| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1450271857.6730.26.camel@mtksdaap41>
Date: Wed, 16 Dec 2015 21:17:37 +0800
From: tiffany lin <tiffany.lin@...iatek.com>
To: Hans Verkuil <hansverk@...co.com>
CC: Hans Verkuil <hverkuil@...all.nl>, <daniel.thompson@...aro.org>,
"Rob Herring" <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
"Kumar Gala" <galak@...eaurora.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Mauro Carvalho Chehab <mchehab@....samsung.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Daniel Kurtz <djkurtz@...omium.org>,
Hans Verkuil <hans.verkuil@...co.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Sakari Ailus <sakari.ailus@....fi>,
Mikhail Ulyanov <mikhail.ulyanov@...entembedded.com>,
Fabien Dessenne <fabien.dessenne@...com>,
Arnd Bergmann <arnd@...db.de>,
Darren Etheridge <detheridge@...com>,
Peter Griffin <peter.griffin@...aro.org>,
"Benoit Parrot" <bparrot@...com>,
Andrew-CT Chen <andrew-ct.chen@...iatek.com>,
Eddie Huang <eddie.huang@...iatek.com>,
Yingjoe Chen <yingjoe.chen@...iatek.com>,
James Liao <jamesjj.liao@...iatek.com>,
Hongzhou Yang <hongzhou.yang@...iatek.com>,
Daniel Hsiao <daniel.hsiao@...iatek.com>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-media@...r.kernel.org>,
<linux-mediatek@...ts.infradead.org>, <PoChun.Lin@...iatek.com>
Subject: Re: [PATCH v2 6/8] [Media] vcodec: mediatek: Add Mediatek V4L2
Video Encoder Driver
Hi Hans,
On Tue, 2015-12-15 at 15:17 +0100, Hans Verkuil wrote:
>
> On 12/15/15 14:51, tiffany lin wrote:
> > Hi Hans,
> >
> > Thanks for your time.
> >
> > On Mon, 2015-12-14 at 13:50 +0100, Hans Verkuil wrote:
> >> Hi Tiffany,
> >>
> >> My apologies for the long delay, but I finally have time to do a review of this
> >> code.
> >>
> >> On 12/11/2015 10:55 AM, Tiffany Lin wrote:
> >>> From: Andrew-CT Chen <andrew-ct.chen@...iatek.com>
> >>>
> >>> Add v4l2 layer encoder driver for MT8173
> >>>
> >>> Signed-off-by: Tiffany Lin <tiffany.lin@...iatek.com>
> >>> ---
> >>> drivers/media/platform/Kconfig | 11 +
> >>> drivers/media/platform/Makefile | 2 +
> >>> drivers/media/platform/mtk-vcodec/Makefile | 8 +
> >>> drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 412 +++++
> >>> drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 1670 ++++++++++++++++++++
> >>> drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.h | 45 +
> >>> .../media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 469 ++++++
> >>> .../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 122 ++
> >>> .../media/platform/mtk-vcodec/mtk_vcodec_intr.c | 102 ++
> >>> .../media/platform/mtk-vcodec/mtk_vcodec_intr.h | 29 +
> >>> drivers/media/platform/mtk-vcodec/mtk_vcodec_pm.h | 26 +
> >>> .../media/platform/mtk-vcodec/mtk_vcodec_util.c | 106 ++
> >>> .../media/platform/mtk-vcodec/mtk_vcodec_util.h | 85 +
> >>> drivers/media/platform/mtk-vcodec/venc_drv_base.h | 62 +
> >>> drivers/media/platform/mtk-vcodec/venc_drv_if.c | 102 ++
> >>> drivers/media/platform/mtk-vcodec/venc_drv_if.h | 174 ++
> >>> drivers/media/platform/mtk-vcodec/venc_ipi_msg.h | 212 +++
> >>> 17 files changed, 3637 insertions(+)
> >>> create mode 100644 drivers/media/platform/mtk-vcodec/Makefile
> >>> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> >>> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> >>> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.h
> >>> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
> >>> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
> >>> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_intr.c
> >>> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_intr.h
> >>> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_pm.h
> >>> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_util.c
> >>> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_util.h
> >>> create mode 100644 drivers/media/platform/mtk-vcodec/venc_drv_base.h
> >>> create mode 100644 drivers/media/platform/mtk-vcodec/venc_drv_if.c
> >>> create mode 100644 drivers/media/platform/mtk-vcodec/venc_drv_if.h
> >>> create mode 100644 drivers/media/platform/mtk-vcodec/venc_ipi_msg.h
> >>>
> >>
> >> <snip>
> >>
> >>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> >>> new file mode 100644
> >>> index 0000000..d59064d
> >>> --- /dev/null
> >>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> >>> @@ -0,0 +1,1670 @@
> >>> +/*
> >>> +* Copyright (c) 2015 MediaTek Inc.
> >>> +* Author: PC Chen <pc.chen@...iatek.com>
> >>> +* Tiffany Lin <tiffany.lin@...iatek.com>
> >>> +*
> >>> +* This program is free software; you can redistribute it and/or modify
> >>> +* it under the terms of the GNU General Public License version 2 as
> >>> +* published by the Free Software Foundation.
> >>> +*
> >>> +* This program is distributed in the hope that it will be useful,
> >>> +* but WITHOUT ANY WARRANTY; without even the implied warranty of
> >>> +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> >>> +* GNU General Public License for more details.
> >>> +*/
> >>> +
> >>> +#include <media/v4l2-event.h>
> >>> +#include <media/v4l2-mem2mem.h>
> >>> +#include <media/videobuf2-dma-contig.h>
> >>> +
> >>> +#include "mtk_vcodec_drv.h"
> >>> +#include "mtk_vcodec_enc.h"
> >>> +#include "mtk_vcodec_intr.h"
> >>> +#include "mtk_vcodec_util.h"
> >>> +#include "venc_drv_if.h"
> >>> +
> >>> +static void mtk_venc_worker(struct work_struct *work);
> >>> +
> >>> +static struct mtk_video_fmt mtk_video_formats[] = {
> >>> + {
> >>> + .name = "4:2:0 3 Planes Y/Cb/Cr",
> >>
> >> Don't add the name. The v4l2 core will set that for you. This ensures that the name is
> >> always the same for the format, instead of being driver dependent.
> >>
> > We will remove it in next version.
> >
> >>> + .fourcc = V4L2_PIX_FMT_YUV420,
> >>> + .type = MTK_FMT_FRAME,
> >>> + .num_planes = 3,
> >>> + },
> >>> + {
> >>> + .name = "4:2:0 3 Planes Y/Cr/Cb",
> >>> + .fourcc = V4L2_PIX_FMT_YVU420,
> >>> + .type = MTK_FMT_FRAME,
> >>> + .num_planes = 3,
> >>> + },
> >>> + {
> >>> + .name = "4:2:0 2 Planes Y/CbCr",
> >>> + .fourcc = V4L2_PIX_FMT_NV12,
> >>> + .type = MTK_FMT_FRAME,
> >>> + .num_planes = 2,
> >>> + },
> >>> + {
> >>> + .name = "4:2:0 2 Planes Y/CrCb",
> >>> + .fourcc = V4L2_PIX_FMT_NV21,
> >>> + .type = MTK_FMT_FRAME,
> >>> + .num_planes = 2,
> >>> + },
> >>> + {
> >>> + .name = "4:2:0 3 none contiguous Planes Y/Cb/Cr",
> >>> + .fourcc = V4L2_PIX_FMT_YUV420M,
> >>> + .type = MTK_FMT_FRAME,
> >>> + .num_planes = 3,
> >>> + },
> >>> + {
> >>> + .name = "4:2:0 3 none contiguous Planes Y/Cr/Cb",
> >>> + .fourcc = V4L2_PIX_FMT_YVU420M,
> >>> + .type = MTK_FMT_FRAME,
> >>> + .num_planes = 3,
> >>> + },
> >>> + {
> >>> + .name = "4:2:0 2 none contiguous Planes Y/CbCr",
> >>> + .fourcc = V4L2_PIX_FMT_NV12M,
> >>> + .type = MTK_FMT_FRAME,
> >>> + .num_planes = 2,
> >>> + },
> >>> + {
> >>> + .name = "4:2:0 2 none contiguous Planes Y/CrCb",
> >>> + .fourcc = V4L2_PIX_FMT_NV21M,
> >>> + .type = MTK_FMT_FRAME,
> >>> + .num_planes = 2,
> >>> + },
> >>> + {
> >>> + .name = "H264 Encoded Stream",
> >>> + .fourcc = V4L2_PIX_FMT_H264,
> >>> + .type = MTK_FMT_ENC,
> >>> + .num_planes = 1,
> >>> + },
> >>> + {
> >>> + .name = "VP8 Encoded Stream",
> >>> + .fourcc = V4L2_PIX_FMT_VP8,
> >>> + .type = MTK_FMT_ENC,
> >>> + .num_planes = 1,
> >>> + },
> >>> +};
> >>> +
> >>> +#define NUM_FORMATS ARRAY_SIZE(mtk_video_formats)
> >>> +
> >>> +static struct mtk_vcodec_ctrl controls[] = {
> >>> + {
> >>> + .id = V4L2_CID_MPEG_VIDEO_BITRATE,
> >>> + .type = V4L2_CTRL_TYPE_INTEGER,
> >>> + .minimum = 1,
> >>> + .maximum = (1 << 30) - 1,
> >>> + .step = 1,
> >>> + .default_value = 4000000,
> >>> + },
> >>> + {
> >>> + .id = V4L2_CID_MPEG_VIDEO_B_FRAMES,
> >>> + .type = V4L2_CTRL_TYPE_INTEGER,
> >>> + .minimum = 0,
> >>> + .maximum = 2,
> >>> + .step = 1,
> >>> + .default_value = 0,
> >>> + },
> >>> + {
> >>> + .id = V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE,
> >>> + .type = V4L2_CTRL_TYPE_BOOLEAN,
> >>> + .minimum = 0,
> >>> + .maximum = 1,
> >>> + .step = 1,
> >>> + .default_value = 1,
> >>> + },
> >>> + {
> >>> + .id = V4L2_CID_MPEG_VIDEO_H264_MAX_QP,
> >>> + .type = V4L2_CTRL_TYPE_INTEGER,
> >>> + .minimum = 0,
> >>> + .maximum = 51,
> >>> + .step = 1,
> >>> + .default_value = 51,
> >>> + },
> >>> + {
> >>> + .id = V4L2_CID_MPEG_VIDEO_HEADER_MODE,
> >>> + .type = V4L2_CTRL_TYPE_MENU,
> >>> + .minimum = V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE,
> >>> + .maximum = V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME,
> >>> + .default_value = V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE,
> >>> + .menu_skip_mask = 0,
> >>> + },
> >>> + {
> >>> + .id = V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE,
> >>> + .type = V4L2_CTRL_TYPE_BOOLEAN,
> >>> + .minimum = 0,
> >>> + .maximum = 1,
> >>> + .step = 1,
> >>> + .default_value = 0,
> >>> + },
> >>> + {
> >>> + .id = V4L2_CID_MPEG_VIDEO_H264_PROFILE,
> >>> + .type = V4L2_CTRL_TYPE_MENU,
> >>> + .minimum = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE,
> >>> + .maximum = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH,
> >>> + .default_value = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN,
> >>> + },
> >>> + {
> >>> + .id = V4L2_CID_MPEG_VIDEO_H264_LEVEL,
> >>> + .type = V4L2_CTRL_TYPE_MENU,
> >>> + .minimum = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
> >>> + .maximum = V4L2_MPEG_VIDEO_H264_LEVEL_4_2,
> >>> + .default_value = V4L2_MPEG_VIDEO_H264_LEVEL_4_0,
> >>> + },
> >>> + {
> >>> + .id = V4L2_CID_MPEG_VIDEO_H264_I_PERIOD,
> >>> + .type = V4L2_CTRL_TYPE_INTEGER,
> >>> + .minimum = 0,
> >>> + .maximum = (1 << 16) - 1,
> >>> + .step = 1,
> >>> + .default_value = 30,
> >>> + },
> >>> + {
> >>> + .id = V4L2_CID_MPEG_VIDEO_GOP_SIZE,
> >>> + .type = V4L2_CTRL_TYPE_INTEGER,
> >>> + .minimum = 0,
> >>> + .maximum = (1 << 16) - 1,
> >>> + .step = 1,
> >>> + .default_value = 30,
> >>> + },
> >>
> >> Instead of using this array, I suggest calling v4l2_ctrl_new_std/v4l2_ctrl_new_std_menu
> >> directly. That will fill in fields like type and flags for you.
> >>
> > Sorry, I don't get it.
> > This array is for us to call v4l2_ctrl_new_std/v4l2_ctrl_new_std_menu
> > in mtk_venc_ctrls_setup.
> > Could you explain more?
>
> See e.g. drivers/media/platform/exynos4-is/fimc-isp.c, search for v4l2_ctrl_new_.
>
> So rather than walking an array and then calling v4l2_ctrl_new_* based on the
> contents of that array, just call v4l2_ctrl_new_std_* directly.
>
I got it now. Thanks a lot.
> >
> >>> + {
> >>> + .id = V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE,
> >>> + .type = V4L2_CTRL_TYPE_MENU,
> >>> + .minimum = V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED,
> >>> + .maximum = V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_NOT_CODED,
> >>> + .default_value =
> >>> + V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED,
> >>> + .menu_skip_mask = 0,
> >>> + },
> >>> + {
> >>> + .id = V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE,
> >>> + .type = V4L2_CTRL_TYPE_MENU,
> >>> + .minimum = V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED,
> >>> + .maximum = V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT,
> >>> + .default_value = V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED,
> >>> + .menu_skip_mask = 0,
> >>> + },
> >>
> >> As the name says, these are specific for the Exynos MFC 5.1. For the last one the max
> >> value of BUF_LIMIT makes no sense without the corresponding H264 CPB_SIZE controls.
> >>
> >> I wonder if these shouldn't be MediaTek specific controls instead of reusing MFC 5.1
> >> controls.
> >>
> > We have similar encode control to Exynos MFC 5.1, but the usage is
> > different.
> > We cannot find available id available for us, so just use MFC id.
> > We will remove these in next version.
>
> No need to remove it, just add your own range of controls by adding a V4L2_CID_MPEG_MTK_BASE
> define and your controls to include/uapi/linux/v4l2-controls.h, similar to what MFC51 does
> there.
>
Got it. We will do this in next version.
> >
> >
> >>> +};
> >>> +
> >>> +#define NUM_CTRLS ARRAY_SIZE(controls)
> >>> +
> >>> +static const struct mtk_codec_framesizes mtk_venc_framesizes[] = {
> >>> + {
> >>> + .fourcc = V4L2_PIX_FMT_H264,
> >>> + .stepwise = { 160, 1920, 16, 128, 1088, 16 },
> >>> + },
> >>> + {
> >>> + .fourcc = V4L2_PIX_FMT_VP8,
> >>> + .stepwise = { 160, 1920, 16, 128, 1088, 16 },
> >>> + },
> >>> +};
> >>> +
> >>> +#define NUM_SUPPORTED_FRAMESIZE ARRAY_SIZE(mtk_venc_framesizes)
> >>> +
> >>> +static int vidioc_venc_s_ctrl(struct v4l2_ctrl *ctrl)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = ctrl_to_ctx(ctrl);
> >>> + struct mtk_vcodec_dev *dev = ctx->dev;
> >>> + struct mtk_enc_params *p = &ctx->enc_params;
> >>> + int ret = 0;
> >>> +
> >>> + mtk_v4l2_debug(1, "[%d] id = %d/%d, val = %d", ctrl->id,
> >>> + ctx->idx, ctrl->id - V4L2_CID_MPEG_BASE, ctrl->val);
> >>> +
> >>> + switch (ctrl->id) {
> >>> + case V4L2_CID_MPEG_VIDEO_BITRATE:
> >>> +
> >>> + mtk_v4l2_debug(1, "V4L2_CID_MPEG_VIDEO_BITRATE val = %d",
> >>> + ctrl->val);
> >>> + p->bitrate = ctrl->val;
> >>> + ctx->param_change |= MTK_ENCODE_PARAM_BITRATE;
> >>> + break;
> >>> + case V4L2_CID_MPEG_VIDEO_B_FRAMES:
> >>> + mtk_v4l2_debug(1, "V4L2_CID_MPEG_VIDEO_B_FRAMES val = %d",
> >>> + ctrl->val);
> >>> + p->num_b_frame = ctrl->val;
> >>> + break;
> >>> + case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE:
> >>> + mtk_v4l2_debug(1, "V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE val = %d",
> >>> + ctrl->val);
> >>> + p->rc_frame = ctrl->val;
> >>> + break;
> >>> +
> >>> + case V4L2_CID_MPEG_VIDEO_H264_MAX_QP:
> >>> + mtk_v4l2_debug(1, "V4L2_CID_MPEG_VIDEO_H264_MAX_QP val = %d",
> >>> + ctrl->val);
> >>> + p->h264_max_qp = ctrl->val;
> >>> + break;
> >>> +
> >>> + case V4L2_CID_MPEG_VIDEO_HEADER_MODE:
> >>> + mtk_v4l2_debug(1, "V4L2_CID_MPEG_VIDEO_HEADER_MODE val = %d",
> >>> + ctrl->val);
> >>> + p->seq_hdr_mode = ctrl->val;
> >>> + break;
> >>> +
> >>> + case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE:
> >>> + mtk_v4l2_debug(1, "V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE val = %d",
> >>> + ctrl->val);
> >>> + p->rc_mb = ctrl->val;
> >>> + break;
> >>> +
> >>> + case V4L2_CID_MPEG_VIDEO_H264_PROFILE:
> >>> + mtk_v4l2_debug(1, "V4L2_CID_MPEG_VIDEO_H264_PROFILE val = %d",
> >>> + ctrl->val);
> >>> + p->h264_profile = ctrl->val;
> >>> + break;
> >>> +
> >>> + case V4L2_CID_MPEG_VIDEO_H264_LEVEL:
> >>> + mtk_v4l2_debug(1, "V4L2_CID_MPEG_VIDEO_H264_LEVEL val = %d",
> >>> + ctrl->val);
> >>> + p->h264_level = ctrl->val;
> >>> + break;
> >>> + case V4L2_CID_MPEG_VIDEO_H264_I_PERIOD:
> >>> + mtk_v4l2_debug(1, "V4L2_CID_MPEG_VIDEO_H264_I_PERIOD val = %d",
> >>> + ctrl->val);
> >>> + case V4L2_CID_MPEG_VIDEO_GOP_SIZE:
> >>> + mtk_v4l2_debug(1, "V4L2_CID_MPEG_VIDEO_GOP_SIZE val = %d",
> >>> + ctrl->val);
> >>> + p->gop_size = ctrl->val;
> >>> + ctx->param_change |= MTK_ENCODE_PARAM_INTRA_PERIOD;
> >>> + break;
> >>> + case V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE:
> >>> + mtk_v4l2_debug(1, "V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE val = %d",
> >>> + ctrl->val);
> >>> + if (ctrl->val ==
> >>> + V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_NOT_CODED) {
> >>> + v4l2_err(&dev->v4l2_dev, "unsupported frame type %x\n",
> >>> + ctrl->val);
> >>> + ret = -EINVAL;
> >>
> >> Don't do this. Just set the maximum value for this control to V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_I_FRAME.
> >> That way you don't have to check here.
> >>
> > Got it. We will remove this in next version.
> >
> >>> + break;
> >>> + }
> >>> + if (ctrl->val == V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_I_FRAME)
> >>> + p->force_intra = 1;
> >>> + else if (ctrl->val ==
> >>> + V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED)
> >>> + p->force_intra = 0;
> >>> + /* always allow user to insert I frame */
> >>> + ctrl->val = V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED;
> >>> + ctx->param_change |= MTK_ENCODE_PARAM_FRAME_TYPE;
> >>> + break;
> >>> +
> >>> + case V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE:
> >>> + mtk_v4l2_debug(1, "V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE val = %d",
> >>> + ctrl->val);
> >>> + if (ctrl->val == V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED)
> >>> + p->skip_frame = 0;
> >>> + else
> >>> + p->skip_frame = 1;
> >>
> >> This is weird: SKIP_MODE can have three values: DISABLED, LEVEL_LIMIT or BUF_LIMIT.
> >> I think you only support DISABLED and LEVEL_LIMIT. Again, set the maximum value for
> >> this control to LEVEL_LIMIT.
> >>
> >> I really think that these two controls should be new MediaTek specific controls.
> >> And probably boolean controls too, since they just toggle a feature instead of
> >> selecting from multiple values (unless that is a future planned extension).
> >>
> > Our encoder support SKIP mode, but is only allow skip one frame after
> > this CID set.
> > We use this for now because there is no mediate specific CIDs.
> > We need to figure out how to add Mediatek specific control CIDs.
>
> See above. It's really simple. Add the control to the v4l2-controls.h header, add
> support for it in v4l2-ctrls.c and document it in DocBook. Mostly copy-and-paste
> from what already exists.
>
Thanks. We will do this in next version.
> >
> >
> >>> + /* always allow user to skip frame */
> >>> + ctrl->val = V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED;
> >>> + ctx->param_change |= MTK_ENCODE_PARAM_SKIP_FRAME;
> >>> + break;
> >>> +
> >>> + default:
> >>> + mtk_v4l2_err("Invalid control, id=%d, val=%d\n",
> >>> + ctrl->id, ctrl->val);
> >>
> >> No need to print anything. This really can't happen, but I generally just return -EINVAL.
> >>
> > We will remove it in next version.
> >
> >>> + ret = -EINVAL;
> >>> + break;
> >>> + }
> >>> +
> >>> + return ret;
> >>> +}
> >>> +
> >>> +static const struct v4l2_ctrl_ops mtk_vcodec_enc_ctrl_ops = {
> >>> + .s_ctrl = vidioc_venc_s_ctrl,
> >>> +};
> >>> +
> >>> +static int vidioc_enum_fmt(struct file *file, struct v4l2_fmtdesc *f,
> >>> + bool out)
> >>> +{
> >>> + struct mtk_video_fmt *fmt;
> >>> + int i, j = 0;
> >>> +
> >>> + for (i = 0; i < NUM_FORMATS; ++i) {
> >>> + if (out && mtk_video_formats[i].type != MTK_FMT_FRAME)
> >>> + continue;
> >>> + else if (!out && mtk_video_formats[i].type != MTK_FMT_ENC)
> >>> + continue;
> >>> +
> >>> + if (j == f->index) {
> >>> + fmt = &mtk_video_formats[i];
> >>> + strlcpy(f->description, fmt->name,
> >>> + sizeof(f->description));
> >>
> >> Don't fill the description field, the core does that now for you.
> >>
> > We will remove it in next version.
> >
> >>> + f->pixelformat = fmt->fourcc;
> >>> + mtk_v4l2_debug(1, "f->index=%d i=%d fmt->name=%s",
> >>> + f->index, i, fmt->name);
> >>> + return 0;
> >>> + }
> >>> + ++j;
> >>> + }
> >>> +
> >>> + return -EINVAL;
> >>> +}
> >>> +
> >>> +static int vidioc_enum_framesizes(struct file *file, void *fh,
> >>> + struct v4l2_frmsizeenum *fsize)
> >>> +{
> >>> + int i = 0;
> >>> +
> >>> + for (i = 0; i < NUM_SUPPORTED_FRAMESIZE; ++i) {
> >>> + if (fsize->pixel_format != mtk_venc_framesizes[i].fourcc)
> >>> + continue;
> >>> +
> >>> + if (!fsize->index) {
> >>> + fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
> >>> + fsize->stepwise = mtk_venc_framesizes[i].stepwise;
> >>> + mtk_v4l2_debug(1, "%d %d %d %d %d %d",
> >>> + fsize->stepwise.min_width,
> >>> + fsize->stepwise.max_width,
> >>> + fsize->stepwise.step_width,
> >>> + fsize->stepwise.min_height,
> >>> + fsize->stepwise.max_height,
> >>> + fsize->stepwise.step_height);
> >>
> >> No need for a debug message here. You can debug ioctls by doing:
> >>
> >> echo X >/sys/class/video4linux/video0/dev_debug
> >>
> >> If X == 2, then you'll see all arguments printed as well. See also
> >> Documentation/video4linux/v4l2-framework.txt, section "video device debugging".
> >>
> >> In other words, you can probably drop a lot of the debug messages from the
> >> driver.
> >>
> > Got it. We will remove them in next version.
> >
> >
> >>> + return 0;
> >>> + }
> >>> + }
> >>> +
> >>> + return -EINVAL;
> >>> +}
> >>> +
> >>> +static int vidioc_enum_fmt_vid_cap_mplane(struct file *file, void *pirv,
> >>> + struct v4l2_fmtdesc *f)
> >>> +{
> >>> + return vidioc_enum_fmt(file, f, false);
> >>> +}
> >>> +
> >>> +static int vidioc_enum_fmt_vid_out_mplane(struct file *file, void *prov,
> >>> + struct v4l2_fmtdesc *f)
> >>> +{
> >>> + return vidioc_enum_fmt(file, f, true);
> >>> +}
> >>> +
> >>> +static int vidioc_venc_streamon(struct file *file, void *priv,
> >>> + enum v4l2_buf_type type)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
> >>> +
> >>> + return v4l2_m2m_streamon(file, ctx->m2m_ctx, type);
> >>> +}
> >>
> >> I recommend that you use the v4l2-mem2mem.h v4l2_m2m_ioctl_* helper functions
> >> directly for this and the following wrappers.
> >>
> > Got it. We will remove them in next version.
> >
> >>> +
> >>> +static int vidioc_venc_streamoff(struct file *file, void *priv,
> >>> + enum v4l2_buf_type type)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
> >>> +
> >>> + return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type);
> >>> +}
> >>> +
> >>> +static int vidioc_venc_reqbufs(struct file *file, void *priv,
> >>> + struct v4l2_requestbuffers *reqbufs)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
> >>> +
> >>> + mtk_v4l2_debug(1, "[%d]-> type=%d count=%d",
> >>> + ctx->idx, reqbufs->type, reqbufs->count);
> >>> +
> >>> + return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs);
> >>> +}
> >>> +
> >>> +static int vidioc_venc_querybuf(struct file *file, void *priv,
> >>> + struct v4l2_buffer *buf)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
> >>> +
> >>> + return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf);
> >>> +}
> >>> +
> >>> +static int vidioc_venc_qbuf(struct file *file, void *priv,
> >>> + struct v4l2_buffer *buf)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
> >>> + int ret;
> >>> +#if MTK_V4L2_BENCHMARK
> >>> + struct timeval begin, end;
> >>> +
> >>> + do_gettimeofday(&begin);
> >>
> >> Don't use do_gettimeofday! Use ktime_get or something like that. You want
> >> monotonic time, not wallclock time.
> >>
> >> Even better is to use tracepoints. Actually, I believe (d)qbuf already have
> >> tracepoints in vb2.
> >>
> >> I think this benchmark code should be removed unless there is something here
> >> can cannot be done in another way.
> > Got it. We will remove benchmark compile flag in next version.
> >
> >>> +#endif
> >>> +
> >>> + ret = v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf);
> >>> +
> >>> +#if MTK_V4L2_BENCHMARK
> >>> + do_gettimeofday(&end);
> >>> +
> >>> + if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
> >>> + ctx->total_qbuf_cap_cnt++;
> >>> + ctx->total_qbuf_cap_time +=
> >>> + ((end.tv_sec - begin.tv_sec) * 1000000 +
> >>> + end.tv_usec - begin.tv_usec);
> >>> + }
> >>> +
> >>> + if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
> >>> + ctx->total_qbuf_out_cnt++;
> >>> + ctx->total_qbuf_out_time +=
> >>> + ((end.tv_sec - begin.tv_sec) * 1000000 +
> >>> + end.tv_usec - begin.tv_usec);
> >>> + }
> >>> +
> >>> +#endif
> >>> +
> >>> + return ret;
> >>> +}
> >>> +
> >>> +static int vidioc_venc_dqbuf(struct file *file, void *priv,
> >>> + struct v4l2_buffer *buf)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
> >>> + int ret;
> >>> +#if MTK_V4L2_BENCHMARK
> >>> + struct timeval begin, end;
> >>> +
> >>> + do_gettimeofday(&begin);
> >>> +#endif
> >>> +
> >>> + ret = v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf);
> >>> +#if MTK_V4L2_BENCHMARK
> >>> +
> >>> + do_gettimeofday(&end);
> >>> + if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
> >>> + ctx->total_dqbuf_cap_cnt++;
> >>> + ctx->total_dqbuf_cap_time +=
> >>> + ((end.tv_sec - begin.tv_sec) * 1000000 +
> >>> + end.tv_usec - begin.tv_usec);
> >>> + }
> >>> +
> >>> + if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
> >>> + ctx->total_dqbuf_out_cnt++;
> >>> + ctx->total_dqbuf_out_time +=
> >>> + ((end.tv_sec - begin.tv_sec) * 1000000 +
> >>> + end.tv_usec - begin.tv_usec);
> >>> + }
> >>> +
> >>> +#endif
> >>> + return ret;
> >>> +}
> >>> +static int vidioc_venc_expbuf(struct file *file, void *priv,
> >>> + struct v4l2_exportbuffer *eb)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
> >>> + int ret;
> >>> +#if MTK_V4L2_BENCHMARK
> >>> + struct timeval begin, end;
> >>> +
> >>> + do_gettimeofday(&begin);
> >>> +#endif
> >>> +
> >>> + ret = v4l2_m2m_expbuf(file, ctx->m2m_ctx, eb);
> >>> +
> >>> +#if MTK_V4L2_BENCHMARK
> >>> + do_gettimeofday(&end);
> >>> + ctx->total_expbuf_time +=
> >>> + ((end.tv_sec - begin.tv_sec) * 1000000 +
> >>> + end.tv_usec - begin.tv_usec);
> >>> +#endif
> >>
> >> Why would you want to benchmark this function? Just curious, as I see no reason for it.
> >>
> > We want to check export dam buf performance in development stage.
> > We will remove it in next version.
> >
> >>> + return ret;
> >>> +}
> >>> +
> >>> +static int vidioc_venc_querycap(struct file *file, void *priv,
> >>> + struct v4l2_capability *cap)
> >>> +{
> >>> + strncpy(cap->driver, MTK_VCODEC_ENC_NAME, sizeof(cap->driver) - 1);
> >>
> >> Use strlcpy.
> > We will change it in next version.
> >
> >>
> >>> + cap->bus_info[0] = 0;
> >>
> >> Always fill this in. For platform devices this is a fixed string that starts with
> >> "platform:" and some meaningful name.
> >>
> >> The card field isn't filled in either.
> >>
> >>> + cap->version = KERNEL_VERSION(1, 0, 0);
> >>
> >> Don't set this in the driver. The v4l2 core will set this for you.
> >>
> > We will remove it in next version.
> >
> >>> + /*
> >>> + * This is only a mem-to-mem video device. The capture and output
> >>> + * device capability flags are left only for backward compatibility
> >>> + * and are scheduled for removal.
> >>> + */
> >>> + cap->capabilities = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING |
> >>> + V4L2_CAP_VIDEO_CAPTURE_MPLANE |
> >>> + V4L2_CAP_VIDEO_OUTPUT_MPLANE;
> >>
> >> Don't set V4L2_CAP_VIDEO_CAPTURE/OUTPUT_MPLANE. M2M_MPLANE is enough.
> >>
> > We will remove it in next version.
> >
> >> You also need to fill in cap->device_caps. For this driver it should be easy:
> >>
> >> cap->device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING;
> >> cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
> >>
> >> You should run the v4l2-compliance utility. It probably isn't able to correctly
> >> stream for a codec driver like this (known limitation), but it will certainly
> >> find errors like this.
> >>
> > We are not familiar with v4l2-compliance utility, we will check how to
> > use it.
>
> It's part of v4l-utils.git (http://git.linuxtv.org/v4l-utils.git/). There is a
> fairly decent man page. It does exhaustive compliance tests for V4L2 devices.
>
> That said, the support for memory-to-memory codec devices is not great, so I wouldn't
> trust any failures it reports when using the streaming tests (i.e. the --stream*
> options). By default just run 'v4l2-compliance -d /dev/videoX' to do the compliance
> test.
>
> Note: before I accept this driver I do want to see that compliance test output!
>
Got it. We will provide it in next version.
Now our driver is developed and run base on kernel v3.18.
V4L2 and vb2 have some difference between Linux 4.4-rc1 and 3.18 kernel.
Is it ok we provided test output base on v3.18 or we need to base on
4.4-rc1?
> >
> >
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static int vidioc_venc_subscribe_event(struct v4l2_fh *fh,
> >>> + const struct v4l2_event_subscription *sub)
> >>> +{
> >>> + return v4l2_event_subscribe(fh, sub, 0, NULL);
> >>
> >> Huh? You probably just want to use v4l2_ctrl_subscribe_event() instead of this
> >> wrapper.
> >>
> > We will change it in next version.
> >
> >>> +}
> >>> +
> >>> +static int vidioc_venc_s_parm(struct file *file, void *priv,
> >>> + struct v4l2_streamparm *a)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
> >>> +
> >>> + if (a->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
> >>> + ctx->enc_params.framerate_num =
> >>> + a->parm.output.timeperframe.denominator;
> >>> + ctx->enc_params.framerate_denom =
> >>> + a->parm.output.timeperframe.numerator;
> >>> + ctx->param_change |= MTK_ENCODE_PARAM_FRAMERATE;
> >>> +
> >>> + mtk_v4l2_debug(1, "framerate = %d/%d",
> >>> + ctx->enc_params.framerate_num,
> >>> + ctx->enc_params.framerate_denom);
> >>> + } else {
> >>> + mtk_v4l2_err("Non support param type %d",
> >>> + a->type);
> >>
> >> Don't spam the log. Just return the error.
> >>
> > We will remove it.
> >
> >>> + return -EINVAL;
> >>> + }
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static struct mtk_q_data *mtk_venc_get_q_data(struct mtk_vcodec_ctx *ctx,
> >>> + enum v4l2_buf_type type)
> >>> +{
> >>> + if (V4L2_TYPE_IS_OUTPUT(type))
> >>> + return &ctx->q_data[MTK_Q_DATA_SRC];
> >>> + else
> >>
> >> No 'else' needed here.
> >>
> > We will remove it.
> >
> >>> + return &ctx->q_data[MTK_Q_DATA_DST];
> >>> +}
> >>> +
> >>> +static struct mtk_video_fmt *mtk_venc_find_format(struct v4l2_format *f)
> >>> +{
> >>> + struct mtk_video_fmt *fmt;
> >>> + unsigned int k;
> >>> +
> >>> + for (k = 0; k < NUM_FORMATS; k++) {
> >>> + fmt = &mtk_video_formats[k];
> >>> + if (fmt->fourcc == f->fmt.pix.pixelformat)
> >>> + return fmt;
> >>> + }
> >>> +
> >>> + return NULL;
> >>> +}
> >>> +
> >>> +static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f)
> >>> +{
> >>> + struct mtk_video_fmt *fmt;
> >>> + char str[10];
> >>> + struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp;
> >>> +
> >>> + mtk_vcodec_fmt2str(f->fmt.pix_mp.pixelformat, str);
> >>> +
> >>> + if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
> >>> + fmt = mtk_venc_find_format(f);
> >>> + if (!fmt) {
> >>> + mtk_v4l2_err("failed to try output format %s\n", str);
> >>> + return -EINVAL;
> >>> + }
> >>> + if (pix_fmt_mp->plane_fmt[0].sizeimage == 0) {
> >>> + mtk_v4l2_err("must be set encoding output size %s\n",
> >>> + str);
> >>> + return -EINVAL;
> >>> + }
> >>> +
> >>> + pix_fmt_mp->plane_fmt[0].bytesperline =
> >>> + pix_fmt_mp->plane_fmt[0].sizeimage;
> >>
> >> What's happening here? For compressed formats bytesperline should be set to 0 (it
> >> makes no sense otherwise).
> >>
> > We will remove this in next version.
> >
> >> The sizeimage field should be set by the driver to the maximum buffer size that can
> >> be returned by the hardware for the current codec settings.
> >>
> >
> >> try_fmt should also fill in all the other fields (colorspace, field, num_planes).
> >> Again, use v4l2-compliance to check things like that. Also take a look at the virtual
> >> vim2m.c driver: that's a good example on how to handle colorspace and field.
> >> The problem is that the application provides the colorspace information on the VIDEO_OUTPUT
> >> side, and that's copied to the VIDEO_CAPTURE side when streaming.
> >>
> > Thanks for your information.
> > We will check how to use v4l2-compliance and survey vim2m.c.
> >
> >
> >>> + } else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
> >>> + fmt = mtk_venc_find_format(f);
> >>> + if (!fmt) {
> >>> + mtk_v4l2_err("failed to try output format %s\n", str);
> >>> + return -EINVAL;
> >>> + }
> >>> +
> >>> + if (fmt->num_planes != pix_fmt_mp->num_planes) {
> >>> + mtk_v4l2_err("failed to try output format %d %d %s\n",
> >>> + fmt->num_planes, pix_fmt_mp->num_planes,
> >>> + str);
> >>> + return -EINVAL;
> >>> + }
> >>
> >> No, just set pix_fmt_mp->num_planes to fmt->num_planes. try_fmt can only return
> >> an error if the requested pixelformat isn't found, and it has the choice to
> >> pick a default pixelformat in that case as well. Sadly, whether a default should
> >> be picked or an error should be returned is undefined in the spec (both approaches
> >> are used in practice).
> >>
> > We will fix this in next version.
> >
> >>> +
> >>> + v4l_bound_align_image(&pix_fmt_mp->width, 8, 1920, 1,
> >>> + &pix_fmt_mp->height, 4, 1080, 1, 0);
> >>> + } else {
> >>> + pr_err("invalid buf type %d\n", f->type);
> >>> + return -EINVAL;
> >>> + }
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static void mtk_vcodec_enc_calc_src_size(struct mtk_vcodec_ctx *ctx)
> >>> +{
> >>> + struct mtk_video_fmt *fmt = ctx->q_data[MTK_Q_DATA_SRC].fmt;
> >>> + struct mtk_q_data *q_data = &ctx->q_data[MTK_Q_DATA_SRC];
> >>> +
> >>> + ctx->q_data[MTK_Q_DATA_SRC].sizeimage[0] =
> >>> + ((q_data->width + 15) / 16) *
> >>> + ((q_data->height + 15) / 16) * 256;
> >>> + ctx->q_data[MTK_Q_DATA_SRC].bytesperline[0] = ALIGN(q_data->width, 16);
> >>> +
> >>> + if (fmt->num_planes == 2) {
> >>> + ctx->q_data[MTK_Q_DATA_SRC].sizeimage[1] =
> >>> + ((q_data->width + 15) / 16) *
> >>> + ((q_data->height + 15) / 16) * 128;
> >>> + ctx->q_data[MTK_Q_DATA_SRC].sizeimage[2] = 0;
> >>> + ctx->q_data[MTK_Q_DATA_SRC].bytesperline[1] =
> >>> + ALIGN(q_data->width, 16);
> >>> + ctx->q_data[MTK_Q_DATA_SRC].bytesperline[2] = 0;
> >>> + } else {
> >>> + ctx->q_data[MTK_Q_DATA_SRC].sizeimage[1] =
> >>> + ((q_data->width + 15) / 16) *
> >>> + ((q_data->height + 15) / 16) * 64;
> >>> + ctx->q_data[MTK_Q_DATA_SRC].sizeimage[2] =
> >>> + ((q_data->width + 15) / 16) *
> >>> + ((q_data->height + 15) / 16) * 64;
> >>> + ctx->q_data[MTK_Q_DATA_SRC].bytesperline[1] =
> >>> + ALIGN(q_data->width, 16) / 2;
> >>> + ctx->q_data[MTK_Q_DATA_SRC].bytesperline[2] =
> >>> + ALIGN(q_data->width, 16) / 2;
> >>> + }
> >>> +}
> >>> +
> >>> +static int vidioc_venc_s_fmt(struct file *file, void *priv,
> >>> + struct v4l2_format *f)
> >>> +{
> >>> + struct mtk_vcodec_dev *dev = video_drvdata(file);
> >>> + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
> >>> + struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp;
> >>> + struct vb2_queue *vq;
> >>> + struct mtk_q_data *q_data;
> >>> + int i, ret;
> >>> +
> >>> + ret = vidioc_try_fmt(file, priv, f);
> >>> + if (ret)
> >>> + return ret;
> >>> +
> >>> + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type);
> >>> + if (!vq) {
> >>> + v4l2_err(&dev->v4l2_dev, "fail to get vq\n");
> >>> + return -EINVAL;
> >>> + }
> >>> +
> >>> + if (vb2_is_busy(vq)) {
> >>> + v4l2_err(&dev->v4l2_dev, "queue busy\n");
> >>> + return -EBUSY;
> >>> + }
> >>> +
> >>> + q_data = mtk_venc_get_q_data(ctx, f->type);
> >>> + if (!q_data) {
> >>> + v4l2_err(&dev->v4l2_dev, "fail to get q data\n");
> >>> + return -EINVAL;
> >>> + }
> >>> +
> >>> + q_data->fmt = mtk_venc_find_format(f);
> >>> + if (!q_data->fmt) {
> >>> + v4l2_err(&dev->v4l2_dev, "q data null format\n");
> >>> + return -EINVAL;
> >>> + }
> >>> +
> >>> + q_data->width = f->fmt.pix_mp.width;
> >>> + q_data->height = f->fmt.pix_mp.height;
> >>> + q_data->colorspace = f->fmt.pix_mp.colorspace;
> >>> + q_data->field = f->fmt.pix_mp.field;
> >>> +
> >>> + for (i = 0; i < f->fmt.pix_mp.num_planes; i++) {
> >>> + struct v4l2_plane_pix_format *plane_fmt;
> >>> +
> >>> + plane_fmt = &f->fmt.pix_mp.plane_fmt[i];
> >>> + q_data->bytesperline[i] = plane_fmt->bytesperline;
> >>> + q_data->sizeimage[i] = plane_fmt->sizeimage;
> >>> + }
> >>> +
> >>> + if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
> >>> + q_data->width = f->fmt.pix_mp.width;
> >>> + q_data->height = f->fmt.pix_mp.height;
> >>> +
> >>> + mtk_vcodec_enc_calc_src_size(ctx);
> >>> + pix_fmt_mp->plane_fmt[0].sizeimage = q_data->sizeimage[0];
> >>> + pix_fmt_mp->plane_fmt[0].bytesperline =
> >>> + ctx->q_data[MTK_Q_DATA_SRC].bytesperline[0];
> >>> + pix_fmt_mp->plane_fmt[1].sizeimage = q_data->sizeimage[1];
> >>> + pix_fmt_mp->plane_fmt[1].bytesperline =
> >>> + ctx->q_data[MTK_Q_DATA_SRC].bytesperline[1];
> >>> + pix_fmt_mp->plane_fmt[2].sizeimage = q_data->sizeimage[2];
> >>> + pix_fmt_mp->plane_fmt[2].bytesperline =
> >>> + ctx->q_data[MTK_Q_DATA_SRC].bytesperline[2];
> >>> + }
> >>> +
> >>> + mtk_v4l2_debug(1,
> >>> + "[%d]: t=%d wxh=%dx%d fmt=%c%c%c%c sz=0x%x-%x-%x",
> >>> + ctx->idx,
> >>> + f->type,
> >>> + q_data->width, q_data->height,
> >>> + (f->fmt.pix_mp.pixelformat & 0xff),
> >>> + (f->fmt.pix_mp.pixelformat >> 8) & 0xff,
> >>> + (f->fmt.pix_mp.pixelformat >> 16) & 0xff,
> >>> + (f->fmt.pix_mp.pixelformat >> 24) & 0xff,
> >>> + q_data->sizeimage[0],
> >>> + q_data->sizeimage[1],
> >>> + q_data->sizeimage[2]);
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static int vidioc_venc_g_fmt(struct file *file, void *priv,
> >>> + struct v4l2_format *f)
> >>> +{
> >>> + struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp;
> >>> + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
> >>> + struct vb2_queue *vq;
> >>> + struct mtk_q_data *q_data;
> >>> + int i;
> >>> +
> >>> + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type);
> >>> + if (!vq)
> >>> + return -EINVAL;
> >>> +
> >>> + q_data = mtk_venc_get_q_data(ctx, f->type);
> >>> +
> >>> + pix->width = q_data->width;
> >>> + pix->height = q_data->height;
> >>> + pix->pixelformat = q_data->fmt->fourcc;
> >>> + pix->field = q_data->field;
> >>> + pix->colorspace = q_data->colorspace;
> >>> + pix->num_planes = q_data->fmt->num_planes;
> >>> +
> >>> + for (i = 0; i < pix->num_planes; i++) {
> >>> + pix->plane_fmt[i].bytesperline = q_data->bytesperline[i];
> >>> + pix->plane_fmt[i].sizeimage = q_data->sizeimage[i];
> >>> + }
> >>> +
> >>> + mtk_v4l2_debug(1,
> >>> + "[%d]<- type=%d wxh=%dx%d fmt=%c%c%c%c sz[0]=0x%x sz[1]=0x%x",
> >>> + ctx->idx, f->type,
> >>> + pix->width, pix->height,
> >>> + (pix->pixelformat & 0xff),
> >>> + (pix->pixelformat >> 8) & 0xff,
> >>> + (pix->pixelformat >> 16) & 0xff,
> >>> + (pix->pixelformat >> 24) & 0xff,
> >>> + pix->plane_fmt[0].sizeimage,
> >>> + pix->plane_fmt[1].sizeimage);
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static int vidioc_venc_g_ctrl(struct file *file, void *fh,
> >>> + struct v4l2_control *ctrl)
> >>> +{
> >>> + int ret = 0;
> >>> +
> >>> + switch (ctrl->id) {
> >>> + case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:
> >>> + case V4L2_CID_MIN_BUFFERS_FOR_OUTPUT:
> >>> + ctrl->value = 1;
> >>> + break;
> >>> + default:
> >>> + ret = -EINVAL;
> >>> + break;
> >>> + }
> >>> + return ret;
> >>> +}
> >>
> >> This shouldn't be needed. These are read-only controls which return a single fixed
> >> value, so other than declaring them you don't need to do anything else.
> >>
> >
> > I don't understanding.
> > We need to return error if unsupported V4L2_CIDs get called, don't we?
>
> That's not what I mean. The whole vidioc_venc_g_ctrl function should be removed.
> Instead you just call v4l2_ctrl_new_std for these MIN_BUFFERS controls at the same
> time you create all other controls, and that's all you need to do. The min, max, step
> and default_value values of these controls are just 1, 1, 1, 1. It's a read-only
> control, so the control framework will just return, well, 1. No need for any coding.
>
Got it. We will remove it and use v4l2_ctrl_new_std in next version.
> >
> >>> +
> >>> +static int vidioc_venc_s_crop(struct file *file, void *fh,
> >>> + const struct v4l2_crop *a)
> >>
> >> Don't use crop. It's deprecated. Use g/s_selection instead (and the core will provide
> >> g/s_crop support for you on top of g/s_selection).
> >>
> > We will change to use g/s_selection in next version.
> >
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = fh_to_ctx(fh);
> >>> + struct mtk_q_data *q_data;
> >>> +
> >>> + if (a->c.left || a->c.top)
> >>> + return -EINVAL;
> >>> +
> >>> + q_data = mtk_venc_get_q_data(ctx, a->type);
> >>> + if (!q_data)
> >>> + return -EINVAL;
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static int vidioc_venc_g_crop(struct file *file, void *fh,
> >>> + struct v4l2_crop *a)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = fh_to_ctx(fh);
> >>> + struct mtk_q_data *q_data;
> >>> +
> >>> + if (a->c.left || a->c.top)
> >>> + return -EINVAL;
> >>> +
> >>> + q_data = mtk_venc_get_q_data(ctx, a->type);
> >>> + if (!q_data)
> >>> + return -EINVAL;
> >>> +
> >>> + a->c.width = q_data->width;
> >>> + a->c.height = q_data->height;
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +
> >>> +const struct v4l2_ioctl_ops mtk_venc_ioctl_ops = {
> >>> + .vidioc_streamon = vidioc_venc_streamon,
> >>> + .vidioc_streamoff = vidioc_venc_streamoff,
> >>> +
> >>> + .vidioc_reqbufs = vidioc_venc_reqbufs,
> >>> + .vidioc_querybuf = vidioc_venc_querybuf,
> >>> + .vidioc_qbuf = vidioc_venc_qbuf,
> >>> + .vidioc_expbuf = vidioc_venc_expbuf,
> >>> + .vidioc_dqbuf = vidioc_venc_dqbuf,
> >>> +
> >>> + .vidioc_querycap = vidioc_venc_querycap,
> >>> + .vidioc_enum_fmt_vid_cap_mplane = vidioc_enum_fmt_vid_cap_mplane,
> >>> + .vidioc_enum_fmt_vid_out_mplane = vidioc_enum_fmt_vid_out_mplane,
> >>> + .vidioc_enum_framesizes = vidioc_enum_framesizes,
> >>> +
> >>> + .vidioc_subscribe_event = vidioc_venc_subscribe_event,
> >>> +
> >>> + .vidioc_s_parm = vidioc_venc_s_parm,
> >>> +
> >>> + .vidioc_s_fmt_vid_cap_mplane = vidioc_venc_s_fmt,
> >>> + .vidioc_s_fmt_vid_out_mplane = vidioc_venc_s_fmt,
> >>> +
> >>> + .vidioc_g_fmt_vid_cap_mplane = vidioc_venc_g_fmt,
> >>> + .vidioc_g_fmt_vid_out_mplane = vidioc_venc_g_fmt,
> >>> +
> >>> + .vidioc_g_ctrl = vidioc_venc_g_ctrl,
> >>
> >> Definitely not allowed here :-) Just use the control framework. You can't
> >> mix-and-match.
> >>
> > We will remove it in next version.
> >
> >>> +
> >>> + .vidioc_s_crop = vidioc_venc_s_crop,
> >>> + .vidioc_g_crop = vidioc_venc_g_crop,
> >>> +
> >>> +};
> >>> +
> >>> +static int vb2ops_venc_queue_setup(struct vb2_queue *vq,
> >>> + const void *parg,
> >>> + unsigned int *nbuffers,
> >>> + unsigned int *nplanes,
> >>> + unsigned int sizes[], void *alloc_ctxs[])
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vq);
> >>> + struct mtk_q_data *q_data;
> >>> +
> >>> + q_data = mtk_venc_get_q_data(ctx, vq->type);
> >>> +
> >>> + if (*nbuffers < 1)
> >>> + *nbuffers = 1;
> >>> + if (*nbuffers > MTK_VIDEO_MAX_FRAME)
> >>> + *nbuffers = MTK_VIDEO_MAX_FRAME;
> >>> +
> >>> + *nplanes = q_data->fmt->num_planes;
> >>> +
> >>> + if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
> >>> + unsigned int i;
> >>> +
> >>> + for (i = 0; i < *nplanes; i++) {
> >>> + sizes[i] = q_data->sizeimage[i];
> >>> + alloc_ctxs[i] = ctx->dev->alloc_ctx;
> >>> + }
> >>> + } else if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
> >>> + sizes[0] = q_data->sizeimage[0];
> >>> + alloc_ctxs[0] = ctx->dev->alloc_ctx;
> >>> + } else {
> >>> + return -EINVAL;
> >>> + }
> >>> +
> >>> + mtk_v4l2_debug(2,
> >>> + "[%d]get %d buffer(s) of size 0x%x each",
> >>> + ctx->idx, *nbuffers, sizes[0]);
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static int vb2ops_venc_buf_prepare(struct vb2_buffer *vb)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> >>> + struct mtk_q_data *q_data;
> >>> + int i;
> >>> +
> >>> + q_data = mtk_venc_get_q_data(ctx, vb->vb2_queue->type);
> >>> +
> >>> + for (i = 0; i < q_data->fmt->num_planes; i++) {
> >>> + if (vb2_plane_size(vb, i) < q_data->sizeimage[i]) {
> >>> + mtk_v4l2_debug(2,
> >>> + "data will not fit into plane %d (%lu < %d)",
> >>> + i, vb2_plane_size(vb, i),
> >>> + q_data->sizeimage[i]);
> >>> + return -EINVAL;
> >>> + }
> >>> + }
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static void vb2ops_venc_buf_queue(struct vb2_buffer *vb)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> >>> + struct mtk_video_enc_buf *buf =
> >>> + container_of(vb, struct mtk_video_enc_buf, b);
> >>> +
> >>> + if ((vb->vb2_queue->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) &&
> >>> + (ctx->param_change != MTK_ENCODE_PARAM_NONE)) {
> >>> + mtk_v4l2_debug(1,
> >>> + "[%d] Before id=%d encode parameter change %x",
> >>> + ctx->idx, vb->index,
> >>> + ctx->param_change);
> >>> + buf->param_change = ctx->param_change;
> >>> + if (buf->param_change & MTK_ENCODE_PARAM_BITRATE) {
> >>> + buf->enc_params.bitrate = ctx->enc_params.bitrate;
> >>> + mtk_v4l2_debug(1, "change param br=%d",
> >>> + buf->enc_params.bitrate);
> >>> + }
> >>> + if (ctx->param_change & MTK_ENCODE_PARAM_FRAMERATE) {
> >>> + buf->enc_params.framerate_num =
> >>> + ctx->enc_params.framerate_num;
> >>> + buf->enc_params.framerate_denom =
> >>> + ctx->enc_params.framerate_denom;
> >>> + mtk_v4l2_debug(1, "change param fr=%d",
> >>> + buf->enc_params.framerate_num /
> >>> + buf->enc_params.framerate_denom);
> >>> + }
> >>> + if (ctx->param_change & MTK_ENCODE_PARAM_INTRA_PERIOD) {
> >>> + buf->enc_params.gop_size = ctx->enc_params.gop_size;
> >>> + mtk_v4l2_debug(1, "change param intra period=%d",
> >>> + buf->enc_params.gop_size);
> >>> + }
> >>> + if (ctx->param_change & MTK_ENCODE_PARAM_FRAME_TYPE) {
> >>> + buf->enc_params.force_intra =
> >>> + ctx->enc_params.force_intra;
> >>> + mtk_v4l2_debug(1, "change param force I=%d",
> >>> + buf->enc_params.force_intra);
> >>> + }
> >>> + if (ctx->param_change & MTK_ENCODE_PARAM_SKIP_FRAME) {
> >>> + buf->enc_params.skip_frame =
> >>> + ctx->enc_params.skip_frame;
> >>> + mtk_v4l2_debug(1, "change param skip frame=%d",
> >>> + buf->enc_params.skip_frame);
> >>> + }
> >>> + ctx->param_change = MTK_ENCODE_PARAM_NONE;
> >>> + }
> >>> +
> >>> + v4l2_m2m_buf_queue(ctx->m2m_ctx, to_vb2_v4l2_buffer(vb));
> >>> +}
> >>> +
> >>> +static void mtk_venc_set_param(struct mtk_vcodec_ctx *ctx, void *param)
> >>> +{
> >>> + struct venc_enc_prm *p = (struct venc_enc_prm *)param;
> >>> + struct mtk_q_data *q_data_src = &ctx->q_data[MTK_Q_DATA_SRC];
> >>> + struct mtk_enc_params *enc_params = &ctx->enc_params;
> >>> + unsigned int frame_rate;
> >>> +
> >>> + frame_rate = enc_params->framerate_num / enc_params->framerate_denom;
> >>> +
> >>> + switch (q_data_src->fmt->fourcc) {
> >>> + case V4L2_PIX_FMT_YUV420:
> >>> + case V4L2_PIX_FMT_YUV420M:
> >>> + p->input_fourcc = VENC_YUV_FORMAT_420;
> >>> + break;
> >>> + case V4L2_PIX_FMT_YVU420:
> >>> + case V4L2_PIX_FMT_YVU420M:
> >>> + p->input_fourcc = VENC_YUV_FORMAT_YV12;
> >>> + break;
> >>> + case V4L2_PIX_FMT_NV12:
> >>> + case V4L2_PIX_FMT_NV12M:
> >>> + p->input_fourcc = VENC_YUV_FORMAT_NV12;
> >>> + break;
> >>> + case V4L2_PIX_FMT_NV21:
> >>> + case V4L2_PIX_FMT_NV21M:
> >>> + p->input_fourcc = VENC_YUV_FORMAT_NV21;
> >>> + break;
> >>> + }
> >>> + p->h264_profile = enc_params->h264_profile;
> >>> + p->h264_level = enc_params->h264_level;
> >>> + p->width = q_data_src->width;
> >>> + p->height = q_data_src->height;
> >>> + p->buf_width = q_data_src->bytesperline[0];
> >>> + p->buf_height = ((q_data_src->height + 0xf) & (~0xf));
> >>> + p->frm_rate = frame_rate;
> >>> + p->intra_period = enc_params->gop_size;
> >>> + p->bitrate = enc_params->bitrate;
> >>> +
> >>> + ctx->param_change = MTK_ENCODE_PARAM_NONE;
> >>> +
> >>> + mtk_v4l2_debug(1,
> >>> + "fmt 0x%x P/L %d/%d w/h %d/%d buf %d/%d fps/bps %d/%d gop %d",
> >>> + p->input_fourcc, p->h264_profile, p->h264_level, p->width,
> >>> + p->height, p->buf_width, p->buf_height, p->frm_rate,
> >>> + p->bitrate, p->intra_period);
> >>> +}
> >>> +
> >>> +static int vb2ops_venc_start_streaming(struct vb2_queue *q, unsigned int count)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(q);
> >>> + struct v4l2_device *v4l2_dev = &ctx->dev->v4l2_dev;
> >>> + int ret;
> >>> + struct venc_enc_prm param;
> >>> +
> >>> +#if MTK_V4L2_BENCHMARK
> >>> + struct timeval begin, end;
> >>> +
> >>> + do_gettimeofday(&begin);
> >>> +#endif
> >>> +
> >>> + /* Once state turn into MTK_STATE_ABORT, we need stop_streaming to clear it */
> >>> + if (ctx->state == MTK_STATE_ABORT)
> >>> + return -EINVAL;
> >>> +
> >>> + if (!(vb2_start_streaming_called(&ctx->m2m_ctx->out_q_ctx.q) &
> >>> + vb2_start_streaming_called(&ctx->m2m_ctx->cap_q_ctx.q))) {
> >>> + mtk_v4l2_debug(1, "[%d]-> out=%d cap=%d",
> >>> + ctx->idx,
> >>> + vb2_start_streaming_called(&ctx->m2m_ctx->out_q_ctx.q),
> >>> + vb2_start_streaming_called(&ctx->m2m_ctx->cap_q_ctx.q));
> >>> + return 0;
> >>> + }
> >>> +
> >>> +
> >>> + ret = venc_if_create(ctx,
> >>> + ctx->q_data[MTK_Q_DATA_DST].fmt->fourcc);
> >>
> >> Weird indentation.
> >>
> > We will fix it in next version.
> >
> >>> + if (ret) {
> >>> + v4l2_err(v4l2_dev, "venc_if_create failed=%d, codec type=%x\n",
> >>> + ret, ctx->q_data[MTK_Q_DATA_DST].fmt->fourcc);
> >>> + return -EINVAL;
> >>> + }
> >>> +
> >>> + mtk_venc_set_param(ctx, ¶m);
> >>> + ret = venc_if_set_param(ctx,
> >>> + VENC_SET_PARAM_ENC, ¶m);
> >>> + if (ret) {
> >>> + v4l2_err(v4l2_dev, "venc_if_set_param failed=%d\n",
> >>> + ret);
> >>> + venc_if_release(ctx);
> >>> + return -EINVAL;
> >>> + }
> >>> +
> >>> + ctx->state = MTK_STATE_INIT;
> >>> +
> >>> + if ((ctx->q_data[MTK_Q_DATA_DST].fmt->fourcc ==
> >>> + V4L2_PIX_FMT_H264) &&
> >>> + (ctx->enc_params.seq_hdr_mode !=
> >>> + V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE)) {
> >>> + ret = venc_if_set_param(ctx,
> >>> + VENC_SET_PARAM_PREPEND_HEADER,
> >>> + 0);
> >>> + if (ret) {
> >>> + v4l2_err(v4l2_dev,
> >>> + "venc_if_set_param failed=%d\n",
> >>> + ret);
> >>> + venc_if_release(ctx);
> >>> + ctx->state = MTK_STATE_FREE;
> >>> + return -EINVAL;
> >>> + }
> >>> + ctx->state = MTK_STATE_HEADER;
> >>> + }
> >>> +
> >>> + INIT_WORK(&ctx->encode_work, mtk_venc_worker);
> >>> +
> >>> +#if MTK_V4L2_BENCHMARK
> >>> + do_gettimeofday(&end);
> >>> + ctx->total_enc_dec_init_time =
> >>> + ((end.tv_sec - begin.tv_sec) * 1000000 +
> >>> + end.tv_usec - begin.tv_usec);
> >>> +
> >>> +#endif
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static void vb2ops_venc_stop_streaming(struct vb2_queue *q)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(q);
> >>> + struct v4l2_device *v4l2_dev = &ctx->dev->v4l2_dev;
> >>> + struct vb2_buffer *src_buf, *dst_buf;
> >>> + int ret;
> >>> +
> >>> + mtk_v4l2_debug(2, "[%d]-> type=%d", ctx->idx, q->type);
> >>> +
> >>> + ctx->state = MTK_STATE_ABORT;
> >>> + queue_work(ctx->dev->encode_workqueue, &ctx->encode_work);
> >>> + ret = mtk_vcodec_wait_for_done_ctx(ctx,
> >>> + MTK_INST_WORK_THREAD_ABORT_DONE,
> >>> + WAIT_INTR_TIMEOUT, true);
> >>> +
> >>> + if (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
> >>> + while ((dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx))) {
> >>> + dst_buf->planes[0].bytesused = 0;
> >>> + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), VB2_BUF_STATE_DONE);
> >>
> >> This should be state ERROR since it doesn't actually contain any valid data.
> >>
> > We will fix this in next version.
> >
> >>> + }
> >>> + } else {
> >>> + while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx)))
> >>> + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), VB2_BUF_STATE_DONE);
> >>
> >> Ditto.
> >>
> >>> + }
> >>> +
> >>> + if ((q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE &&
> >>> + vb2_is_streaming(&ctx->m2m_ctx->out_q_ctx.q)) ||
> >>> + (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE &&
> >>> + vb2_is_streaming(&ctx->m2m_ctx->cap_q_ctx.q))) {
> >>> + mtk_v4l2_debug(1, "[%d]-> q type %d out=%d cap=%d",
> >>> + ctx->idx, q->type,
> >>> + vb2_is_streaming(&ctx->m2m_ctx->out_q_ctx.q),
> >>> + vb2_is_streaming(&ctx->m2m_ctx->cap_q_ctx.q));
> >>> + return;
> >>> + }
> >>> +
> >>> + ret = venc_if_release(ctx);
> >>> + if (ret)
> >>> + v4l2_err(v4l2_dev, "venc_if_release failed=%d\n", ret);
> >>> +
> >>> + ctx->state = MTK_STATE_FREE;
> >>> +}
> >>> +
> >>> +static struct vb2_ops mtk_venc_vb2_ops = {
> >>> + .queue_setup = vb2ops_venc_queue_setup,
> >>> + .buf_prepare = vb2ops_venc_buf_prepare,
> >>> + .buf_queue = vb2ops_venc_buf_queue,
> >>> + .wait_prepare = vb2_ops_wait_prepare,
> >>> + .wait_finish = vb2_ops_wait_finish,
> >>> + .start_streaming = vb2ops_venc_start_streaming,
> >>> + .stop_streaming = vb2ops_venc_stop_streaming,
> >>> +};
> >>> +
> >>> +static int mtk_venc_encode_header(void *priv)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = priv;
> >>> + struct v4l2_device *v4l2_dev = &ctx->dev->v4l2_dev;
> >>> + int ret;
> >>> + struct vb2_buffer *dst_buf;
> >>> + struct mtk_vcodec_mem bs_buf;
> >>> + struct venc_done_result enc_result;
> >>> +
> >>> + dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx);
> >>> + if (!dst_buf) {
> >>> + mtk_v4l2_debug(1, "No dst buffer");
> >>> + return -EINVAL;
> >>> + }
> >>> +
> >>> + bs_buf.va = vb2_plane_vaddr(dst_buf, 0);
> >>> + bs_buf.dma_addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0);
> >>> + bs_buf.size = (unsigned int)dst_buf->planes[0].length;
> >>> +
> >>> + mtk_v4l2_debug(1,
> >>> + "buf idx=%d va=0x%p dma_addr=0x%llx size=0x%lx",
> >>> + dst_buf->index, bs_buf.va,
> >>> + (u64)bs_buf.dma_addr, bs_buf.size);
> >>> +
> >>> + ret = venc_if_encode(ctx,
> >>> + VENC_START_OPT_ENCODE_SEQUENCE_HEADER,
> >>> + 0, &bs_buf, &enc_result);
> >>> +
> >>> + if (ret) {
> >>> + dst_buf->planes[0].bytesused = 0;
> >>> + ctx->state = MTK_STATE_ABORT;
> >>> + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), VB2_BUF_STATE_ERROR);
> >>> + v4l2_err(v4l2_dev, "venc_if_encode failed=%d", ret);
> >>> + return -EINVAL;
> >>> + }
> >>> +
> >>> + ctx->state = MTK_STATE_HEADER;
> >>> + dst_buf->planes[0].bytesused = enc_result.bs_size;
> >>> +
> >>> +#if defined(DEBUG)
> >>> +{
> >>> + int i;
> >>> + mtk_v4l2_debug(1, "venc_if_encode header len=%d",
> >>> + enc_result.bs_size);
> >>> + for (i = 0; i < enc_result.bs_size; i++) {
> >>> + unsigned char *p = (unsigned char *)bs_buf.va;
> >>> +
> >>> + mtk_v4l2_debug(1, "buf[%d]=0x%2x", i, p[i]);
> >>> + }
> >>> +}
> >>> +#endif
> >>> + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), VB2_BUF_STATE_DONE);
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static int mtk_venc_param_change(struct mtk_vcodec_ctx *ctx, void *priv)
> >>> +{
> >>> + struct vb2_buffer *vb = priv;
> >>> + struct mtk_video_enc_buf *buf =
> >>> + container_of(vb, struct mtk_video_enc_buf, b);
> >>> + int ret = 0;
> >>> +
> >>> + if (buf->param_change == MTK_ENCODE_PARAM_NONE)
> >>> + return 0;
> >>> +
> >>> + mtk_v4l2_debug(1, "encode parameters change id=%d", vb->index);
> >>> + if (buf->param_change & MTK_ENCODE_PARAM_BITRATE) {
> >>> + struct venc_enc_prm enc_prm;
> >>> +
> >>> + enc_prm.bitrate = buf->enc_params.bitrate;
> >>> + mtk_v4l2_debug(1, "change param br=%d",
> >>> + enc_prm.bitrate);
> >>> + ret |= venc_if_set_param(ctx,
> >>> + VENC_SET_PARAM_ADJUST_BITRATE,
> >>> + &enc_prm);
> >>> + }
> >>> + if (buf->param_change & MTK_ENCODE_PARAM_FRAMERATE) {
> >>> + struct venc_enc_prm enc_prm;
> >>> +
> >>> + enc_prm.frm_rate = buf->enc_params.framerate_num /
> >>> + buf->enc_params.framerate_denom;
> >>> + mtk_v4l2_debug(1, "change param fr=%d",
> >>> + enc_prm.frm_rate);
> >>> + ret |= venc_if_set_param(ctx,
> >>> + VENC_SET_PARAM_ADJUST_FRAMERATE,
> >>> + &enc_prm);
> >>> + }
> >>> + if (buf->param_change & MTK_ENCODE_PARAM_INTRA_PERIOD) {
> >>> + mtk_v4l2_debug(1, "change param intra period=%d",
> >>> + buf->enc_params.gop_size);
> >>> + ret |= venc_if_set_param(ctx,
> >>> + VENC_SET_PARAM_I_FRAME_INTERVAL,
> >>> + &buf->enc_params.gop_size);
> >>> + }
> >>> + if (buf->param_change & MTK_ENCODE_PARAM_FRAME_TYPE) {
> >>> + mtk_v4l2_debug(1, "change param force I=%d",
> >>> + buf->enc_params.force_intra);
> >>> + if (buf->enc_params.force_intra)
> >>> + ret |= venc_if_set_param(ctx,
> >>> + VENC_SET_PARAM_FORCE_INTRA,
> >>> + 0);
> >>> + }
> >>> + if (buf->param_change & MTK_ENCODE_PARAM_SKIP_FRAME) {
> >>> + mtk_v4l2_debug(1, "change param skip frame=%d",
> >>> + buf->enc_params.skip_frame);
> >>> + if (buf->enc_params.skip_frame)
> >>> + ret |= venc_if_set_param(ctx,
> >>> + VENC_SET_PARAM_SKIP_FRAME,
> >>> + 0);
> >>> + }
> >>> + buf->param_change = MTK_ENCODE_PARAM_NONE;
> >>> +
> >>> + if (ret) {
> >>> + ctx->state = MTK_STATE_ABORT;
> >>> + mtk_v4l2_err("venc_if_set_param %d failed=%d\n",
> >>> + MTK_ENCODE_PARAM_FRAME_TYPE, ret);
> >>> + return -1;
> >>> + }
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static void mtk_venc_worker(struct work_struct *work)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = container_of(work, struct mtk_vcodec_ctx,
> >>> + encode_work);
> >>> + struct vb2_buffer *src_buf, *dst_buf;
> >>> + struct vb2_v4l2_buffer *v4l2_vb;
> >>> + struct venc_frm_buf frm_buf;
> >>> + struct mtk_vcodec_mem bs_buf;
> >>> + struct venc_done_result enc_result;
> >>> + int ret;
> >>> +
> >>> +#if MTK_V4L2_BENCHMARK
> >>> + struct timeval begin, end;
> >>> + struct timeval begin1, end1;
> >>> + do_gettimeofday(&begin);
> >>> +#endif
> >>> + mutex_lock(&ctx->dev->dev_mutex);
> >>> +
> >>> + if (ctx->state == MTK_STATE_ABORT) {
> >>> + v4l2_m2m_job_finish(ctx->dev->m2m_dev_enc, ctx->m2m_ctx);
> >>> + mtk_v4l2_debug(0, "[%d] [MTK_INST_ABORT]", ctx->idx);
> >>> + ctx->int_cond = 1;
> >>> + ctx->int_type = MTK_INST_WORK_THREAD_ABORT_DONE;
> >>> + wake_up_interruptible(&ctx->queue);
> >>> + mutex_unlock(&ctx->dev->dev_mutex);
> >>> + return;
> >>> + }
> >>> +
> >>> + if ((ctx->q_data[MTK_Q_DATA_DST].fmt->fourcc ==
> >>> + V4L2_PIX_FMT_H264) &&
> >>> + (ctx->state != MTK_STATE_HEADER)) {
> >>> + /* encode h264 sps/pps header */
> >>> +#if MTK_V4L2_BENCHMARK
> >>> + do_gettimeofday(&begin1);
> >>> +#endif
> >>> + mtk_venc_encode_header(ctx);
> >>> +#if MTK_V4L2_BENCHMARK
> >>> + do_gettimeofday(&end1);
> >>> + ctx->total_enc_hdr_time +=
> >>> + ((end1.tv_sec - begin1.tv_sec) * 1000000 +
> >>> + end1.tv_usec - begin1.tv_usec);
> >>> +#endif
> >>> +
> >>> + v4l2_m2m_job_finish(ctx->dev->m2m_dev_enc, ctx->m2m_ctx);
> >>> + mutex_unlock(&ctx->dev->dev_mutex);
> >>> + return;
> >>> + }
> >>> +
> >>> + src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
> >>> + if (!src_buf) {
> >>> + mutex_unlock(&ctx->dev->dev_mutex);
> >>> + return;
> >>> + }
> >>> +
> >>> + mtk_venc_param_change(ctx, src_buf);
> >>> +
> >>> + dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx);
> >>> + if (!dst_buf) {
> >>> + mutex_unlock(&ctx->dev->dev_mutex);
> >>> + return;
> >>> + }
> >>> +
> >>> + frm_buf.fb_addr.va = vb2_plane_vaddr(src_buf, 0);
> >>> + frm_buf.fb_addr.dma_addr = vb2_dma_contig_plane_dma_addr(src_buf, 0);
> >>> + frm_buf.fb_addr.size = (unsigned int)src_buf->planes[0].length;
> >>> + frm_buf.fb_addr1.va = vb2_plane_vaddr(src_buf, 1);
> >>> + frm_buf.fb_addr1.dma_addr = vb2_dma_contig_plane_dma_addr(src_buf, 1);
> >>> + frm_buf.fb_addr1.size = (unsigned int)src_buf->planes[1].length;
> >>> + if (src_buf->num_planes == 3) {
> >>> + frm_buf.fb_addr2.va = vb2_plane_vaddr(src_buf, 2);
> >>> + frm_buf.fb_addr2.dma_addr =
> >>> + vb2_dma_contig_plane_dma_addr(src_buf, 2);
> >>> + frm_buf.fb_addr2.size =
> >>> + (unsigned int)src_buf->planes[2].length;
> >>> + } else {
> >>> + frm_buf.fb_addr2.va = NULL;
> >>> + frm_buf.fb_addr2.dma_addr = 0;
> >>> + frm_buf.fb_addr2.size = 0;
> >>> + }
> >>> + bs_buf.va = vb2_plane_vaddr(dst_buf, 0);
> >>> + bs_buf.dma_addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0);
> >>> + bs_buf.size = (unsigned int)dst_buf->planes[0].length;
> >>> +
> >>> + mtk_v4l2_debug(1,
> >>> + "Framebuf VA=%p PA=%llx Size=0x%lx;VA=%p PA=0x%llx Size=0x%lx;VA=%p PA=0x%llx Size=0x%lx",
> >>> + frm_buf.fb_addr.va,
> >>> + (u64)frm_buf.fb_addr.dma_addr,
> >>> + frm_buf.fb_addr.size,
> >>> + frm_buf.fb_addr1.va,
> >>> + (u64)frm_buf.fb_addr1.dma_addr,
> >>> + frm_buf.fb_addr1.size,
> >>> + frm_buf.fb_addr2.va,
> >>> + (u64)frm_buf.fb_addr2.dma_addr,
> >>> + frm_buf.fb_addr2.size);
> >>> +
> >>> + ret = venc_if_encode(ctx, VENC_START_OPT_ENCODE_FRAME,
> >>> + &frm_buf, &bs_buf, &enc_result);
> >>> +
> >>> + switch (enc_result.msg) {
> >>> + case VENC_MESSAGE_OK:
> >>> + src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
> >>> + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), VB2_BUF_STATE_DONE);
> >>> + dst_buf->planes[0].bytesused = enc_result.bs_size;
> >>> + break;
> >>> + default:
> >>> + src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
> >>> + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), VB2_BUF_STATE_ERROR);
> >>> + dst_buf->planes[0].bytesused = 0;
> >>> + break;
> >>> + }
> >>> + if (enc_result.is_key_frm) {
> >>> + v4l2_vb = to_vb2_v4l2_buffer(dst_buf);
> >>> + v4l2_vb->flags |= V4L2_BUF_FLAG_KEYFRAME;
> >>> + }
> >>> +
> >>> + if (ret) {
> >>> + ctx->state = MTK_STATE_ABORT;
> >>> + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), VB2_BUF_STATE_ERROR);
> >>> + mtk_v4l2_err("venc_if_encode failed=%d", ret);
> >>> + } else {
> >>> + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), VB2_BUF_STATE_DONE);
> >>> + mtk_v4l2_debug(1, "venc_if_encode bs size=%d",
> >>> + enc_result.bs_size);
> >>> + }
> >>> +
> >>> +#if MTK_V4L2_BENCHMARK
> >>> + do_gettimeofday(&end);
> >>> + ctx->total_enc_dec_cnt++;
> >>> + ctx->total_enc_dec_time +=
> >>> + ((end.tv_sec - begin.tv_sec) * 1000000 +
> >>> + end.tv_usec - begin.tv_usec);
> >>> +#endif
> >>> +
> >>> + v4l2_m2m_job_finish(ctx->dev->m2m_dev_enc, ctx->m2m_ctx);
> >>> +
> >>> + mtk_v4l2_debug(1, "<=== src_buf[%d] dst_buf[%d] venc_if_encode ret=%d Size=%u===>",
> >>> + src_buf->index, dst_buf->index, ret,
> >>> + enc_result.bs_size);
> >>> + mutex_unlock(&ctx->dev->dev_mutex);
> >>> +
> >>> +}
> >>> +
> >>> +static void m2mops_venc_device_run(void *priv)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = priv;
> >>> + queue_work(ctx->dev->encode_workqueue, &ctx->encode_work);
> >>> +}
> >>> +
> >>> +static int m2mops_venc_job_ready(void *m2m_priv)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = m2m_priv;
> >>> +
> >>> + if (!v4l2_m2m_num_dst_bufs_ready(ctx->m2m_ctx)) {
> >>> + mtk_v4l2_debug(3,
> >>> + "[%d]Not ready: not enough video dst buffers.",
> >>> + ctx->idx);
> >>> + return 0;
> >>> + }
> >>> +
> >>> + if (!v4l2_m2m_num_src_bufs_ready(ctx->m2m_ctx)) {
> >>> + mtk_v4l2_debug(3,
> >>> + "[%d]Not ready: not enough video src buffers.",
> >>> + ctx->idx);
> >>> + return 0;
> >>> + }
> >>> +
> >>> + if (ctx->state == MTK_STATE_ABORT) {
> >>> + mtk_v4l2_debug(3,
> >>> + "[%d]Not ready: state=0x%x.",
> >>> + ctx->idx, ctx->state);
> >>> + return 0;
> >>> + }
> >>> +
> >>> + if (ctx->state == MTK_STATE_FREE) {
> >>> + mtk_v4l2_debug(3,
> >>> + "[%d]Not ready: state=0x%x.",
> >>> + ctx->idx, ctx->state);
> >>> + return 0;
> >>> + }
> >>> +
> >>> + mtk_v4l2_debug(3, "[%d]ready!", ctx->idx);
> >>> +
> >>> + return 1;
> >>> +}
> >>> +
> >>> +static void m2mops_venc_job_abort(void *priv)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = priv;
> >>> +
> >>> + mtk_v4l2_debug(3, "[%d]type=%d", ctx->idx, ctx->type);
> >>> + ctx->state = MTK_STATE_ABORT;
> >>> +
> >>> + v4l2_m2m_job_finish(ctx->dev->m2m_dev_enc, ctx->m2m_ctx);
> >>> +}
> >>> +
> >>> +static void m2mops_venc_lock(void *m2m_priv)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = m2m_priv;
> >>> +
> >>> + mutex_lock(&ctx->dev->dev_mutex);
> >>> +}
> >>> +
> >>> +static void m2mops_venc_unlock(void *m2m_priv)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = m2m_priv;
> >>> +
> >>> + mutex_unlock(&ctx->dev->dev_mutex);
> >>> +}
> >>> +
> >>> +const struct v4l2_m2m_ops mtk_venc_m2m_ops = {
> >>> + .device_run = m2mops_venc_device_run,
> >>> + .job_ready = m2mops_venc_job_ready,
> >>> + .job_abort = m2mops_venc_job_abort,
> >>> + .lock = m2mops_venc_lock,
> >>> + .unlock = m2mops_venc_unlock,
> >>> +};
> >>> +
> >>> +#define IS_MTK_VENC_PRIV(x) ((V4L2_CTRL_ID2CLASS(x) == V4L2_CTRL_CLASS_MPEG) &&\
> >>> + V4L2_CTRL_DRIVER_PRIV(x))
> >>> +
> >>> +static const char *const *mtk_vcodec_enc_get_menu(u32 id)
> >>> +{
> >>> + static const char *const mtk_vcodec_enc_video_frame_skip[] = {
> >>> + "Disabled",
> >>> + "Level Limit",
> >>> + "VBV/CPB Limit",
> >>> + NULL,
> >>> + };
> >>> + static const char *const mtk_vcodec_enc_video_force_frame[] = {
> >>> + "Disabled",
> >>> + "I Frame",
> >>> + "Not Coded",
> >>> + NULL,
> >>> + };
> >>> + switch (id) {
> >>> + case V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE:
> >>> + return mtk_vcodec_enc_video_frame_skip;
> >>> + case V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE:
> >>> + return mtk_vcodec_enc_video_force_frame;
> >>> + }
> >>> + return NULL;
> >>> +}
> >>> +
> >>> +int mtk_venc_ctrls_setup(struct mtk_vcodec_ctx *ctx)
> >>> +{
> >>> + struct v4l2_ctrl_config cfg;
> >>> + int i;
> >>> +
> >>> + v4l2_ctrl_handler_init(&ctx->ctrl_hdl, NUM_CTRLS);
> >>> + if (ctx->ctrl_hdl.error) {
> >>> + v4l2_err(&ctx->dev->v4l2_dev, "Init control handler fail %d\n",
> >>> + ctx->ctrl_hdl.error);
> >>> + return ctx->ctrl_hdl.error;
> >>> + }
> >>> + for (i = 0; i < NUM_CTRLS; i++) {
> >>> + if (IS_MTK_VENC_PRIV(controls[i].id)) {
> >>> + memset(&cfg, 0, sizeof(struct v4l2_ctrl_config));
> >>> + cfg.ops = &mtk_vcodec_enc_ctrl_ops;
> >>> + cfg.id = controls[i].id;
> >>> + cfg.min = controls[i].minimum;
> >>> + cfg.max = controls[i].maximum;
> >>> + cfg.def = controls[i].default_value;
> >>> + cfg.name = controls[i].name;
> >>> + cfg.type = controls[i].type;
> >>> + cfg.flags = 0;
> >>> + if (cfg.type == V4L2_CTRL_TYPE_MENU) {
> >>> + cfg.step = 0;
> >>> + cfg.menu_skip_mask = cfg.menu_skip_mask;
> >>> + cfg.qmenu = mtk_vcodec_enc_get_menu(cfg.id);
> >>> + } else {
> >>> + cfg.step = controls[i].step;
> >>> + cfg.menu_skip_mask = 0;
> >>> + }
> >>> + v4l2_ctrl_new_custom(&ctx->ctrl_hdl, &cfg, NULL);
> >>> + } else {
> >>> + if ((controls[i].type == V4L2_CTRL_TYPE_MENU) ||
> >>> + (controls[i].type == V4L2_CTRL_TYPE_INTEGER_MENU)) {
> >>> + v4l2_ctrl_new_std_menu(
> >>> + &ctx->ctrl_hdl,
> >>> + &mtk_vcodec_enc_ctrl_ops,
> >>> + controls[i].id,
> >>> + controls[i].maximum, 0,
> >>> + controls[i].default_value);
> >>> + } else {
> >>> + v4l2_ctrl_new_std(
> >>> + &ctx->ctrl_hdl,
> >>> + &mtk_vcodec_enc_ctrl_ops,
> >>> + controls[i].id,
> >>> + controls[i].minimum,
> >>> + controls[i].maximum,
> >>> + controls[i].step,
> >>> + controls[i].default_value);
> >>> + }
> >>> + }
> >>> +
> >>> + if (ctx->ctrl_hdl.error) {
> >>> + v4l2_err(&ctx->dev->v4l2_dev,
> >>> + "Adding control (%d) failed %d\n",
> >>> + i, ctx->ctrl_hdl.error);
> >>> + return ctx->ctrl_hdl.error;
> >>> + }
> >>> + }
> >>> +
> >>> + v4l2_ctrl_handler_setup(&ctx->ctrl_hdl);
> >>> + return 0;
> >>> +}
> >>> +
> >>> +void mtk_venc_ctrls_free(struct mtk_vcodec_ctx *ctx)
> >>> +{
> >>> + v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
> >>
> >> Why not call v4l2_ctrl_handler_free() directly instead of going through
> >> an unnecessary wrapper function?
> >>
> > We will remove all unnecessary wrapper function in next version.
> >
> >>> +}
> >>> +
> >>> +int m2mctx_venc_queue_init(void *priv, struct vb2_queue *src_vq,
> >>> + struct vb2_queue *dst_vq)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = priv;
> >>> + int ret;
> >>> +
> >>> + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
> >>> + src_vq->io_modes = VB2_DMABUF | VB2_MMAP | VB2_USERPTR;
> >>
> >> You're using videobuf2-dma-contig, so VB2_USERPTR is generally useless in that
> >> case. I would drop it.
> >>
> > Sorry, I don't get it.
> > We are using videobuf2-dma-contig, but we also using VB2_USERPTR.
>
> ???? In that case the user pointer you pass in must point to physically contiguous
> memory. Which means you got it through some magic. Typically what should be used
> are dmabuf handles to pass buffers around between different subsystems.
>
> The use of VB2_USERPTR for that purpose is deprecated.
>
> Or am I misunderstanding you as well?
>
Our encoder support all three modes.
In case that A driver + Encode driver flow, OUTPUT buffer will be
VB2_DMABUF from A driver.
In case that read YCbCr frame data from file and encode them to bit
stream flow, we use VB2_USERPTR and VB2_MMAP.
In VB2_USERPTR case, videobuf2-dma-contig will help us get continuous
dma address.
Our chip has IOMMU and M4U that help us get continuous phy address for
encode HW.
http://lists.infradead.org/pipermail/linux-mediatek/2015-October/002525.html
> >
> >>> + src_vq->drv_priv = ctx;
> >>> + src_vq->buf_struct_size = sizeof(struct mtk_video_enc_buf);
> >>> + src_vq->ops = &mtk_venc_vb2_ops;
> >>> + src_vq->mem_ops = &vb2_dma_contig_memops;
> >>> + src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
> >>> + src_vq->lock = &ctx->vb2_mutex;
> >>> +
> >>> + ret = vb2_queue_init(src_vq);
> >>> + if (ret)
> >>> + return ret;
> >>> +
> >>> + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
> >>> + dst_vq->io_modes = VB2_DMABUF | VB2_MMAP | VB2_USERPTR;
> >>
> >> Ditto.
> >>
> > Our CAPTURE buffer do not use VB2_USERPTR, we will remove it in next
> > version.
> >
> >>> + dst_vq->drv_priv = ctx;
> >>> + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
> >>> + dst_vq->ops = &mtk_venc_vb2_ops;
> >>> + dst_vq->mem_ops = &vb2_dma_contig_memops;
> >>> + dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
> >>> + dst_vq->lock = &ctx->vb2_mutex;
> >>> +
> >>> + return vb2_queue_init(dst_vq);
> >>> +}
> >>> +
> >>> +int mtk_venc_unlock(struct mtk_vcodec_ctx *ctx)
> >>> +{
> >>> + struct mtk_vcodec_dev *dev = ctx->dev;
> >>> +
> >>> + mutex_unlock(&dev->enc_mutex);
> >>> + return 0;
> >>> +}
> >>> +
> >>> +int mtk_venc_lock(struct mtk_vcodec_ctx *ctx)
> >>> +{
> >>> + struct mtk_vcodec_dev *dev = ctx->dev;
> >>> +
> >>> + mutex_lock(&dev->enc_mutex);
> >>> + dev->curr_ctx = ctx->idx;
> >>> + return 0;
> >>> +}
> >>> +
> >>> +void mtk_vcodec_venc_release(struct mtk_vcodec_ctx *ctx)
> >>> +{
> >>> + venc_if_release(ctx);
> >>> +
> >>> +#if MTK_V4L2_BENCHMARK
> >>> + mtk_v4l2_debug(0, "\n\nMTK_V4L2_BENCHMARK");
> >>> +
> >>> + mtk_v4l2_debug(0, " total_enc_dec_cnt: %d ", ctx->total_enc_dec_cnt);
> >>> + mtk_v4l2_debug(0, " total_enc_dec_time: %d us",
> >>> + ctx->total_enc_dec_time);
> >>> + mtk_v4l2_debug(0, " total_enc_dec_init_time: %d us",
> >>> + ctx->total_enc_dec_init_time);
> >>> + mtk_v4l2_debug(0, " total_enc_hdr_time: %d us",
> >>> + ctx->total_enc_hdr_time);
> >>> + mtk_v4l2_debug(0, " total_qbuf_out_time: %d us",
> >>> + ctx->total_qbuf_out_time);
> >>> + mtk_v4l2_debug(0, " total_qbuf_out_cnt: %d ",
> >>> + ctx->total_qbuf_out_cnt);
> >>> + mtk_v4l2_debug(0, " total_qbuf_cap_time: %d us",
> >>> + ctx->total_qbuf_cap_time);
> >>> + mtk_v4l2_debug(0, " total_qbuf_cap_cnt: %d ",
> >>> + ctx->total_qbuf_cap_cnt);
> >>> +
> >>> + mtk_v4l2_debug(0, " total_dqbuf_out_time: %d us",
> >>> + ctx->total_dqbuf_out_time);
> >>> + mtk_v4l2_debug(0, " total_dqbuf_out_cnt: %d ",
> >>> + ctx->total_dqbuf_out_cnt);
> >>> + mtk_v4l2_debug(0, " total_dqbuf_cap_time: %d us",
> >>> + ctx->total_dqbuf_cap_time);
> >>> + mtk_v4l2_debug(0, " total_dqbuf_cap_cnt: %d ",
> >>> + ctx->total_dqbuf_cap_cnt);
> >>> +
> >>> + mtk_v4l2_debug(0, " total_expbuf_time: %d us",
> >>> + ctx->total_expbuf_time);
> >>> +
> >>> +#endif
> >>> +
> >>> +}
> >>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.h
> >>> new file mode 100644
> >>> index 0000000..0d6b79a
> >>> --- /dev/null
> >>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.h
> >>> @@ -0,0 +1,45 @@
> >>> +/*
> >>> +* Copyright (c) 2015 MediaTek Inc.
> >>> +* Author: PC Chen <pc.chen@...iatek.com>
> >>> +* Tiffany Lin <tiffany.lin@...iatek.com>
> >>> +*
> >>> +* This program is free software; you can redistribute it and/or modify
> >>> +* it under the terms of the GNU General Public License version 2 as
> >>> +* published by the Free Software Foundation.
> >>> +*
> >>> +* This program is distributed in the hope that it will be useful,
> >>> +* but WITHOUT ANY WARRANTY; without even the implied warranty of
> >>> +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> >>> +* GNU General Public License for more details.
> >>> +*/
> >>> +
> >>> +
> >>> +#ifndef _MTK_VCODEC_ENC_H_
> >>> +#define _MTK_VCODEC_ENC_H_
> >>> +
> >>> +#include <media/videobuf2-core.h>
> >>> +
> >>> +/**
> >>> + * struct mtk_video_enc_buf - Private data related to each VB2 buffer.
> >>> + * @b: Pointer to related VB2 buffer.
> >>> + * @param_change: Types of encode parameter change before encode this
> >>> + * buffer
> >>> + * @enc_params Encode parameters changed before encode this buffer
> >>> + */
> >>> +struct mtk_video_enc_buf {
> >>> + struct vb2_buffer b;
> >>> + struct list_head list;
> >>> +
> >>> + enum mtk_encode_param param_change;
> >>> + struct mtk_enc_params enc_params;
> >>> +};
> >>> +
> >>> +int mtk_venc_unlock(struct mtk_vcodec_ctx *ctx);
> >>> +int mtk_venc_lock(struct mtk_vcodec_ctx *ctx);
> >>> +int m2mctx_venc_queue_init(void *priv, struct vb2_queue *src_vq,
> >>> + struct vb2_queue *dst_vq);
> >>> +void mtk_vcodec_venc_release(struct mtk_vcodec_ctx *ctx);
> >>> +int mtk_venc_ctrls_setup(struct mtk_vcodec_ctx *ctx);
> >>> +void mtk_venc_ctrls_free(struct mtk_vcodec_ctx *ctx);
> >>> +
> >>> +#endif /* _MTK_VCODEC_ENC_H_ */
> >>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
> >>> new file mode 100644
> >>> index 0000000..116ab97
> >>> --- /dev/null
> >>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
> >>> @@ -0,0 +1,469 @@
> >>> +/*
> >>> +* Copyright (c) 2015 MediaTek Inc.
> >>> +* Author: PC Chen <pc.chen@...iatek.com>
> >>> +* Tiffany Lin <tiffany.lin@...iatek.com>
> >>> +*
> >>> +* This program is free software; you can redistribute it and/or modify
> >>> +* it under the terms of the GNU General Public License version 2 as
> >>> +* published by the Free Software Foundation.
> >>> +*
> >>> +* This program is distributed in the hope that it will be useful,
> >>> +* but WITHOUT ANY WARRANTY; without even the implied warranty of
> >>> +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> >>> +* GNU General Public License for more details.
> >>> +*/
> >>> +
> >>> +#include <linux/interrupt.h>
> >>> +#include <linux/irq.h>
> >>> +#include <linux/module.h>
> >>> +#include <linux/of_device.h>
> >>> +#include <linux/of.h>
> >>> +#include <media/v4l2-event.h>
> >>> +#include <media/v4l2-mem2mem.h>
> >>> +#include <media/videobuf2-dma-contig.h>
> >>> +#include <linux/pm_runtime.h>
> >>> +
> >>> +#include "mtk_vcodec_drv.h"
> >>> +#include "mtk_vcodec_enc.h"
> >>> +#include "mtk_vcodec_pm.h"
> >>> +#include "mtk_vcodec_intr.h"
> >>> +#include "mtk_vcodec_util.h"
> >>> +#include "mtk_vpu.h"
> >>> +
> >>> +static irqreturn_t mtk_vcodec_enc_irq_handler(int irq, void *priv);
> >>> +
> >>> +/* Wake up context wait_queue */
> >>> +static void wake_up_ctx(struct mtk_vcodec_ctx *ctx, unsigned int reason)
> >>> +{
> >>> + ctx->int_cond = 1;
> >>> + ctx->int_type = reason;
> >>> + wake_up_interruptible(&ctx->queue);
> >>> +}
> >>> +
> >>> +static irqreturn_t mtk_vcodec_enc_irq_handler(int irq, void *priv)
> >>> +{
> >>> + struct mtk_vcodec_dev *dev = priv;
> >>> + struct mtk_vcodec_ctx *ctx;
> >>> + unsigned int irq_status;
> >>> +
> >>> + ctx = dev->ctx[dev->curr_ctx];
> >>> + if (ctx == NULL) {
> >>> + mtk_v4l2_err("ctx==NULL");
> >>> + return IRQ_HANDLED;
> >>> + }
> >>> + mtk_v4l2_debug(1, "idx=%d", ctx->idx);
> >>> + irq_status = readl(dev->reg_base[VENC_SYS] +
> >>> + (MTK_VENC_IRQ_STATUS_OFFSET));
> >>> + if (irq_status & MTK_VENC_IRQ_STATUS_PAUSE)
> >>> + writel((MTK_VENC_IRQ_STATUS_PAUSE),
> >>> + dev->reg_base[VENC_SYS] + (MTK_VENC_IRQ_ACK_OFFSET));
> >>> +
> >>> + if (irq_status & MTK_VENC_IRQ_STATUS_SWITCH)
> >>> + writel((MTK_VENC_IRQ_STATUS_SWITCH),
> >>> + dev->reg_base[VENC_SYS] + (MTK_VENC_IRQ_ACK_OFFSET));
> >>> +
> >>> + if (irq_status & MTK_VENC_IRQ_STATUS_DRAM)
> >>> + writel((MTK_VENC_IRQ_STATUS_DRAM),
> >>> + dev->reg_base[VENC_SYS] + (MTK_VENC_IRQ_ACK_OFFSET));
> >>> +
> >>> + if (irq_status & MTK_VENC_IRQ_STATUS_SPS)
> >>> + writel((MTK_VENC_IRQ_STATUS_SPS),
> >>> + dev->reg_base[VENC_SYS] + (MTK_VENC_IRQ_ACK_OFFSET));
> >>> +
> >>> + if (irq_status & MTK_VENC_IRQ_STATUS_PPS)
> >>> + writel((MTK_VENC_IRQ_STATUS_PPS),
> >>> + dev->reg_base[VENC_SYS] + (MTK_VENC_IRQ_ACK_OFFSET));
> >>> +
> >>> + if (irq_status & MTK_VENC_IRQ_STATUS_FRM)
> >>> + writel((MTK_VENC_IRQ_STATUS_FRM),
> >>> + dev->reg_base[VENC_SYS] + (MTK_VENC_IRQ_ACK_OFFSET));
> >>> +
> >>> + ctx->irq_status = irq_status;
> >>> + wake_up_ctx(ctx, MTK_INST_IRQ_RECEIVED);
> >>> + return IRQ_HANDLED;
> >>> +}
> >>> +
> >>> +#if 1 /* VENC_LT */
> >>> +static irqreturn_t mtk_vcodec_enc_irq_handler2(int irq, void *priv)
> >>> +{
> >>> + struct mtk_vcodec_dev *dev = priv;
> >>> + struct mtk_vcodec_ctx *ctx;
> >>> + unsigned int irq_status;
> >>> +
> >>> + ctx = dev->ctx[dev->curr_ctx];
> >>> + if (ctx == NULL) {
> >>> + mtk_v4l2_err("ctx==NULL");
> >>> + return IRQ_HANDLED;
> >>> + }
> >>> + mtk_v4l2_debug(1, "idx=%d", ctx->idx);
> >>> + irq_status = readl(dev->reg_base[VENC_LT_SYS] +
> >>> + (MTK_VENC_IRQ_STATUS_OFFSET));
> >>> + if (irq_status & MTK_VENC_IRQ_STATUS_PAUSE)
> >>> + writel((MTK_VENC_IRQ_STATUS_PAUSE),
> >>> + dev->reg_base[VENC_LT_SYS] + (MTK_VENC_IRQ_ACK_OFFSET));
> >>> +
> >>> + if (irq_status & MTK_VENC_IRQ_STATUS_SWITCH)
> >>> + writel((MTK_VENC_IRQ_STATUS_SWITCH),
> >>> + dev->reg_base[VENC_LT_SYS] + (MTK_VENC_IRQ_ACK_OFFSET));
> >>> +
> >>> + if (irq_status & MTK_VENC_IRQ_STATUS_DRAM)
> >>> + writel((MTK_VENC_IRQ_STATUS_DRAM),
> >>> + dev->reg_base[VENC_LT_SYS] + (MTK_VENC_IRQ_ACK_OFFSET));
> >>> +
> >>> + if (irq_status & MTK_VENC_IRQ_STATUS_SPS)
> >>> + writel((MTK_VENC_IRQ_STATUS_SPS),
> >>> + dev->reg_base[VENC_LT_SYS] + (MTK_VENC_IRQ_ACK_OFFSET));
> >>> +
> >>> + if (irq_status & MTK_VENC_IRQ_STATUS_PPS)
> >>> + writel((MTK_VENC_IRQ_STATUS_PPS),
> >>> + dev->reg_base[VENC_LT_SYS] + (MTK_VENC_IRQ_ACK_OFFSET));
> >>> +
> >>> + if (irq_status & MTK_VENC_IRQ_STATUS_FRM)
> >>> + writel((MTK_VENC_IRQ_STATUS_FRM),
> >>> + dev->reg_base[VENC_LT_SYS] + (MTK_VENC_IRQ_ACK_OFFSET));
> >>> +
> >>> + ctx->irq_status = irq_status;
> >>> + wake_up_ctx(ctx, MTK_INST_IRQ_RECEIVED);
> >>> + return IRQ_HANDLED;
> >>> +}
> >>> +#endif
> >>> +
> >>> +static int fops_vcodec_open(struct file *file)
> >>> +{
> >>> + struct video_device *vfd = video_devdata(file);
> >>> + struct mtk_vcodec_dev *dev = video_drvdata(file);
> >>> + struct mtk_vcodec_ctx *ctx = NULL;
> >>> + int ret = 0;
> >>> +
> >>> + mutex_lock(&dev->dev_mutex);
> >>> +
> >>> + ctx = devm_kzalloc(&dev->plat_dev->dev, sizeof(*ctx), GFP_KERNEL);
> >>> + if (!ctx) {
> >>> + ret = -ENOMEM;
> >>> + goto err_alloc;
> >>> + }
> >>> +
> >>> + if (dev->num_instances >= MTK_VCODEC_MAX_ENCODER_INSTANCES) {
> >>> + mtk_v4l2_err("Too many open contexts\n");
> >>> + ret = -EBUSY;
> >>> + goto err_no_ctx;
> >>> + }
> >>> +
> >>> + ctx->idx = ffz(dev->instance_mask[0]);
> >>> + v4l2_fh_init(&ctx->fh, video_devdata(file));
> >>> + file->private_data = &ctx->fh;
> >>> + v4l2_fh_add(&ctx->fh);
> >>> + ctx->dev = dev;
> >>> + mutex_init(&ctx->encode_param_mutex);
> >>> + mutex_init(&ctx->vb2_mutex);
> >>> +
> >>> + if (vfd == dev->vfd_enc) {
> >>> + ctx->type = MTK_INST_ENCODER;
> >>> + ret = mtk_venc_ctrls_setup(ctx);
> >>> + if (ret) {
> >>> + mtk_v4l2_err("Failed to setup controls() (%d)\n",
> >>> + ret);
> >>> + goto err_ctrls_setup;
> >>> + }
> >>> + ctx->m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev_enc, ctx,
> >>> + &m2mctx_venc_queue_init);
> >>> + if (IS_ERR(ctx->m2m_ctx)) {
> >>> + ret = PTR_ERR(ctx->m2m_ctx);
> >>> + mtk_v4l2_err("Failed to v4l2_m2m_ctx_init() (%d)\n",
> >>> + ret);
> >>> + goto err_ctx_init;
> >>> + }
> >>> + ctx->fh.ctrl_handler = &ctx->ctrl_hdl;
> >>> + } else {
> >>> + mtk_v4l2_err("Invalid vfd !\n");
> >>> + ret = -ENOENT;
> >>> + goto err_ctx_init;
> >>> + }
> >>> +
> >>> + init_waitqueue_head(&ctx->queue);
> >>> + dev->num_instances++;
> >>> +
> >>> + if (dev->num_instances == 1) {
> >>> + ret = vpu_load_firmware(dev->vpu_plat_dev);
> >>> + if (ret < 0) {
> >>> + mtk_v4l2_err("vpu_load_firmware failed!\n");
> >>> + goto err_load_fw;
> >>> + }
> >>> +
> >>> + dev->enc_capability =
> >>> + vpu_get_venc_hw_capa(dev->vpu_plat_dev);
> >>> + mtk_v4l2_debug(0, "encoder capability %x", dev->enc_capability);
> >>> + }
> >>> +
> >>> + mtk_v4l2_debug(2, "Create instance [%d]@%p m2m_ctx=%p type=%d\n",
> >>> + ctx->idx, ctx, ctx->m2m_ctx, ctx->type);
> >>> + set_bit(ctx->idx, &dev->instance_mask[0]);
> >>> + dev->ctx[ctx->idx] = ctx;
> >>> +
> >>> + mutex_unlock(&dev->dev_mutex);
> >>> + mtk_v4l2_debug(0, "%s encoder [%d]", dev_name(&dev->plat_dev->dev), ctx->idx);
> >>> + return ret;
> >>> +
> >>> + /* Deinit when failure occurred */
> >>> +err_load_fw:
> >>> + v4l2_m2m_ctx_release(ctx->m2m_ctx);
> >>> + v4l2_fh_del(&ctx->fh);
> >>> + v4l2_fh_exit(&ctx->fh);
> >>> + dev->num_instances--;
> >>> +err_ctx_init:
> >>> +err_ctrls_setup:
> >>> + mtk_venc_ctrls_free(ctx);
> >>> +err_no_ctx:
> >>> + devm_kfree(&dev->plat_dev->dev, ctx);
> >>> +err_alloc:
> >>> + mutex_unlock(&dev->dev_mutex);
> >>> + return ret;
> >>> +}
> >>> +
> >>> +static int fops_vcodec_release(struct file *file)
> >>> +{
> >>> + struct mtk_vcodec_dev *dev = video_drvdata(file);
> >>> + struct mtk_vcodec_ctx *ctx = fh_to_ctx(file->private_data);
> >>> +
> >>> + mtk_v4l2_debug(2, "[%d]\n", ctx->idx);
> >>> + mutex_lock(&dev->dev_mutex);
> >>> + v4l2_m2m_ctx_release(ctx->m2m_ctx);
> >>> + mtk_vcodec_venc_release(ctx);
> >>> + mtk_venc_ctrls_free(ctx);
> >>> + v4l2_fh_del(&ctx->fh);
> >>> + v4l2_fh_exit(&ctx->fh);
> >>> + dev->ctx[ctx->idx] = NULL;
> >>> + dev->num_instances--;
> >>> + clear_bit(ctx->idx, &dev->instance_mask[0]);
> >>> + devm_kfree(&dev->plat_dev->dev, ctx);
> >>> + mutex_unlock(&dev->dev_mutex);
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static unsigned int fops_vcodec_poll(struct file *file,
> >>> + struct poll_table_struct *wait)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = fh_to_ctx(file->private_data);
> >>> + struct mtk_vcodec_dev *dev = ctx->dev;
> >>> + int ret;
> >>> +
> >>> + mutex_lock(&dev->dev_mutex);
> >>> + ret = v4l2_m2m_poll(file, ctx->m2m_ctx, wait);
> >>> + mutex_unlock(&dev->dev_mutex);
> >>
> >> Use v4l2_m2m_fop_poll instead.
> >>
> > We will fix this in next version.
> >
> >>> +
> >>> + return ret;
> >>> +}
> >>> +
> >>> +static int fops_vcodec_mmap(struct file *file, struct vm_area_struct *vma)
> >>> +{
> >>> + struct mtk_vcodec_ctx *ctx = fh_to_ctx(file->private_data);
> >>> +
> >>> + return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma);
> >>
> >> v4l2_m2m_fop_mmap
> >>
> > We will fix this in next version.
> >
> >>> +}
> >>> +
> >>> +static const struct v4l2_file_operations mtk_vcodec_fops = {
> >>> + .owner = THIS_MODULE,
> >>> + .open = fops_vcodec_open,
> >>> + .release = fops_vcodec_release,
> >>> + .poll = fops_vcodec_poll,
> >>> + .unlocked_ioctl = video_ioctl2,
> >>> + .mmap = fops_vcodec_mmap,
> >>> +};
> >>> +
> >>> +static int mtk_vcodec_probe(struct platform_device *pdev)
> >>> +{
> >>> + struct mtk_vcodec_dev *dev;
> >>> + struct video_device *vfd_enc;
> >>> + struct resource *res;
> >>> + int i, j, ret;
> >>> +
> >>> + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
> >>> + if (!dev)
> >>> + return -ENOMEM;
> >>> +
> >>> + dev->plat_dev = pdev;
> >>> +
> >>> + dev->vpu_plat_dev = vpu_get_plat_device(dev->plat_dev);
> >>> + if (dev->vpu_plat_dev == NULL) {
> >>> + mtk_v4l2_err("[VPU] vpu device in not ready\n");
> >>> + return -EPROBE_DEFER;
> >>> + }
> >>> +
> >>> + ret = mtk_vcodec_init_enc_pm(dev);
> >>> + if (ret < 0) {
> >>> + dev_err(&pdev->dev, "Failed to get mt vcodec clock source!\n");
> >>> + return ret;
> >>> + }
> >>> +
> >>> + for (i = VENC_SYS, j = 0; i < NUM_MAX_VCODEC_REG_BASE; i++, j++) {
> >>> + res = platform_get_resource(pdev, IORESOURCE_MEM, j);
> >>> + if (res == NULL) {
> >>> + dev_err(&pdev->dev, "get memory resource failed.\n");
> >>> + ret = -ENXIO;
> >>> + goto err_res;
> >>> + }
> >>> + dev->reg_base[i] = devm_ioremap_resource(&pdev->dev, res);
> >>> + if (IS_ERR(dev->reg_base[i])) {
> >>> + dev_err(&pdev->dev,
> >>> + "devm_ioremap_resource %d failed.\n", i);
> >>> + ret = PTR_ERR(dev->reg_base);
> >>> + goto err_res;
> >>> + }
> >>> + mtk_v4l2_debug(2, "reg[%d] base=0x%p\n", i, dev->reg_base[i]);
> >>> + }
> >>> +
> >>> + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> >>> + if (res == NULL) {
> >>> + dev_err(&pdev->dev, "failed to get irq resource\n");
> >>> + ret = -ENOENT;
> >>> + goto err_res;
> >>> + }
> >>> +
> >>> + dev->enc_irq = platform_get_irq(pdev, 0);
> >>> + ret = devm_request_irq(&pdev->dev, dev->enc_irq,
> >>> + mtk_vcodec_enc_irq_handler,
> >>> + 0, pdev->name, dev);
> >>> + if (ret) {
> >>> + dev_err(&pdev->dev, "Failed to install dev->enc_irq %d (%d)\n",
> >>> + dev->enc_irq,
> >>> + ret);
> >>> + ret = -EINVAL;
> >>> + goto err_res;
> >>> + }
> >>> +
> >>> + dev->enc_lt_irq = platform_get_irq(pdev, 1);
> >>> + ret = devm_request_irq(&pdev->dev,
> >>> + dev->enc_lt_irq, mtk_vcodec_enc_irq_handler2,
> >>> + 0, pdev->name, dev);
> >>> + if (ret) {
> >>> + dev_err(&pdev->dev,
> >>> + "Failed to install dev->enc_lt_irq %d (%d)\n",
> >>> + dev->enc_lt_irq, ret);
> >>> + ret = -EINVAL;
> >>> + goto err_res;
> >>> + }
> >>> +
> >>> + disable_irq(dev->enc_irq);
> >>> + disable_irq(dev->enc_lt_irq); /* VENC_LT */
> >>> + mutex_init(&dev->enc_mutex);
> >>> + mutex_init(&dev->dev_mutex);
> >>> +
> >>> + snprintf(dev->v4l2_dev.name, sizeof(dev->v4l2_dev.name), "%s",
> >>> + "[MTK_V4L2_VENC]");
> >>> +
> >>> + ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
> >>> + if (ret) {
> >>> + mtk_v4l2_err("v4l2_device_register err=%d\n", ret);
> >>> + return ret;
> >>> + }
> >>> +
> >>> + init_waitqueue_head(&dev->queue);
> >>> +
> >>> + /* allocate video device for encoder and register it */
> >>> + vfd_enc = video_device_alloc();
> >>> + if (!vfd_enc) {
> >>> + mtk_v4l2_err("Failed to allocate video device\n");
> >>> + ret = -ENOMEM;
> >>> + goto err_enc_alloc;
> >>> + }
> >>> + vfd_enc->fops = &mtk_vcodec_fops;
> >>> + vfd_enc->ioctl_ops = &mtk_venc_ioctl_ops;
> >>> + vfd_enc->release = video_device_release;
> >>> + vfd_enc->lock = &dev->dev_mutex;
> >>> + vfd_enc->v4l2_dev = &dev->v4l2_dev;
> >>> + vfd_enc->vfl_dir = VFL_DIR_M2M;
> >>> +
> >>> + snprintf(vfd_enc->name, sizeof(vfd_enc->name), "%s",
> >>> + MTK_VCODEC_ENC_NAME);
> >>> + video_set_drvdata(vfd_enc, dev);
> >>> + dev->vfd_enc = vfd_enc;
> >>> + platform_set_drvdata(pdev, dev);
> >>> + ret = video_register_device(vfd_enc, VFL_TYPE_GRABBER, 1);
> >>> + if (ret) {
> >>> + mtk_v4l2_err("Failed to register video device\n");
> >>> + goto err_enc_reg;
> >>> + }
> >>> + mtk_v4l2_debug(0, "encoder registered as /dev/video%d\n",
> >>> + vfd_enc->num);
> >>> +
> >>> + dev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
> >>> + if (IS_ERR(dev->alloc_ctx)) {
> >>> + mtk_v4l2_err("Failed to alloc vb2 dma context 0\n");
> >>> + ret = PTR_ERR(dev->alloc_ctx);
> >>> + goto err_vb2_ctx_init;
> >>> + }
> >>> +
> >>> + dev->m2m_dev_enc = v4l2_m2m_init(&mtk_venc_m2m_ops);
> >>> + if (IS_ERR(dev->m2m_dev_enc)) {
> >>> + mtk_v4l2_err("Failed to init mem2mem enc device\n");
> >>> + ret = PTR_ERR(dev->m2m_dev_enc);
> >>> + goto err_enc_mem_init;
> >>> + }
> >>> +
> >>> + dev->encode_workqueue =
> >>> + alloc_ordered_workqueue(MTK_VCODEC_ENC_NAME, WQ_MEM_RECLAIM | WQ_FREEZABLE);
> >>> + if (!dev->encode_workqueue) {
> >>> + mtk_v4l2_err("Failed to create encode workqueue\n");
> >>> + ret = -EINVAL;
> >>> + goto err_event_workq;
> >>> + }
> >>> +
> >>> + return 0;
> >>> +
> >>> +err_event_workq:
> >>> + v4l2_m2m_release(dev->m2m_dev_enc);
> >>> +err_enc_mem_init:
> >>> + vb2_dma_contig_cleanup_ctx(dev->alloc_ctx);
> >>> +err_vb2_ctx_init:
> >>> + video_unregister_device(vfd_enc);
> >>> +err_enc_reg:
> >>> + video_device_release(vfd_enc);
> >>> +err_enc_alloc:
> >>> + v4l2_device_unregister(&dev->v4l2_dev);
> >>> +err_res:
> >>> + mtk_vcodec_release_enc_pm(dev);
> >>> + return ret;
> >>> +}
> >>> +
> >>> +static const struct of_device_id mtk_vcodec_match[] = {
> >>> + {.compatible = "mediatek,mt8173-vcodec-enc",},
> >>> + {},
> >>> +};
> >>> +MODULE_DEVICE_TABLE(of, mtk_vcodec_match);
> >>> +
> >>> +static int mtk_vcodec_remove(struct platform_device *pdev)
> >>> +{
> >>> + struct mtk_vcodec_dev *dev = platform_get_drvdata(pdev);
> >>> +
> >>> + mtk_v4l2_debug_enter();
> >>> + flush_workqueue(dev->encode_workqueue);
> >>> + destroy_workqueue(dev->encode_workqueue);
> >>> + if (dev->m2m_dev_enc)
> >>> + v4l2_m2m_release(dev->m2m_dev_enc);
> >>> + if (dev->alloc_ctx)
> >>> + vb2_dma_contig_cleanup_ctx(dev->alloc_ctx);
> >>> +
> >>> + if (dev->vfd_enc) {
> >>> + video_unregister_device(dev->vfd_enc);
> >>> + video_device_release(dev->vfd_enc);
> >>> + }
> >>> + v4l2_device_unregister(&dev->v4l2_dev);
> >>> + mtk_vcodec_release_enc_pm(dev);
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static struct platform_driver mtk_vcodec_driver = {
> >>> + .probe = mtk_vcodec_probe,
> >>> + .remove = mtk_vcodec_remove,
> >>> + .driver = {
> >>> + .name = MTK_VCODEC_ENC_NAME,
> >>> + .owner = THIS_MODULE,
> >>> + .of_match_table = mtk_vcodec_match,
> >>> + },
> >>> +};
> >>> +
> >>> +module_platform_driver(mtk_vcodec_driver);
> >>> +
> >>> +
> >>> +MODULE_LICENSE("GPL v2");
> >>> +MODULE_DESCRIPTION("Mediatek video codec V4L2 driver");
> >>
> >> <snip>
> >>
> >> Regards,
> >>
> >> Hans
> >
> > best regards,
> > Tiffany
> >
>
> BTW, thanks for all the hard work! It's always great to see a company upstream drivers
> for their hardware. And again apologies for the long delay in reviewing.
>
> Regards,
>
> Hans
best regards,
Tiffany
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists