[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1450200297-19243-1-git-send-email-mans@mansr.com>
Date: Tue, 15 Dec 2015 17:24:56 +0000
From: Mans Rullgard <mans@...sr.com>
To: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: marex@...x.de
Subject: [PATCH 1/2] devicetree: mxsfb: add reset-active property
Some boards connect the LCD_RESET pin to a reset input on the
display panel. On these boards, this pin must be set to the
proper level for the display to function.
This adds an optional "reset-active" property to the "display"
subnode such that devicetrees can specify the desired polarity
of the LCD_RESET pin.
Signed-off-by: Mans Rullgard <mans@...sr.com>
---
Documentation/devicetree/bindings/display/mxsfb.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/mxsfb.txt b/Documentation/devicetree/bindings/display/mxsfb.txt
index 96ec517..cb7212a 100644
--- a/Documentation/devicetree/bindings/display/mxsfb.txt
+++ b/Documentation/devicetree/bindings/display/mxsfb.txt
@@ -13,6 +13,11 @@ Required properties:
- bits-per-pixel : <16> for RGB565, <32> for RGB888/666.
- bus-width : number of data lines. Could be <8>, <16>, <18> or <24>.
+Optional properties:
+- reset-active : <0>: reset pin is active low
+ <1>: reset pin is active high
+ omitted: reset pin not used
+
Required sub-node:
- display-timings : Refer to binding doc display-timing.txt for details.
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists