lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Thu, 17 Dec 2015 15:15:12 +0200
From:	Andy Shevchenko <andy.shevchenko@...il.com>
To:	Vladimir Murzin <vladimir.murzin@....com>
Cc:	Arnd Bergmann <arnd@...db.de>,
	Russell King <linux@....linux.org.uk>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Daniel Lezcano <daniel.lezcano@...aro.org>,
	Thomas Gleixner <tglx@...utronix.de>,
	Uwe Kleine-König 
	<u.kleine-koenig@...gutronix.de>,
	Andreas Färber <afaerber@...e.de>,
	Maxime Coquelin <mcoquelin.stm32@...il.com>,
	Mark Rutland <Mark.Rutland@....com>,
	Pawel Moll <Pawel.Moll@....com>,
	"ijc+devicetree" <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>, Jiri Slaby <jslaby@...e.cz>,
	Rob Herring <robh+dt@...nel.org>,
	devicetree <devicetree@...r.kernel.org>,
	"linux-serial@...r.kernel.org" <linux-serial@...r.kernel.org>,
	"linux-api@...r.kernel.org" <linux-api@...r.kernel.org>,
	linux-arm Mailing List <linux-arm-kernel@...ts.infradead.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v1 04/10] serial: mps2-uart: add MPS2 UART driver

On Tue, Dec 15, 2015 at 2:40 PM, Vladimir Murzin
<vladimir.murzin@....com> wrote:
> On 12/12/15 23:39, Andy Shevchenko wrote:
>> On Wed, Dec 2, 2015 at 11:33 AM, Vladimir Murzin
>> <vladimir.murzin@....com> wrote:
>>> This driver adds support to the UART controller found on ARM MPS2
>>> platform.
>>
>> Just few comments (have neither time not big desire to do full review).
>>
>
> Still better than nothing ;) I'm mostly agree on points you had, so I've
> just left some I'm doubt about...
>
>>> +
>>> +static void mps2_uart_enable_ms(struct uart_port *port)
>>> +{
>>> +}
>>> +
>>> +static void mps2_uart_break_ctl(struct uart_port *port, int ctl)
>>> +{
>>> +}
>>
>> Are those required to be present? If not, remove them until you have
>> alive code there.
>
> A quick grep shows that core calls mps2_uart_break_ctl()
> unconditionally, but, yes, it checks for presence of
> mps2_uart_enable_ms() before jumping there, so it is safe to remove latter.

OK.

>>> +static irqreturn_t mps2_uart_oerrirq(int irq, void *data)
>>> +{
>>> +       irqreturn_t handled = IRQ_NONE;
>>> +       struct uart_port *port = data;
>>> +       u8 irqflag = mps2_uart_read8(port, UARTn_INT);
>>> +
>>> +       spin_lock(&port->lock);
>>> +
>>> +       if (irqflag & UARTn_INT_RX_OVERRUN) {
>>> +               struct tty_port *tport = &port->state->port;
>>> +
>>> +               mps2_uart_write8(port, UARTn_INT_RX_OVERRUN, UARTn_INT);
>>> +               tty_insert_flip_char(tport, 0, TTY_OVERRUN);
>>> +               port->icount.overrun++;
>>> +               handled = IRQ_HANDLED;
>>> +       }
>>> +
>>> +       /* XXX: this shouldn't happen? */
>>
>> If shouldn't why it's there? Otherwise better to explain which
>> conditions may lead to this.
>>
>
> In practice I've never seen that happened and I think it never *should*
> happen since we check if there is room in TX buffer. However, I could be
> wrong here, so it is why that statement has question mark.

So, worth to have a proper comment then.

>>> +static int __init mps2_uart_init(void)
>>> +{
>>> +       int ret;
>>> +
>>> +       ret = uart_register_driver(&mps2_uart_driver);
>>> +       if (ret)
>>> +               return ret;
>>> +
>>> +       ret = platform_driver_register(&mps2_serial_driver);
>>> +       if (ret)
>>> +               uart_unregister_driver(&mps2_uart_driver);
>>> +
>>> +       pr_info("MPS2 UART driver initialized\n");
>>> +
>>> +       return ret;
>>> +}
>>> +module_init(mps2_uart_init);
>>> +
>>> +static void __exit mps2_uart_exit(void)
>>> +{
>>> +       platform_driver_unregister(&mps2_serial_driver);
>>> +       uart_unregister_driver(&mps2_uart_driver);
>>> +}
>>> +module_exit(mps2_uart_exit);
>>
>> module_platform_driver();
>> And move uart_*register calls to probe/remove.
>>
>
> With this move we'll get uart_*register for every device probed, no?

Don't see a problem, maybe someone else could share an authoritive opinion.
Some of the drivers do that, though most do in __init stage. So, see above.

-- 
With Best Regards,
Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists