[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1450287568-19808-27-git-send-email-kamal@canonical.com>
Date: Wed, 16 Dec 2015 09:37:46 -0800
From: Kamal Mostafa <kamal@...onical.com>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org,
kernel-team@...ts.ubuntu.com
Cc: Rajmohan Mani <rajmohan.mani@...el.com>,
Mathias Nyman <mathias.nyman@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Kamal Mostafa <kamal@...onical.com>
Subject: [PATCH 3.19.y-ckt 026/128] xhci: Workaround to get Intel xHCI reset working more reliably
3.19.8-ckt12 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Rajmohan Mani <rajmohan.mani@...el.com>
commit a5964396190d0c40dd549c23848c282fffa5d1f2 upstream.
Existing Intel xHCI controllers require a delay of 1 mS,
after setting the CMD_RESET bit in command register, before
accessing any HC registers. This allows the HC to complete
the reset operation and be ready for HC register access.
Without this delay, the subsequent HC register access,
may result in a system hang, very rarely.
Verified CherryView / Braswell platforms go through over
5000 warm reboot cycles (which was not possible without
this patch), without any xHCI reset hang.
Signed-off-by: Rajmohan Mani <rajmohan.mani@...el.com>
Tested-by: Joe Lawrence <joe.lawrence@...atus.com>
Signed-off-by: Mathias Nyman <mathias.nyman@...ux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@...onical.com>
---
drivers/usb/host/xhci.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 0612a5b..6358446 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -176,6 +176,16 @@ int xhci_reset(struct xhci_hcd *xhci)
command |= CMD_RESET;
writel(command, &xhci->op_regs->command);
+ /* Existing Intel xHCI controllers require a delay of 1 mS,
+ * after setting the CMD_RESET bit, and before accessing any
+ * HC registers. This allows the HC to complete the
+ * reset operation and be ready for HC register access.
+ * Without this delay, the subsequent HC register access,
+ * may result in a system hang very rarely.
+ */
+ if (xhci->quirks & XHCI_INTEL_HOST)
+ udelay(1000);
+
ret = xhci_handshake(xhci, &xhci->op_regs->command,
CMD_RESET, 0, 10 * 1000 * 1000);
if (ret)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists