| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 16 Dec 2015 08:43:47 -0800
From: Peter Hurley <peter@...leysoftware.com>
To: Anton Wuerfel <anton.wuerfel@....de>
Cc: linux-serial@...r.kernel.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.com>,
"James E.J. Bottomley" <jejb@...isc-linux.org>,
Helge Deller <deller@....de>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Qipeng Zha <qipeng.zha@...el.com>,
Desmond Liu <desmondl@...adcom.com>,
Wang Long <long.wanglong@...wei.com>,
Matt Redfearn <matt.redfearn@...tec.com>,
Paul Burton <paul.burton@...tec.com>,
Ralf Baechle <ralf@...ux-mips.org>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Peter Hung <hpeter@...il.com>,
Soeren Grunewald <soeren.grunewald@...y.de>,
Adam Lee <adam.lee@...onical.com>,
"Maciej S. Szmigiero" <mail@...iej.szmigiero.name>,
Mans Rullgard <mans@...sr.com>, linux-kernel@...r.kernel.org,
linux-parisc@...r.kernel.org, linux-kernel@...cs.fau.de,
Phillip Raffeck <phillip.raffeck@....de>
Subject: Re: [PATCH 01/11] tty: serial: 8250: Fix whitespace errors
Hi Anton,
On 12/16/2015 07:36 AM, Anton Wuerfel wrote:
> This patch fixes whitespace errors reported by checkpatch to increase
> readability. Main focus is on missing spaces after commas in
> function headers and macros (like foo,bar edited to foo, bar).
Comments below.
> Signed-off-by: Anton Würfel <anton.wuerfel@....de>
> Signed-off-by: Phillip Raffeck <phillip.raffeck@....de>
> CC: linux-kernel@...cs.fau.de
> ---
> drivers/tty/serial/8250/8250_accent.c | 2 +-
> drivers/tty/serial/8250/8250_acorn.c | 2 +-
> drivers/tty/serial/8250/8250_boca.c | 2 +-
> drivers/tty/serial/8250/8250_core.c | 1 +
> drivers/tty/serial/8250/8250_dw.c | 6 +++
> drivers/tty/serial/8250/8250_exar_st16c554.c | 2 +-
> drivers/tty/serial/8250/8250_fourport.c | 2 +-
> drivers/tty/serial/8250/8250_hp300.c | 1 +
> drivers/tty/serial/8250/8250_hub6.c | 2 +-
> drivers/tty/serial/8250/8250_pci.c | 7 +++-
> drivers/tty/serial/8250/8250_port.c | 3 ++
> drivers/tty/serial/8250/serial_cs.c | 58 ++++++++++++++--------------
> 12 files changed, 52 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_accent.c b/drivers/tty/serial/8250/8250_accent.c
> index 34b51c6..c480729 100644
> --- a/drivers/tty/serial/8250/8250_accent.c
> +++ b/drivers/tty/serial/8250/8250_accent.c
> @@ -10,7 +10,7 @@
> #include <linux/init.h>
> #include <linux/serial_8250.h>
>
> -#define PORT(_base,_irq) \
> +#define PORT(_base, _irq) \
ok
> { \
> .iobase = _base, \
> .irq = _irq, \
> diff --git a/drivers/tty/serial/8250/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c
> index 549aa07..402dfdd 100644
> --- a/drivers/tty/serial/8250/8250_acorn.c
> +++ b/drivers/tty/serial/8250/8250_acorn.c
> @@ -70,7 +70,7 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
> uart.port.regshift = 2;
> uart.port.dev = &ec->dev;
>
> - for (i = 0; i < info->num_ports; i ++) {
> + for (i = 0; i < info->num_ports; i++) {
Ok
> uart.port.membase = info->vaddr + type->offset[i];
> uart.port.mapbase = bus_addr + type->offset[i];
>
> diff --git a/drivers/tty/serial/8250/8250_boca.c b/drivers/tty/serial/8250/8250_boca.c
> index d125dc1..e42a5b5 100644
> --- a/drivers/tty/serial/8250/8250_boca.c
> +++ b/drivers/tty/serial/8250/8250_boca.c
> @@ -10,7 +10,7 @@
> #include <linux/init.h>
> #include <linux/serial_8250.h>
>
> -#define PORT(_base,_irq) \
> +#define PORT(_base, _irq) \
Ok
> { \
> .iobase = _base, \
> .irq = _irq, \
> diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
> index 3912646..89a20c9 100644
> --- a/drivers/tty/serial/8250/8250_core.c
> +++ b/drivers/tty/serial/8250/8250_core.c
> @@ -756,6 +756,7 @@ void serial8250_suspend_port(int line)
> if (!console_suspend_enabled && uart_console(port) &&
> port->type != PORT_8250) {
> unsigned char canary = 0xa5;
> +
Not ok.
> serial_out(up, UART_SCR, canary);
> if (serial_in(up, UART_SCR) == canary)
> up->canary = canary;
> diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
> index a5d319e..0f67355 100644
> --- a/drivers/tty/serial/8250/8250_dw.c
> +++ b/drivers/tty/serial/8250/8250_dw.c
> @@ -102,8 +102,10 @@ static void dw8250_serial_out(struct uart_port *p, int offset, int value)
> /* Make sure LCR write wasn't ignored */
> if (offset == UART_LCR) {
> int tries = 1000;
> +
Not ok.
> while (tries--) {
> unsigned int lcr = p->serial_in(p, UART_LCR);
> +
> if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
> return;
> dw8250_force_idle(p);
> @@ -143,8 +145,10 @@ static void dw8250_serial_outq(struct uart_port *p, int offset, int value)
> /* Make sure LCR write wasn't ignored */
> if (offset == UART_LCR) {
> int tries = 1000;
> +
Not ok.
> while (tries--) {
> unsigned int lcr = p->serial_in(p, UART_LCR);
> +
Not ok.
In particular, I dislike separation between initialized variables and
following statements, _especially_ when the initialization is non-trivial.
> if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
> return;
> dw8250_force_idle(p);
> @@ -166,8 +170,10 @@ static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
> /* Make sure LCR write wasn't ignored */
> if (offset == UART_LCR) {
> int tries = 1000;
> +
Not ok.
> while (tries--) {
> unsigned int lcr = p->serial_in(p, UART_LCR);
> +
Not ok.
> if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
> return;
> dw8250_force_idle(p);
> diff --git a/drivers/tty/serial/8250/8250_exar_st16c554.c b/drivers/tty/serial/8250/8250_exar_st16c554.c
> index bf53aab..999f2d3 100644
> --- a/drivers/tty/serial/8250/8250_exar_st16c554.c
> +++ b/drivers/tty/serial/8250/8250_exar_st16c554.c
> @@ -13,7 +13,7 @@
> #include <linux/init.h>
> #include <linux/serial_8250.h>
>
> -#define PORT(_base,_irq) \
> +#define PORT(_base, _irq) \
Ok
> { \
> .iobase = _base, \
> .irq = _irq, \
> diff --git a/drivers/tty/serial/8250/8250_fourport.c b/drivers/tty/serial/8250/8250_fourport.c
> index be15826..9a04a8a 100644
> --- a/drivers/tty/serial/8250/8250_fourport.c
> +++ b/drivers/tty/serial/8250/8250_fourport.c
> @@ -10,7 +10,7 @@
> #include <linux/init.h>
> #include <linux/serial_8250.h>
>
> -#define PORT(_base,_irq) \
> +#define PORT(_base, _irq) \
Ok
> { \
> .iobase = _base, \
> .irq = _irq, \
> diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c
> index 2891958..38d8cb2 100644
> --- a/drivers/tty/serial/8250/8250_hp300.c
> +++ b/drivers/tty/serial/8250/8250_hp300.c
> @@ -125,6 +125,7 @@ int __init hp300_setup_serial_console(void)
> } else {
> #ifdef CONFIG_HPDCA
> unsigned long pa = dio_scodetophysaddr(scode);
> +
> if (!pa)
> return 0;
Not ok.
This is a particularly good example of how bad that style is.
The relevant code is the call to dio_scode_tophysaddr() _not the if (!pa)_
Newline after uninitialized vars - ok.
Newline after initialized vars - not ok. Unless trivial initialization and
you wrote it.
> diff --git a/drivers/tty/serial/8250/8250_hub6.c b/drivers/tty/serial/8250/8250_hub6.c
> index a5c778e..27124e2 100644
> --- a/drivers/tty/serial/8250/8250_hub6.c
> +++ b/drivers/tty/serial/8250/8250_hub6.c
> @@ -10,7 +10,7 @@
> #include <linux/init.h>
> #include <linux/serial_8250.h>
>
> -#define HUB6(card,port) \
> +#define HUB6(card, port) \
ok
> { \
> .iobase = 0x302, \
> .irq = 3, \
> diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
> index 4097f3f..ed99fdf 100644
> --- a/drivers/tty/serial/8250/8250_pci.c
> +++ b/drivers/tty/serial/8250/8250_pci.c
> @@ -113,6 +113,7 @@ static int addidata_apci7800_setup(struct serial_private *priv,
> struct uart_8250_port *port, int idx)
> {
> unsigned int bar = 0, offset = board->first_offset;
> +
not ok
> bar = FL_GET_BASE(board->flags);
>
> if (idx < 2) {
> @@ -1115,6 +1116,7 @@ static struct quatech_feature quatech_cards[] = {
> static int pci_quatech_amcc(u16 devid)
> {
> struct quatech_feature *qf = &quatech_cards[0];
> +
not ok
> while (qf->devid) {
> if (qf->devid == devid)
> return qf->amcc;
> @@ -1200,6 +1202,7 @@ static int pci_quatech_test(struct uart_8250_port *port)
> {
> u8 reg;
> u8 qopr = pci_quatech_rqopr(port);
> +
Swap the declaration order and its ok. IOW,
+ u8 qopr = pci_quatech_rqopr(port);
+ u8 reg;
+
or even better
+ u8 reg, qopr;
+
+ qopr = pci_quatech_rqopr(port);
> pci_quatech_wqopr(port, qopr & QPCR_TEST_FOR1);
> reg = pci_quatech_rqopr(port) & 0xC0;
> if (reg != QPCR_TEST_GET1)
> @@ -1284,8 +1287,10 @@ static int pci_quatech_init(struct pci_dev *dev)
> {
> if (pci_quatech_amcc(dev->device)) {
> unsigned long base = pci_resource_start(dev, 0);
> +
not ok
> if (base) {
> u32 tmp;
> +
ok
> outl(inl(base + 0x38) | 0x00002000, base + 0x38);
> tmp = inl(base + 0x3c);
> outl(tmp | 0x01000000, base + 0x3c);
> @@ -4502,7 +4507,7 @@ static struct pci_device_id serial_pci_tbl[] = {
> PCI_ANY_ID, PCI_ANY_ID, 0, 0,
> pbn_b0_bt_2_921600 },
> { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958,
> - PCI_ANY_ID , PCI_ANY_ID, 0, 0,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0,
ok
> pbn_b2_8_1152000 },
>
> /*
> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
> index 52d82d2..ae8f993 100644
> --- a/drivers/tty/serial/8250/8250_port.c
> +++ b/drivers/tty/serial/8250/8250_port.c
> @@ -1327,6 +1327,7 @@ static void serial8250_start_tx(struct uart_port *port)
>
> if (up->bugs & UART_BUG_TXEN) {
> unsigned char lsr;
> +
ok
> lsr = serial_in(up, UART_LSR);
> up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
> if (lsr & UART_LSR_THRE)
> @@ -1734,8 +1735,10 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
> /* Wait up to 1s for flow control if necessary */
> if (up->port.flags & UPF_CONS_FLOW) {
> unsigned int tmout;
> +
ok
> for (tmout = 1000000; tmout; tmout--) {
> unsigned int msr = serial_in(up, UART_MSR);
> +
not ok
> up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;
> if (msr & UART_MSR_CTS)
> break;
> diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
> index 4d180c9..f5270ba 100644
> --- a/drivers/tty/serial/8250/serial_cs.c
> +++ b/drivers/tty/serial/8250/serial_cs.c
> @@ -257,7 +257,7 @@ static const struct serial_quirk quirks[] = {
> };
>
>
> -static int serial_config(struct pcmcia_device * link);
> +static int serial_config(struct pcmcia_device *link);
ok
>
>
> static void serial_remove(struct pcmcia_device *link)
> @@ -309,7 +309,7 @@ static int serial_probe(struct pcmcia_device *link)
> dev_dbg(&link->dev, "serial_attach()\n");
>
> /* Create new serial device */
> - info = kzalloc(sizeof (*info), GFP_KERNEL);
> + info = kzalloc(sizeof(*info), GFP_KERNEL);
ok
> if (!info)
> return -ENOMEM;
> info->p_dev = link;
> @@ -339,7 +339,7 @@ static void serial_detach(struct pcmcia_device *link)
>
> /*====================================================================*/
>
> -static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
> +static int setup_serial(struct pcmcia_device *handle, struct serial_info *info,
ok
> unsigned int iobase, int irq)
> {
> struct uart_8250_port uart;
> @@ -600,7 +600,7 @@ static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data)
> }
>
>
> -static int serial_config(struct pcmcia_device * link)
> +static int serial_config(struct pcmcia_device *link)
ok
> {
> struct serial_info *info = link->priv;
> int i;
> @@ -701,7 +701,7 @@ static const struct pcmcia_device_id serial_ids[] = {
> PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
> PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
> PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
> - PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
> + PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001", 0x18df0ba0, 0x831b1064),
ok
> PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
> PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
> PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
> @@ -797,30 +797,30 @@ static const struct pcmcia_device_id serial_ids[] = {
> PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
> PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
> PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
> - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b),
> - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
> - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490),
> - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235),
> - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3),
> - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442),
> - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190),
> - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262),
> - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d),
> - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa),
> - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903),
> - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676),
> - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767),
> - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
> - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
> - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
> - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
> - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
> - PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
> - PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
> - PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
> - PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
> - PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
> - PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
> + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100 1.00.", 0x19ca78af, 0xf964f42b),
> + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100", 0x19ca78af, 0x71d98e83),
> + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232 1.00.", 0x19ca78af, 0x69fb7490),
> + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232", 0x19ca78af, 0xb6bc0235),
> + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232", 0x63f2e0bd, 0xb9e175d3),
> + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232-5", 0x63f2e0bd, 0xfce33442),
> + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232", 0x3beb8cf2, 0x171e7190),
> + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232-5", 0x3beb8cf2, 0x20da4262),
> + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF428", 0x3beb8cf2, 0xea5dd57d),
> + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF500", 0x3beb8cf2, 0xd77255fa),
> + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: IC232", 0x3beb8cf2, 0x6a709903),
> + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: SL232", 0x3beb8cf2, 0x18430676),
> + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: XL232", 0x3beb8cf2, 0x6f933767),
> + PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7),
> + PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41),
> + PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029),
> + PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
> + PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial+Parallel Port: SP230", 0x3beb8cf2, 0xdb9e58bc),
> + PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7),
> + PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41),
> + PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029),
> + PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
> + PCMCIA_MFC_DEVICE_PROD_ID12(2, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
> + PCMCIA_MFC_DEVICE_PROD_ID12(3, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
> PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
> /* too generic */
> /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
ok
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists