gpio_to_irq(c->gpio_irq), c);
--
2.6.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists